• Energy Research
• 2016-2025close
• Closed Access close
• Restricted close
• ES close
• EU close

Herewith we present the extended 1Hz dataset of wind measurements from a Skipheia meteorological station on the island of Frøya on the western coast of Norway, Trondelag. The data binned in 10 min averages can be find at: https://doi.org/10.5281/zenodo.2557500 The site represents an exposed coastal wind climate with open sea, land and mixed fetch from various directions. UTM-coordinates of the Met-mast: 8.34251 E and 63.66638 N. See the map for details (NorwegianMapping Authority): https://www.norgeskart.no/#!?project=norgeskart&layers=1003&zoom=3&lat=7035885.49&lon=539601.41&markerLat=7077031.483032227&markerLon=170902.83203125&panel=searchOptionsPanel&sok=Titranveien Presented data were gathered between years 2009-2016. Data&hardware summary: Years 2009-2016: Mast2 equipped with 6 pairs of 2D sonic anemometers at 10, 16, 25, 40, 70, 100 m above the ground, independent temperature measurements at the same heights and near the ground; pressure and relative humidity from local meteostation (Sula, 20 km away). Years 2014-2016: Mast4 equipped with 2 pairs of 2D sonic anemometers at 40 and 100 m above the ground. The distance between the masts is 79 m. Data is binned in years and months and stored in a ‘*.txt’ tab-separated values file. Data column order is described in SkipheiaMast2_header.txt and SkipheiaMast4_header.txt, where WSx is the wind speed (m/s), WDx is the wind direction (360 deg), ATx is the air temperature (deg C) and x designates the instrument number. The instruments are numbered starting from the ground. Example: For Mast2 (6 pairs of anemometers, ground temperature + 6 temperature sensors on the mast) that means that AT0 is the ground temperature. WS1 and WS2 are wind speed records at 10 m level. WS3 and WS4 are wind speed records at 16 m. For Mast4 (2 pairs of anemometers) that means that WS1 and WS2 are wind speed records at 40 m level. WS3 and WS4 are wind speed records at 100 m. Detailed site description with wind climate description can be found in attached analysis: Site analysys.pdf. Additional information and analysis can be found in listed below works, using data from Frøya site: Bardal, L. M., & Sætran, L. R. (2016, September). Spatial correlation of atmospheric wind at scales relevant for large scale wind turbines. In Journal of Physics: Conference Series (Vol. 753, No. 3, p. 032033). IOP Publishing, doi:10.1088/1742-6596/753/3/032033, https://iopscience.iop.org/article/10.1088/1742-6596/753/3/032033/pdf Bardal, L. M., & Sætran, L. R. (2016). Wind gust factors in a coastal wind climate. Energy Procedia, 94, 417-424, https://doi.org/10.1016/j.egypro.2016.09.207 IEA Wind TCP Task 27 Compendium of IEA Wind TCP Task 27 Case Studies, Technical Report, Prepared by Ignacio Cruz Cruz, CIEMAT, Spain Trudy Forsyth, WAT, United States, October 2018; Chapter 1.8. https://community.ieawind.org/HigherLogic/System/DownloadDocumentFile.ashx?DocumentFileKey=8afc06ec-bb68-0be8-8481-6622e9e95ae7&forceDialog=0 Domagalski, P., Bardal, L. M., & Sætran, L. Vertical Wind Profiles in Non-neutral Conditions-Comparison of Models and Measurements from Froya. Journal of Offshore Mechanics and Arctic Engineering, doi: 10.1115/1.4041816, http://offshoremechanics.asmedigitalcollection.asme.org/article.aspx?articleid=2711333&resultClick=3 Møller, M., Domagalski, P., & Sætran, L. R. (2019, October). Characteristics of abnormal vertical wind profiles at a coastal site. In Journal of Physics: Conference Series (Vol. 1356, No. 1, p. 012030). IOP Publishing. https://iopscience.iop.org/article/10.1088/1742-6596/1356/1/012030 Møller, M., Domagalski, P., and Sætran, L. R.: Comparing Abnormalities in Onshore and Offshore Vertical Wind Profiles, Wind Energ. Sci. Discuss., https://doi.org/10.5194/wes-2019-40 , in review, 2019.

