• Energy Research
• 7. Clean energy close
• DE close
• ES close
• AU close
• EU close

Abstract The upward energy demand, along with the depletion of conventional energy sources, demands improved utilization of renewable energy resources. Among all renewable energy resources, solar energy is the most appropriate alternative to conventional energy sources owing to its inexhaustibility and green property. Solar collectors are devices that convert solar radiation into heat or energy. However, the efficiency of the solar collector is still not adequate. The competent step to enhance the efficiency of the solar collector is to use nanofluids. This study is carried out different phases viz. characterization and stabilization while both qualitative and quantitative methods used to evaluate the stability of nanofluids thermophysical properties of Al2O3 and CNC nanofluids such as thermal conductivity measured at four different temperature using KD2 Pro, viscosity and specific heat determined at similar temperature range by viscometer and differential scanning calorimetry respectively. The experiment is executed with a fixed flow rate and in steady-state conditions under extensive solar radiation. The experimental study has revealed that up to 2.48% and 8.46% efficiency of solar collector enhanced by using 0.5% Al2O3 and 0.5% CNC nanofluids respectively. Moreover, nanofluids show good to moderate stability performance. Besides, the thermal conductivity of nanofluids increased while viscosity is in a decreasing trend with increasing temperature. Nanofluids could enhance the efficiency of a flat-plate solar collector.

AbstractA common control strategy for the production of recombinant proteins in Pichia pastoris using the alcohol oxidase 1 (AOX1) promotor is to separate the bioprocess into two main phases: biomass generation on glycerol and protein production via methanol induction. This study reports the establishment of a soft sensor for the prediction of biomass concentration that adapts automatically to these distinct phases. A hybrid approach combining mechanistic (carbon balance) and data‐driven modeling (multiple linear regression) is used for this purpose. The model parameters are dynamically adapted according to the current process phase using a multilevel phase detection algorithm. This algorithm is based on the online data of CO2 in the off‐gas (absolute value and first derivative) and cumulative base feed. The evaluation of the model resulted in a mean relative prediction error of 5.52% and R² of .96 for the entire process. The resulting model was implemented as a soft sensor for the online monitoring of the P. pastoris bioprocess. The soft sensor can be used for quality control and as input to process control systems, for example, for methanol control.

AbstractSmart Grids are electrical grids that require a decentralised way of controlling electric power conditioning and thereby control the production and distribution of energy. Yet, the integration of Distributed Renewable Energy Sources (DRESs) in the Smart Grid introduces new challenges with regards to electrical grid balancing and storing of electrical energy, as well as additional monetary costs. Furthermore, the future smart grid also has to take over the provision of Ancillary Services (ASs). In this paper, a distributed ICT infrastructure to solve such challenges, specifically related to ASs in future Smart Grids, is described. The proposed infrastructure is developed on the basis of the Smart Grid Architecture Model (SGAM) framework, which is defined by the European Commission in Smart Grid Mandate M/490. A testbed that provides a flexible, secure, and low-cost version of this architecture, illustrating the separation of systems and responsibilities, and supporting both emulated DRESs and real hardware has been developed. The resulting system supports the integration of a variety of DRESs with a secure two-way communication channel between the monitoring and controlling components. It assists in the analysis of various inter-operabilities and in the verification of eventual system designs. To validate the system design, the mapping of the proposed architecture to the testbed is presented. Further work will help improve the architecture in two directions; first, by investigating specific-purpose use cases, instantiated using this more generic framework; and second, by investigating the effects a realistic number and variety of connected devices within different grid configurations has on the testbed infrastructure.

Abstract The need to increase energy system flexibility, alongside the need to lower fossil fuel use in the food sector, and the importance of refrigeration infrastructure presents an opportunity for Liquid Air Energy Storage (LAES) integrated with refrigerated warehouses. To quantify this opportunity in Europe we analyse energy scenarios and existing refrigeration infrastructure for four countries with diverse energy systems (UK, Spain, Bulgaria and Germany). We find that with growing levels of electricity generation from variable renewable sources and numerous refrigerated warehouses, LAES has the potential to provide value in many areas of the EU through the 2020s. However, LAES is still pre-commercial, and with the proportion of electricity from variable renewable sources still low in many countries it is likely that LAES will not be deployed widely alongside refrigerated warehouses under current market conditions. Countries such as the UK and Spain, which have the greatest need for additional energy system flexibility and the most refrigerated warehouses are likely to gain the most value initially.

Computational fluid dynamics (CFD) studies are carried out on a two-bladed vertical axis wind turbine operating at a wind speed of 8 m/s for tip speed ratios (λ) of 0.50–3.0. The blade is the NACA0021 airfoil with chord length 0.265 m and rotor radius 1 m. Basic sensitivity studies for various time step sizes are carried out. The results are validated against available measurement data from the literature. Excellent agreement is obtained for small λ up to optimum condition. For the higher tip speed ratios, the two-dimensional CFD computations predict higher results than the wind tunnel experiment, but they are very similar to the field measurement data. Wake characteristics are presented, showing that the wake becomes Gaussian at 5 times radius downstream of the rotor. It is shown that complex flow phenomena occur owing to dynamic stall onset, especially for the smaller tip speed ratio.

Co-generation of energy derived from human movement is not new. Intentionally accumulating energy, from mass urban-mobility, provides opportunities to re-purpose power. However, when mass-mobility is predictable, yet not harnessed, this highlights critical gaps in application of interdisciplinary knowledge. This research highlights a novel application of geostatistical modelling for the built environment with the purpose of understanding where energy harvesting infrastructure should be located. The work presented argues that advanced Geostatistical methods can be implemented as an appropriate method to predict probability distribution, density, clustering of populations and mass-population mobility patterns from large-scale online distributed and heterogeneous data sets published by the Australian Urban Research Infrastructure Network. Where clear urban spatio-behavioural relationships of density and movement can be predicted – understanding such patterns supports cross-disciplinary city planning and decision-making. A data-informed – predictive spatial decision-making framework is proposed – facilitating the endeavour of cogenerating kinetic human energy within a prescribed space. This novel proposition could further sustainability strategies for compact living for cities such as in Perth, Western Australia which is increasingly economically and geographically pressured to densify. This research argues that surveillance data elucidate a capacity to interpret and understand impacts of densification strategies, efficacy of CCTV networks in existing and emerging cities.

The global increase in energy demand and exponential exhaustion of fossil recourses has favored the development of new systems of electricity production. Photovoltaic solar energy is undoubtedly one that has the highest application in housings, due to its simplicity and easy implementation. In this work, a new prototype of photovoltaic solar tracker with Arduino platform was developed. Feedback control system that allows carrying out solar tracking with two axes using a stepper motor and linear actuator was established through an electronic circuit based on photodiodes. Moreover, real construction of the prototype was carried out, where the effectiveness of the design and its capacity to draw a maximum benefit of an incident radiation can be observed, placing the panel perpendicularly to the received energy and improving its performance for its application in future installations in housings. Results obtained from the comparison between the developed prototype and a static panel oriented according to the latitude of the area, show about 18% energy gain.