• Energy Research
• 13. Climate action close
• 3. Good health close
• ES close
• Energies close

This research presents a 100% renewable energy (RE) scenario by 2050 with a high share of electric vehicles on the grid (V2G) developed in Ecuador with the support of the EnergyPLAN analysis tool. Hour-by-hour data iterations were performed to determine solutions among various features, including energy storage, V2G connections that spanned the distribution system, and long-term evaluation. The high participation in V2G connections keeps the electrical system available; meanwhile, the high proportions of variable renewable energy are the pillar of the joint electrical system. The layout of the sustainable mobility scenario and the high V2G participation maintain the balance of the electrical system during most of the day, simplifying the storage equipment requirements. Consequently, the influence of V2G systems on storage is a significant result that must be considered in the energy transition that Ecuador is developing in the long term. The stored electricity will not only serve as storage for future grid use. Additionally, the V2G batteries serve as a buffer between generation from diversified renewable sources and the end-use stage.

Microbial electrochemical technologies (METs) constitute the core of a number of emerging technologies with a high potential for treating urban wastewater due to a fascinating reaction mechanism—the electron transfer between bacteria and electrodes to transform metabolism into electrical current. In the current work, we focus on the model electroactive microorganism Geobacter sulfurreducens to explore both the design of new start-up procedures and electrochemical operations. Our chemostat-grown plug and play cells, were able to reduce the start-up period by 20-fold while enhancing chemical oxygen demand (COD) removal by more than 6-fold during this period. Moreover, a filter-press based bioreactor was successfully tested for both acetate-supplemented synthetic wastewater and real urban wastewater. This proof-of-concept pre-pilot treatment included a microbial electrolysis cell (MEC) followed in time by a microbial fuel cell (MFC) to finally generate electrical current of ca. 20 A·m−2 with a power of 10 W·m−2 while removing 42 g COD day−1·m−2. The effective removal of acetate suggests a potential use of this modular technology for treating acetogenic wastewater where Geobacter sulfurreducens outcompetes other organisms.

In this study, our aim was to explore the potential energy savings obtainable from the recycling of 1 tonne of Construction and Demolition Waste (C&DW) generated in the Metropolitan City of Naples. The main fraction composing the functional unit are mixed C&DW, soil and stones, concrete, iron, steel and aluminium. The results evidence that the recycling option for the C&DW is better than landfilling as well as that the production of recycled aggregates is environmentally sustainable since the induced energy and environmental impacts are lower than the avoided energy and environmental impacts in the life cycle of recycled aggregates. This LCA study shows that the transition to the Circular Economy offers many opportunities for improving the energy and environmental performances of the construction sector in the life cycle of construction materials by means of internal recycling strategies (recycling C&DW into recycled aggregates, recycled steel, iron and aluminum) as well as external recycling by using input of other sectors (agri-food by-products) for the manufacturing of construction materials. In this way, the C&D sector also contributes to realizing the energy and bioeconomy transition by disentangling itself from fossil fuel dependence.

In recent years, solar price drops and regulations have helped residential users to invest in grid-connected photovoltaic (PV) facilities. In Spain, a novel law promotes self-consumption by discounting electricity fed into the grid from the utility bill. However, the performance of PV-based facilities depends on diverse factors. The contribution of this paper is to evaluate the techno-economic performance of such installations for different considerations linked to the Spanish law. A simulation model is used to examine different representative cities, load profiles and alternative objectives: maximising profitability and self-sufficiency. For profit maximisation, results show that load profile variations entail PV size changes up to 5 kWp for the same location, together with huge economic and self-sufficiency differences. In contrast, the solar radiation and compensation rate have a more limited influence. For self-sufficiency maximisation, the economic performance drops close to EUR 0, as benefits are used to double the PV size, buy batteries and reach close to 70% self-sufficiency. Finally, a sensitivity analysis shows a limited impact of the utility tariff and the technology cost on the PV size, but a relevant influence on the benefits. These results can help investors and families to quantify the risks and benefits of domestic self-consumption facilities.

Biodiesel is gaining more and more importance due to environmental issues. This way, alternative and sustainable crops as new biofuel sources are demanded. Safflower could be a sustainable raw material for biodiesel production, showing one disadvantage (as many biodiesels from vegetable oils), that is, a short oxidative stability. Consequently, the use of antioxidants to increase this parameter is mandatory. The aim of this research work was to assess the effect of two antioxidants (butylated hydroxyanisole, BHA, and tert-butylhydroquinone, TBHQ) on the oxidative stability of safflower biodiesel, which was characterized paying attention to its fatty acid methyl ester profile. For oxidative stability, the Rancimat method was used, whereas for fatty acid profile gas chromatography was selected. For the remaining parameters, the methods were followed according to the UNE-EN 14214 standard. The overall conclusion was that safflower biodiesel could comply with the standard, thanks to the use of antioxidants, with TBHQ being more effective than BHA. On the other hand, the combined use of these antioxidants did not show, especially at low concentrations, a synergic or additive effect, which makes the mixture of these antioxidants unsuitable to improve the oxidative stability.

This paper presents an economic assessment of three drying systems (DS) with different configurations: diesel-powered (DDS), grid-powered (GDS), and photovoltaic-powered (PVDS). The third configuration, PVDS, presents important technological innovations regarding the electric configuration (stand-alone PV, without batteries or grid support) and the heat pump technology used (optimized for drying the recirculated air, which permits a reduction in the electricity consumption by more than 45% if compared to a diesel air-heater or an electric resistance). The profitability of the investment required for the installation of the three systems is proven by calculating the profitability index (PI), the internal rate of return (IRR), the payback period (PBP), and the levelized cost of energy (LCOE). All the indicators show good profitabilities for the three technologies (the PI values range from 6.78 to 10.11, the IRR values range from 24% to 37%, and the PBPs are between 3 and 4 years), but the PVDS clearly offers important economic advantages: its PI and IRR are more than 40% higher, the PBP is 25% shorter, and the LCOE is between 40 and 47% lower than for the two other systems. The results of this analysis correspond to a particular base case but are obviously sensitive to geopolitical and economic changes: the ultimate strength of the PVDS configuration is its resilience against a possible rise in electricity and diesel prices, reducing the uncertainty for investors and policymakers.

Variable refrigerant flow (VRF) systems are one possible tool to meet the objective that all new buildings must be nearly zero-energy buildings by 31 December 2020. Building Information Modelling (BIM) is a methodology that centralizes building construction project information in a digital model promoting collaboration between all its agents. The objectives of this work were to develop a more precise model of the VRF system than the one available in EnergyPlus version 8.9 (US Department of Energy) and to study the operation of this system in an office building under different climates by implementing the building energy simulation in an Open BIM workflow. The percentage deviation between the estimation of the VRF energy consumption with the standard and the new model was 6.91% and 1.59% for cooling and heating respectively in the case of Barcelona and 3.27% and 0.97% respectively in the case of Madrid. The energy performance class of the analysed building was A for each climatic zone. The primary energy consumption of the office building equipped with the VRF system was of 65.8 kWh/(m2·y) for the Mediterranean climate of Barcelona and 72.4 kWh/(m2·y) for the Continental climate of Madrid.