• Energy Research
• Closed Access close
• Restricted close
• 6. Clean water close
• DE close
• EU close

Bioplastics are alternatives of conventional petroleum-based plastics. Bioplastics are polymers processed from renewable sources and are biodegradable. This study aims at conducting an environmental impact assessment of the bioprocessing of agricultural wastes into bioplastics compared to petro-plastics using an LCA approach. Bioplastics were produced from potato peels in laboratory. In a biochemical reaction under heating, starch was extracted from peels and glycerin, vinegar and water were added with a range of different ratios, which resulted in producing different samples of bio-based plastics. Nevertheless, the environmental impact of the bioplastics production process was evaluated and compared to petro-plastics. A life cycle analysis of bioplastics produced in laboratory and petro-plastics was conducted. The results are presented in the form of global warming potential, and other environmental impacts including acidification potential, eutrophication potential, freshwater ecotoxicity potential, human toxicity potential, and ozone layer depletion of producing bioplastics are compared to petro-plastics. The results show that the greenhouse gases (GHG) emissions, through the different experiments to produce bioplastics, range between 0.354 and 0.623 kg CO2 eq. per kg bioplastic compared to 2.37 kg CO2 eq. per kg polypropylene as a petro-plastic. The results also showed that there are no significant potential effects for the bioplastics produced from potato peels on different environmental impacts in comparison with poly-β-hydroxybutyric acid and polypropylene. Thus, the bioplastics produced from agricultural wastes can be manufactured in industrial scale to reduce the dependence on petroleum-based plastics. This in turn will mitigate GHG emissions and reduce the negative environmental impacts on climate change.

SummaryThe German government has adopted a law that requires sewage plants to go beyond the recovery of phosphorus from wastewater and to promote recycling. We argue that there is no physical global short‐ or mid‐term phosphorus scarcity. However, we also argue that there are legitimate reasons for policies such as those of Germany, including: precaution as a way to ensure future generations’ long‐term supply security, promotion of technologies for closed‐loop economics in a promising stage of technology development, and decrease in the current supply risk with a new resource pool.

Abstract A small reverse osmoisis (RO) plant supplied by a photovoltaic (PV) power supply has been installed at the island of Gran Canaria. On behalf of this system the feasibility of small PV-RO systems (1 m3/d) is investigated. The RO-plant is described in detail concerning its technical specifications, its operation constraints and its energy demand. Furthermore the photovoltaic power supply is described in detail. With simulations it is shown how the system is designed to guarantee a reliability of more than 96% in the water supply. A brief economic analysis shows that the water production costs are still high (about 16 $/m3) but can be lowered in future.

Abstract Continuous bio-methanization of an energy crop, namely the beet silage, was investigated in this laboratory-scale work as mono-substrate, using a mesophilic biogas digester controlled by a fuzzy logic control (FLC) technique and without using any supplementing or buffering agent, despite the low pH of the substrate around 3.80. The temperature, pH, redox potential (ORP), daily biogas production and composition of digester biogas were continuously measured online. During the operation, the hydraulic retention time (HRT) varied between 24.8 and 9 days, as the organic loading rate (OLR) ranged from 2.6 to 4.7 g L −1 d −1 . The average pH, specific gas production rate (spec. GPR) and volumetric gas production rate (vol. GPR) were determined to be 7.12, 0.31 L g VS −1 d −1 and 1.084 L L −1 d −1 , respectively. The average methane (CH 4 ) content of digester biogas was about 56%. The FLC technique, which was developed at HAW Hamburg for anaerobic conversion of acidic energy crops to methane, determined the daily feeding volume (∼ OLR/HRT) for the biogas digester, depending on the feedback from online pH and methane measurements, and on the calculation of the spec. GPR. The spec. GPR was calculated by the corrected daily biogas production. Through online monitoring of pH, biogas production rate and composition, and by use of the FLC technique, the acidic beet silage could continuously be converted to biogas, without using manure or any other kind of buffering or supplementing agent(s). The lab-scale anaerobic biogas digester performed stable and safe, without encountering any problems of instability, as indicated by an adequate amount of buffering capacity, a VFA content below 0.5 g L −1 and a neutral pH range throughout the study.

Abstract Water management has a major impact in the solid polymer fuel cell on overall system power, cost and efficiency. Single cell and stack performance may be adversely affected by the formation of liquid water, the dilution of reactant gases by water vapour, or by the dehydration of the solid polymer membrane. Peak fuel cell power is achieved typically at current densities at which performance is limited by mass transport. Improved water management at higher current densities not only increases peak power and efficiency but changes the profile of the power curve resulting in improved stability near the peak power operating point. Fuel cell water management can be accomplished by a number of approaches which include system design, stack operating conditions, stack hardware and membrane electrode assembly design. A number of these techniques have been successfully applied to both single cells and stacks. However, the options available for water management have to be assessed from an overall engineered system point of view.

