• Energy Research
• engineering and technology close
• 6. Clean water close
• 2. Zero hunger close
• ES close

[EN]A systematic approach is developed for the conceptual optimal design of biomethane production via carbon capture. A hybrid heuristic-mathematical procedure is proposed to determine the optimal technology and operating conditions. The heuristic step consists of a literature-based screening of the available technologies. After the prescreening stage, the technologies selected are amine absorption, pressure swing adsorption (PSA), and membrane separation. The mathematical stage is composed of two steps. First, different alternatives for each technology are modeled based on first principles and rules of thumb. These models are used to select the optimal configuration for each process considered. Second, a superstructure model for biomethane production is developed integrating the pre-selected upgrading technologies to select the optimal process, as well as to determine the optimal operating conditions. Four waste sources are analyzed: cattle manure, swine manure, municipal food waste, and sludge. The results suggest that the best amine is diethanolamine (DEA), the best membrane material is the polyimide, and the suggested zeolite is 13X among the ones studied. Finally, among the three technologies, the overall results show that carbon capture using a PSA system using zeolite 13X results in lower production and investment costs, but very close to the use of membranes. The results indicate that food waste shows the lowest production cost for biomethane 0.36 €/Nm3, due to the largest organic matter content, whereas the investment costs are 67 M€, considering a biogas production rate of 0.035 kg of biomethane per kg of waste and the processing of 311 kt/yr of food waste. Credits or incentives are still needed for biomethane to be competitive with fossil natural gas. Junta de Castilla y León y USAL

Hydraulic fracturing drilling technology can cause a high risk of surface spill accidents and thus water contamination. Climate change together with the high water demand and rapid increase in industrial and agricultural activities are valued reasons why we should all care about the availability of water resources and protect them from contamination. Hence, the purpose of this study is to estimate the risk associated with a site contaminated with benzene from oil spillage and its potential impact on groundwater. This study focused on investigating the impact of soil variability and water table depth on groundwater contamination. Temperature-dependent parameters, such as soil water content and the diffusion of pollutants, were considered as key input factors for the HYDRUS 1D numerical model to simulate benzene migration through three types of soil (loamy, sandy clay loam, and silt loam) and evaluate its concentration in the water aquifer. The results indicated that an anticipated increase in earth’s average surface temperature by 4 °C due to climate change could lead to a rise in the level of groundwater pollution in the study area by 0.017 mg/L in loamy soil, 0.00046 mg/L in sandy clay loam soil, and 0.00023 mg/L in silt loam soil. It was found that climate change can reduce the amount of benzene absorbed from 10 to 0.07% in loamy soil, 14 to 0.07% in sandy clay loam soil, and 60 to 53% in silt loam soil. The results showed that the soil properties and solute characteristics that depend on the temperature have a major and important role in determining the level of groundwater pollutants.

Although recent research has demonstrated that waste orange peel (WOP) is a potentially valuable resource that can be transformed into high value products, heat generation, biomethanisation and composting might be considered the most feasible alternatives in terms of yield. This study revealed that WOP can be successfully valorised through combustion. However, a previous drying step, which generates hazardous wastewater, is required and harmful NOx are emitted with the flue gases. In contrast, a high yield of renewable methane (280LSTPCH4/kg added COD, chemical oxygen demand) and an organic amendment can be obtained through the thermophilic biomethanisation of WOP following the removal of valuable essential oils from the peel. Co-composting of WOP combined at different proportions (17-83%) with the organic fraction of municipal solid waste (OFMSW) was also demonstrated to be suitable. Moreover, a 37% reduction in odour generation was observed in co-composting of WOP compared to single composting of OFMSW.

In membrane bioreactors applied to wastewater treatment, fouling is typically a complex function of sludge characteristics. A pilot-scale tertiary submerged membrane bioreactor (tMBR) was continuously operated for over 200 days to assess the effect of biomass physiological state and environmental stress on process performance. Sludge characteristics were evaluated in terms of suspended solid concentration (MLSS and MLVSS), apparent viscosity, bioflocculation state, filterability, bioactivity, biopolymeric clusters (BPCs) and soluble microbial products. During the initial period of the tMBR start-up, when MLSS was below 3000 mg/L, the biomass was found to be very sensitive to environmental stress by sudden oxygen increase or organic shock loading, resulting in temporary biomass deflocculation and BPC release, and consequently, severe induced membrane fouling. However, at higher MLSS values, low stable biomass growth (0.04 ± 0.002 kg MLVSS/kg COD) was measured, regardless of organic overloading shocks or feeding failures. This period was also characterised by low bioactivity, BPC content and membrane fouling. Statistical analysis showed that BPCs have an important role when compared with other sludge properties as indicators of its fouling potential.

