• Energy Research
• 7. Clean energy close
• 13. Climate action close
• GB close
• ES close
• Applied Energy close

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

Abstract Specification by central government of the heating levels which are to be maintained in British school buildings has recently been altered. This paper is concerned with examining the nature of changes that have been made by comparing present requirements with their counterparts during the preceding one hundred years. Attention is focused on the apparently contradictory implications of these changes for those charged with responsibility for maintaining heating levels in school buildings while, at the same time, conserving fuel. It is suggested that the new statutory requirements present those who are responsible with a duty which may, in practical terms, prove difficult or costly to discharge. Although discussion is specifically restricted to British school buildings, issues are raised which are pertinent to attempts to integrate regulation of heating with control of fuel consumption in other types of non-domestic buildings both in Britain and abroad.

Thermal generation is a vital component of mature and reliable electricity markets. As the share of renewable electricity in such markets grows, so too do the challenges associated with its variability. Proposed solutions to these challenges typically focus on alternatives to primary generation, such as energy storage, demand side management, or increased interconnection. Less attention is given to the demands placed on conventional thermal generation or its potential for increased flexibility. However, for the foreseeable future, conventional plants will have to operate alongside new renewables and have an essential role in accommodating increasing supply-side variability.\ud \ud This paper explores the role that conventional generation has to play in managing variability through the sub-system case study of Northern Ireland, identifying the significance of specific plant characteristics for reliable system operation. Particular attention is given to the challenges of wind ramping and the need to avoid excessive wind curtailment. Potential for conflict is identified with the role for conventional plant in addressing these two challenges. Market specific strategies for using the existing fleet of generation to reduce the impact of renewable resource variability are proposed, and wider lessons from the approach taken are identified.

The optimal selection, sizing, and location of small-scale technologies within a grid-connected distributed energy system (DES) can contribute to reducing carbon emissions, consumer costs, and network imbalances. This is the first study to present an optimisation framework for obtaining discrete technology sizing and selection for grid-connected DES design, while simultaneously considering multiphase optimal power flow (MOPF) constraints to accurately represent unbalanced low-voltage distribution networks. An algorithm is developed to solve the resulting Mixed-Integer Nonlinear Programming (MINLP) formulation. It employs a decomposition based on Mixed-Integer Linear Programming (MILP) and Nonlinear Programming (NLP), and utilises integer cuts and complementarity reformulations to obtain discrete designs that are also feasible with respect to the network constraints. A heuristic modification to the original algorithm is also proposed to improve computational speed. Improved formulations for selecting feasible combinations of air source heat pumps (ASHPs) and hot water storage tanks are also presented. The algorithms outperform the existing state-of-the-art commercial MINLP solver, which fails to find any solutions in two instances. While feasible solutions were obtained for all cases, convergence was not achieved for all, especially for those involving the larger network. Where converged, the algorithm with the heuristic modification has achieved results up to 70% faster than the original algorithm. Results for case studies suggest that including ASHPs can support up to 16% higher renewable generation capacity compared to gas boilers, albeit with higher ASHP investment costs. The optimisation framework and results can be used to inform stakeholders such as policy-makers and network operators, to increase renewable energy capacity and aid the decarbonisation of domestic heating systems. 47 pages, 10 figures, 14 Tables

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

Abstract Most of the current Stirling-type pulse tube refrigerators (PTRs) adopt inertance tubes with large reservoirs for phase shifting. Recovering the acoustic power dissipated in the inertance tube provides a great potential for improving the efficiency of a PTR. In this study, an inertance tube PTR is modified by replacing the dissipative inertance tube and reservoir with a mass-spring displacer directly coupled to a compression space. Numerical simulations are conducted on both the PTRs based on a validated one-dimensional computational fluid dynamics model. Optimization of the inertance tube PTR shows that the coefficient of performance (COP) is limited within 0.103 at the cooling temperature of 77 K. The simulation of the PTR with the feedback mechanism indicates that COP can be significantly improved due to the extra power recovered by the mass-spring displacer. The parametric analyses of the moving mass, spring stiffness, mechanical resistance, piston diameter, and working frequency of the mass-spring displacer are finally performed. The phase relations at both ends of the regenerator are significantly influenced by the geometric and operating parameters, which further affect the performance. The designing parameters have been optimized, COP reaches about 0.13–0.14 with the relative Carnot COP of around 0.4. It demonstrates that adopting the mass-spring displacer to feed the expansion power back into the compression space is an effective way of improving the performance of PTRs. This work provides comprehensive understanding of the mechanisms and characteristics of the PTRs with the mass-spring displacer. It would be helpful for future designs of such systems.

Nowadays, the photovoltaic technology level development makes it the best option for its building integration as energy supplier. Nevertheless, its aesthetic appearance plays a relevant role because architect requirements go beyond the simple installation of solar devices on terraces. In order to fulfill their requirements, the typical white backsheet uses to be replaced by a black one. This simple change leads to a huge PV module performance reduction. In this work, it has been demonstrated that a suitable material selection allows to fabricate photo voltaic modules with a high architectonic integration, but without power reduction with respect to the most commercial solar devices. The former consists in the replacement of the typical glass front cover and the white backsheet by an antireflective glass and a black backsheet respectively. All the study has been developed on real size photovoltaic modules fabricated in an automatic line. The obtained results determine that those modules where black backsheets are used, suffer a power reduction equal to 8.66 W per fabricated module. Nevertheless, when in addition of the black backsheet an antireflective coating glass is implemented, the resulted PV modules present a more aesthetic presence without a detrimental of their power performance when they are compared to the standard PV modules. Additionally, the fabricated solar devices using the proposed configuration successfully overcome the most common aging tests. Política de acceso abierto tomada de: https://openpolicyfinder.jisc.ac.uk/id/publication/11131

Abstract A coiled-pipe exchanger was employed to extract heat rapidly at relatively high temperatures from a 90-litre hot-water charged tank, the water being initially at a temperature of approximately 80°C. The free-convective movements of the water around the outside of the coiled pipe (immersed in the store) were due to buoyancy forces induced by colder water being forced through the heat-exchanger's pipe. For the heat-exchanger orientations tested, the maximum effectiveness, with respect to the quality of the heat extracted was achieved (i) by having the axis of the coiled heat-exchanger arranged horizontally with its inlet at the lowest level; and (ii) with the lower rate tested (=6·6 litre/min) of water being passed through the heat-exchanger's pipe, partly because this led to a lower rate of disruption of the stratification of the water within the store.