• Energy Research
• other engineering and technologies close
• 12. Responsible consumption close
• 6. Clean water close
• 1. No poverty close
• ES close

Construction involves the use of significant quantities of raw materials and entails high-energy consumption. For the sake of choosing the most appropriate solution that considers environmental and sustainable concepts, tools such as the integrated value model for sustainable assessment (Modelo Integrado de Valor para una Evaluación Sostenible, MIVES) used in Spain, plays a key role in obtaining the best solution. MIVES is a multi-criteria decision-making method based on the value function concept and the seminars delivered by experts. Such tools, in order to show how they may work, require application to case studies. In this paper, two concrete slabs manufactured with differing reinforcements during the construction of the La Canda Tunnels are compared by means of MIVES. The two concrete slabs were reinforced with a conventional steel-mesh and with polyolefin fibres. This research was focussed on the main aspects affecting the construction. That is to say, the environmental, economic, and social factors were assessed by the method, being of special impact the issues related with maintenance of the structure. The results showed that from the point of view of sustainability, the use of polyolefin fibres provided a significant advantage, mainly due to the lower maintenance required.

This work evaluates, for the first time, the possibility of producing multifunctional alkali-activated composites combining ultra-low density, low thermal conductivity, high acoustic absorption, and good moisture buffering capacity. The composites were prepared using cork as a lightweight aggregate. This novel material might promote energy savings and tackle the CO2 emissions of the building sector, while simultaneously improve the comfort for inhabitants (e.g. humidity levels regulation and sound pollution reduction). The composites apparent density (as low as 168 kg/m3) and thermal conductivity (as low as 68 mW/m K) are amongst the lowest ever reported for alkali-activated materials (AAM) composites and foams, while their sound absorption ability is comparable to the best performing AAM foams reported to date, but in addition these eco-friendly composites also show good ability to passively adjust the humidity levels inside buildings. The multifunctional properties shown by the cork – AAM composites set them apart from other conventional building materials and might contribute to the global sustainability of the construction sector. Peer Reviewed

The lack of real integration between the different dimensions of sustainability is highlighted in the literature as one of the main hindrances to lessening the environmental risks and impacts of large-scale development projects. This paper discusses a hypothesis concerning the problems of integration between the different dimensions of sustainability in socio-environmental research into such projects. Differences in modes of knowledge production and the relationships of these with prevailing social positions constitute the crux of the argument. Endeavours to improve translational knowledge and mixed research methodologies (seeking the semi-standardization of research processes) are put forward as approaches to overcoming the above-mentioned obstacles.

Ammonia increases buffer capacity of methanogenic medium in mesophilic anaerobic reactor thus increasing the stability of anaerobic digestion process. Optimal ammonia concentration ensures sufficient buffer capacity while not inhibiting the process. It was found out in this paper that this optimum depends on the quality of anaerobic sludge under investigation. The optimal concentrations for methanogens were 2.1, 2.6 and 3.1 g/L of ammonia nitrogen in dependence on inoculum origin. High ammonia nitrogen concentration (4.0 g/L) inhibited methane production, while low ammonia nitrogen concentration (0.5 g/L) caused low methane yield, loss of biomass (as VSS) and loss of the aceticlastic methanogenic activity. It was found out that negative effect of low ammonia nitrogen concentration on biomass is caused not only by low buffer capacity but also by insufficiency of nitrogen as nutrient. It was also found out that anaerobic sludge with higher ammonia nitrogen concentration (4.2 g/L) tolerates even concentration of volatile fatty acids (160 mmol/L) which causes inhibition of the process with low ammonia nitrogen concentration (0.2 g/L).

This paper describes anaerobic thermophilic sludge digestion (55 °C) in a continuously stirred tank reactor (CSTR) on a pilot-plant scale (150 L). The experimental protocol was defined to examine the effect of the increase in the organic loading rate on the efficiency of the digester and to report on its steady-state performance. The reactor was subjected to a programme of steady-state operation over a range of solids retention times (SRTs) of 75, 40, 27, 20 and 15 days and organic loading rates (OLR) in the range 0.4–2.2 kg VS/(m3 day). The digester was fed with raw sludge (containing approximately 35 kg/m3 volatile solids (VS)) once daily during the 75-day SRT period, twice daily during the 40-day SRT period and three times a day during the 27-, 20- and 15-day SRT periods. The reactor was initially operated with an organic loading rate of 0.4 kg VS/(m3 day) and an SRT of 75 days. The volatile solids removal efficiency in the reactor was found to be 73%, while the volumetric methane production rate produced in the digester reached 0.02 m3/(m3 day). Over a 338-day operating period, an OLR of 2.2 kg VS/(m3 day) was achieved with 49.1% VS removal efficiency in the pilot sludge digester, at which time the volumetric methane production rate content of biogas produced in the digester reached 0.4 m3/(m3 day). The chemical oxygen demand (COD) mass balance obtained indicated that COD used for methane generation increased when the SRT was decreased or when the influent organic loading rate was increased. This implies that the amount of COD used in the anabolism route decreased with SRT due the microbial population becoming adapted to new operational conditions and more COD being used to generate methane.

One of the major goals of engine designers is the reduction of fuel consumption and pollutant emissions while keeping or even improving engine performance. In recent years, different technical issues have been investigated and incorporated into internal combustion engines in order to fulfill these requirements. Most are related to the combustion process since it is responsible for both fuel consumption and pollutant emissions. Additionally, the most critical operating points for an engine are both the starting and the warming up periods (the time the engine takes to reach its nominal temperature, generally between 80°C and 90°C), since at these points fuel consumption and pollutant emissions are larger than at any other points. Thus, reducing the warm-up period can be crucial to fulfill new demands and regulations. This period depends strongly on the engine cooling system and the different strategies used to control and regulate coolant flow and temperature. In the present work, the influences of different engine cooling system configurations on the warm-up period of a Diesel engine are studied. The first part of the work focuses on the modeling of a baseline engine cooling system and the tests performed to adjust and validate the model. Once the model was validated, different modifications of the engine coolant system were simulated. From the modelled results, the most favourable condition was selected in order to check on the test bench the reduction achieved in engine warm-up time and to quantify the benefits obtained in terms of engine fuel consumption and pollutant emissions under the New European Driving Cycle (NEDC). The results show that one of the selected configurations reduced the warm-up period by approximately 159 s when compared with the baseline configuration. As a consequence, important reductions in fuel consumption and pollutant emissions (HC and CO) were obtained.

Access to reliable and affordable energy is vital for sustainable development. In the off-grid areas of developing countries, decentralized energy solutions have received increasing attention due to their contributions to reducing poverty. However, most of the rural population in many developing countries still has little or no access to modern energy technologies. This paper assesses the factors that determine the successes and failures of decentralized energy solutions based on local harmonized case studies from heterogeneous contexts from Asia, sub-Saharan Africa, and South America. The case studies were analyzed through the coupled lenses of energy transition and the Water–Energy–Food Security (WEF) Nexus. The findings indicate that access to modern decentralized energy solutions has not resulted in complete energy transitions due to various tradeoffs with the other domains of the WEF Nexus. On the other hand, the case studies point at the potential for improvements in food security, incomes, health, the empowerment of women, and resource conservation when synergies between decentralized energy solutions and other components of the WEF Nexus are present.