Increasing demand for fuels and chemicals, driven by factors including over-population, the threat of global warming and the scarcity of fossil resources, strains our resource system and necessitates the development of sustainable and innovative strategies for the chemical industry. Our society is currently experiencing constraints imposed by our resource system, which drives industry to increase its overall efficiency by improving existing processes or finding new uses for waste. Food supply chain waste emerged as a resource with a significant potential to be employed as a raw material for the production of fuels and chemicals given the abundant volumes globally generated, its contained diversity of functionalised chemical components and the opportunity to be utilised for higher value applications. The present manuscript is aimed to provide a general overview of the current and most innovative uses of food supply chain waste, providing a range of worldwide case-studies from around the globe. These studies will focus on examples illustrating the use of citrus peel, waste cooking oil and cashew shell nut liquid in countries such as China, the UK, Tanzania, Spain, Greece or Morocco. This work emphasises 2nd generation food waste valorisation and re-use strategies for the production of higher value and marketable products rather than conventional food waste processing (incineration for energy recovery, feed or composting) while highlighting issues linked to the use of food waste as a sustainable raw material. The influence of food regulations on food supply chain waste valorisation will also be addressed as well as our society's behavior towards food supply chain waste. “There was no ways of dealing with it that have not been known for thousands of years. These ways are essentially four: dumping it, burning it, converting it into something that can be used again, and minimizing the volume of material goods – future garbage – that is produced in the first place.” William Rathje on waste (1945–2012) – Director of the Tucson Garbage project.

The global energy demand is growing substantially. Clean and secure energy supply is a must for our civilization's sustainable development. Solar and wind energy is growing fast and can contribute significantly to meet the goals set by many countries to reduce greenhouse gas emissions. A deep and wide investigation of the environmental impact of solar and wind energy is important before any solar or wind plants' construction is made. In this study, the literature is reviewed to summarize the environmental impact of solar and wind energy systems in terms of the following factors; land use, water consumption, impact on biodiversity, visual and noise effects, health issues, and impact on micro climate. Although the benefits of solar and wind energy are obvious and great, negative perception of these technologies can inhibit their wide penetration in some regions. This review paper includes a critical and an inclusive analysis of solar and wind energy’s environmental impact and may serve as an important tool to conduct a proper environmental impact assessment. This critical analysis may serve also as a tool for developers, policy, and decision-when planning future solar and wind farms.

The biotechnological development has traditionally focused on the compliance with regulatory demands rather than optimising the processes or analysing their sustainability. This work proposes the combination of available tools for the comprehensive sustainability assessment of a blue biotechnology process based on the cultivation of the microalgae Haematococcus pluvialis. The work aims to include environmental, economic and social dimensions to measure the sustainability of the production of a carotenoid with potential applications in food, nutraceutical, cosmetics and eventually pharmaceutical industries. Electricity for cultivation was identified as the major contributor to the environmental impacts, which depended significantly on the production scale. Social benefits were mainly related to workers and consumers, while the economic assessment suggested a profitable process with a relatively short period to recover the initial investment.

Abstract Pyrolysis is currently being considered as an alternative method of treating sewage sludge. It yields residual oils and gases, which can be used as fuels, and a solid which can either be burned or physically activated with air or CO 2 . The aim of this work was to study the influence of different pyrolysis conditions (e.g. temperature and heating rate) on the reactivity in air and in CO 2 of carbonaceous materials obtained from these types of residues. An anaerobic sewage sludge produced in a Spanish urban waste water treatment plant, containing 5 wt.% moisture after air-drying, was pyrolyzed in an electrical laboratory furnace under different pyrolysis conditions. Non-isothermal reactivities (up to 1100°C) in air and in CO 2 of the carbonaceous materials obtained after pyrolysis were performed in a thermobalance. The TG and DTG curves obtained from these experiments are discussed.