• Energy Research
• 7. Clean energy close
• 6. Clean water close
• RU close
• EC close

Torrefaction is considered as a method for producing biofuels with improved characteristics compared to those of the “raw” biomass (higher calorific value, moisture resistance, better grindability). The torrefaction process is an endothermic process that is usually carried out in a gaseous atmosphere in the absence of oxygen. To reduce the required heat input, it is proposed to employ the oxidative torrefaction and conduct the process in a fluidized bed agitated with flue gases containing less than 6% oxygen. Preliminary studies of the oxidative torrefaction of sunflower husks, including thermogravimetric analysis of the treated material, have shown that the heat treatment time for the biomass should be at least 5 min. A fluidized bed is a reactor with ideal mixing of the treated material where uniform treatment of raw material particles cannot generally be attained. To overcome this disadvantage of the fluidization technique and achieve the required residence time for biomass in a fluidized bed during a continuous torrefaction process, it was proposed to equip a torrefaction reactor with a series of vertical baffles spaced at 50 mm. These baffles induce a loop-like flow of the processed biomass from the inlet to the outlet of the reactor. To investigate the residence time for husk particles in the reactor, a tracer, which was colored to husk particles' color with a water-soluble dye which did not change the weight and size of the particles, was injected into the bed of uncolored particles. Tracer samples were taken every 30 s at the outlet of the reactor and were analyzed using a special procedure to determine the fraction of colored particles in each sample. This enabled us to gauge the time during which the colored particles injected into the fluidized bed reached the point of their discharge from the bed. Studies performed in a “cold” model of the reactor showed that a series of vertical baffles in the bed can provide the required residence time for biomass in a reactor including commercial reactors. Plates can provide the necessary biomass residence time in the reactor.

The most severe failures in power grids are often characterized as cascading failures where an initial event triggers consequent failures all along the grid often leading to blackouts. Upon identifying a failure and its cascade potential, timely control actions should be performed by the grid operators to mitigate the effect of the cascade. These actions have to be delivered to one or more control devices, creating a dependency between the power grid and its control network. This paper examines the dependency of the operation of the power grid on the control network. Different from literature studies on failure control, our dependency model captures the impact of networking parameters. We formulate an algorithmic model that describes the impact of this dependency on cascade control. Based on this model, we propose an efficient cascade control algorithm using load shedding with consideration of delays in the communication network for power grids. Finally, we evaluate the impact of the power-communication network dependency with uncontrolled grids, ideal/simple control grids and our proposed control scheme. The results demonstrate that the proposed algorithm can significantly reduce the failure of power lines while sustaining larger power demand for users.

Abstract An ideal tracker which follows the sun both north-south and east-west is designed and constructed. It is suitable for mounting a linear concentrator, focusing parabolic concentrator or photovoltaic array of aperture area 2 m2. The apparatus is built with two axes equational mount and controlled by a microprocessor system. The tracking is carried out by utilizing the astronomical coordinates of the sun. As such the present system gives improved tracking capability over the conventional sensor controlled tracker systems. The performance of the tracking system was studied with photovoltaic array mounted on it and tracking error of less than one degree was achieved. This tracking error can be reduced further by proper software.

The formation and decay of excited states of light‐harvesting bacteriochlorophyll (BChl) molecules and primary charge separation in reaction centres (RCs) of pigment‐protein complex B890 of the purple bacterium Chromatium minutissimum were studied as a function of excitation wavelength by means of picosecond absorbance difference spectroscopy. Selective excitation in the RC absorption band (at 800 nm) induced rapid bleaching of the absorption band of the RC BChl dimer (τ ∼ 1 ps) without absorption changes due to excited light‐harvesting BChl. It is concluded that excitation energy transfer from the BChl dimer of the RC to light‐harvesting BChl molecules is considerably slower than RC charge separation. Therefore, energy transfer from the light‐harvesting antenna to the RC in bacterial photosynthesis may be described as a ‘migration‐limited model’.