Abstract To ensure techno-economically suitable installation of ground source heat pump (GSHP) systems, thermal and hydrogeological properties of the subsoil need to be investigated. In this paper, the geothermal potential for three types of GSHP installations in the urban area of Wuhan city is assessed based on preliminary geological investigations. The potential for shallow geothermal energy is evaluated for surface water heat pump systems (SWHP), groundwater heat pump systems (GWHP) and ground coupled heat exchanger heat pump systems (GCHP). The mapped shallow geothermal potentials provide essential information for the installation of GSHPs and for the management of geothermal resources of Wuhan city. Furthermore, the heat transfer rates for some typical configured borehole heat exchanger (BHE) are tested by field Thermal Response Tests (TRT). In order to understand the techno-economic feasibility of the GSHPs, different types of the installed systems are measured and analyzed.

The aim of the study presented was to implement a process model to simulate the dynamic behaviour of a pilot-scale process for anaerobic two-stage digestion of sewage sludge. The model implemented was initiated to support experimental investigations of the anaerobic two-stage digestion process. The model concept implemented in the simulation software package MATLAB/Simulink is a derivative of the IWA Anaerobic Digestion Model No.1 (ADM1) that has been developed by the IWA task group for mathematical modelling of anaerobic processes. In the present study the original model concept has been adapted and applied to replicate a two-stage digestion process. Testing procedures, including balance checks and 'benchmarking' tests were carried out to verify the accuracy of the implementation. These combined measures ensured a faultless model implementation without numerical inconsistencies. Parameters for both, the thermophilic and the mesophilic process stage, have been estimated successfully using data from lab-scale experiments described in literature. Due to the high number of parameters in the structured model, it was necessary to develop a customised procedure that limited the range of parameters to be estimated. The accuracy of the optimised parameter sets has been assessed against experimental data from pilot-scale experiments. Under these conditions, the model predicted reasonably well the dynamic behaviour of a two-stage digestion process in pilot scale.

Rapid population growth invokes the need for a vast amount of water conservation. Many centralized water treatment systems will reach their limits and face difficulties to provide clean industrial water to rural areas. The infrastructure for water distribution is dilapidated in many regions and only little of the wastewater is currently being recycled. One solution could be the expansion of decentralized membrane bioreactor (MBR) systems in peri-urban areas. MBR achieves excellent water qualities, whereas the comparatively high energy consumption is the main drawback. Therefore, MBR plants need to be optimized in their specific energy consumption to obtain a high degree of self-sufficiency for decentralized locations. There is a dire need for innovative controlling strategies and efficient coupling with energy supply systems through novel applications. This chapter will highlight the basic approaches to reduce the MBR's overall energy consumption and ways to establish sustainable, autonomous operations without sacrificing the process quality.

AbstractThis study aimed to identify drought‐mediated differences in amino nitrogen (N) composition and content of xylem and phloem in trees having different symbiotic N2‐fixing bacteria. Under controlled water availability, 1‐year‐old seedlings ofRobinia pseudoacacia(nodules withRhizobium),Hippophae rhamnoides(symbiosis withFrankia) andBuddleja alternifolia(no such root symbiosis) were exposed to control, medium drought and severe drought, corresponding soil water content of 70–75%, 45–50% and 30–35% of field capacity, respectively. Composition and content of amino compounds in xylem sap and phloem exudates were analysed as a measure of N nutrition. Drought strongly reduced biomass accumulation in all species, but amino N content in xylem and phloem remained unaffected only inR. pseudoacacia. InH. rhamnoidesandB. alternifolia, amino N in phloem remained constant, but increased in xylem of both species in response to drought. There were differences in composition of amino compounds in xylem and phloem of the three species in response to drought. Proline concentrations in long‐distance transport pathways of all three species were very low, below the limit of detection in phloem ofH. rhamnoidesand in phloem and xylem ofB. alternifolia. Apparently, drought‐mediated changes in N composition were much more connected with species‐specific changes in C:N ratios. Irrespective of soil water content, the two species with root symbioses did not show similar features for the different types of symbiosis, neither in N composition nor in N content. There was no immediate correlation between symbiotic N fixation and drought‐mediated changes in amino N in the transport pathways.

Abstract In the work reported here, baker’s yeast ( Saccharomyces cerevisiae ) was used as feed for the production of liquid biofuels in a continuous one-step process under hydrothermal conditions in the presence of excess hydrogen and K 2 CO 3 . The yeast conversion experiments were performed in an up-flow reactor under near-critical water conditions ( T 330–450 °C, p 20–32 MPa). The products consisted of three phases, an oil-like organic phase, a gaseous phase, and an aqueous phase. Higher concentrations of organic carbon in the process resulted in a higher product yield. The heating value of the organic phase was up to 38.6 MJ/kg. Liquefaction of yeast without any addition of K 2 CO 3 also resulted in liquid oil, but the quality and the yield of the oil product were lower. A reaction temperature of 400 °C was found to be optimal for the oil yield and quality.