Mining and mineral processing industry adversely affects ecosystems and communities in nearby areas, including high freshwater consumption and scarcity. That is why the emerging global trend is to use sea water in flotation to recover valuable minerals from finely disseminated base metals ores. Recent studies investigate sea water flotation of copper, molybdenum, nickel sulphides and pyrite, while flotation of sphalerite, the main valuable mineral for zinc production, remains uncovered. This paper examines the feasibility of sphalerite flotation by conventional collectors in artificial sea water using a bubble-particles technique and frothless flotation tests. Potassium isopropyl xanthate (PIPX) and sodium isopropyl dithiophosphate (SIDTP) were used as collectors, and copper sulphate was introduced as the activator, while zinc sulphate and sodium sulphide were used as depressants. We examined the most common size fractions of sphalerite: medium (−74 + 44 μm) and fines (−44 μm). The findings showed the feasibility of sphalerite flotation in artificial sea water. We also established correlations between the rate of bubble-particle attachment and the sphalerite flotation recovery resulting in the growth of flotation recovery with the increase of the bubble-particle attachment rate. The results can be used as guidelines in choosing flotation reagents for sphalerite flotation in sea water. Another practical application of the results is the potential for sustainable development of the industrial sector, ecosystems and societies due to the replacement of fresh water by sea water, although further technological and environmental studies are required.

We investigate the effect of slowly-varying parameter on the energy transfer in a system of weakly coupled nonlinear oscillators, with special attention to a mathematical analogy between the classical energy transfer and quantum transitions. For definiteness, we consider a system of two weakly coupled oscillators with cubic nonlinearity, in which the oscillator with constant parameters is excited by an initial impulse, while a coupled oscillator with slowly-varying parameters is initially at rest. It is proved that the equations of the slow passage through resonance in this system are identical to equations of the nonlinear Landau-Zener (LZ) tunneling. Three types of dynamical behavior are distinguished, namely, quasi-linear, moderately nonlinear and strongly nonlinear. The quasi-linear systems exhibit a gradual energy transfer from the excited to the attached oscillator, while the moderately nonlinear systems are characterized by an abrupt transition from the energy localization on the excited oscillator to the localization on the attached oscillator. In the strongly nonlinear systems, the transition from the energy localization to strong energy exchange between the oscillators is revealed. A special case of the rapid irreversible energy transfer in the strongly nonlinear system with slowly-varying parameters is also investigated. The conditions providing different types of the dynamical behavior are derived. Explicit approximate solutions describing the transient processes in moderately and strongly nonlinear systems are suggested. Correctness of the constructed approximations is confirmed by numerical results.

This research presents a 100% renewable energy (RE) scenario by 2050 with a high share of electric vehicles on the grid (V2G) developed in Ecuador with the support of the EnergyPLAN analysis tool. Hour-by-hour data iterations were performed to determine solutions among various features, including energy storage, V2G connections that spanned the distribution system, and long-term evaluation. The high participation in V2G connections keeps the electrical system available; meanwhile, the high proportions of variable renewable energy are the pillar of the joint electrical system. The layout of the sustainable mobility scenario and the high V2G participation maintain the balance of the electrical system during most of the day, simplifying the storage equipment requirements. Consequently, the influence of V2G systems on storage is a significant result that must be considered in the energy transition that Ecuador is developing in the long term. The stored electricity will not only serve as storage for future grid use. Additionally, the V2G batteries serve as a buffer between generation from diversified renewable sources and the end-use stage.

The Internet of Things (IoT) provides opportunities to control interconnected smart devices via pre-designed scenarios with littleor no human involvement. Due to the need for systematic improvement of industrial energy efficiency, the relevance of IoT-based energy management systems (EMS) is constantly increasing. Industrial IoT (IIoT)-enhanced EMS are created to support the digital transformation of enterprises. They increase the transparency of energy consumption statistics, enhance the personnel awareness of energy losses, provide predictive analytics tools for forecasting potential industrial accidents and future energy demand. This paper hence provides a system architecture of the energy management assistant that can be used at enterprises to archive the aforementioned aims. Authors identify the relevance of EMS, list the conditions at modern enterprises that define the requirements for the energy management assistant, demonstrate the identified requirements in the UML diagrams. Specification of energy planning and energy monitoring stages demonstrate the possibilities of the designed system architecture. For demonstration purposes, authors present examples of linear and nonlinear regression models implemented to specify energy consumption target functions based on real data. Finally, future research directions and open energy management problems are presented. The analysis has been carried out within the priority area of scientific development established in the National Research University Higher School of Economics - "Research on control methods in Cyber-Physical Systems".