Abstract AP1000® Generation III+ reactor bases its safety concept on passive systems, differently from the previous Generation II reactors. This fact has led the approximations and methodologies previously used for modeling active safety systems to be reviewed and adapted to simulate the physics of passive systems. Diverse studies about the AP1000 containment have demonstrated the difficulty to correctly model the occurring phenomenology. In this paper, an integral AP1000 3D containment GOTHIC model is presented, including the Passive Containment Cooling System (PCCS). The model includes the compartments inside and outside the metallic containment liner that influence the thermal–hydraulic behavior. The model is tested against a Large Break Loss of Coolant Accident (LBLOCA) to assess its thermal–hydraulic performance, assuming a PCS tank malfunction, what is a conservative hypothesis. The pressure and temperature evolution predicted by the 3D containment model is analyzed and compared with a single node Lumped Parameters model, allowing to evaluate some preliminary benefits of 3D modeling for containment safety analysis. The 3D containment model allows to predict the thermal evolution in each containment compartment capturing the heterogeneity of this phenomenon, with higher resolution than the lumped parameters models traditionally used in this kind of analyses. It allows to observe the thermohydraulic conditions locally at any time during the transient.

This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 723649 Indoor environmental quality (IEQ) measurement and survey data of demonstration buildings in the hybridGEOTABS project

AbstractThe co‐occurrence of chronic pain and alcohol use disorders (AUDs) involves complex interactions between genetic and neurophysiological aspects, and the research has reported mixed findings when they both co‐occur. There is also an indication of a gender‐dependent effect; males are more likely to use alcohol to cope with chronic pain problems than females. Recently, a new conceptualization has emerged, proposing that the negative affective component of pain drives and maintains alcohol‐related behaviors. We studied in a longitudinal fashion alterations in alcohol drinking patterns and pain thresholds in a mouse model of chronic neuropathic pain in a sex‐dependent manner. Following partial denervation (spared nerve injury [SNI]), stimulus‐evoked pain responses were measured before chronic alcohol consumption, during drinking, during a deprivation phase, and following an episode of excessive drinking. During the course of alcohol drinking, we observed pronounced sex differences in pain thresholds. Male mice showed a strong increase in pain thresholds, suggesting an analgesic effect induced by alcohol over time, an effect that was not observed in female mice. SNI mice did not differ from sham‐operated controls in baseline alcohol consumption. However, following a deprivation phase and the reintroduction of ethanol, male SNI mice but not female mice showed more pronounced excessive drinking than controls. Finally, we observed decreased central ethanol sensitivity in male SNI mice but not in females. Together with our finding, that ethanol is able to decrease a pain‐induced negative affective memory we come to following conclusion. We propose that a lower sensitivity to the intoxicating effects of alcohol together with the ability of alcohol to reduce the negative affective component of pain may explain the higher co‐occurrence of AUD in male chronic pain patients.

This scenario set of consistent national and global low-carbon development pathways, developed as part of the CD-LINKS project, takes current national policies and the Nationally Determined Contributions (NDCs) as an entry point for short-term climate action, then transitioning to the long-term temperature goals of 1.5 and 2°C as defined by the Paris Agreement. The scenarios explore the complex interplay between climate action and development, while simultaneously taking both global and national perspectives and thereby informing the design of complementary climate-development policies. The CD-LINKS consortium brought together national and global integrated assessment modeling teams from Europe, China, India, Brazil, Russia, Japan and the USA as well as domain experts in the areas of human development, climate adaptation, economics, energy geopolitics, atmospheric chemistry, human health, land use, agriculture, and water. The data is available for download at the CD-LINKS Scenario Explorer. The license permits use of the scenario ensemble for scientific research and science communication, but restricts redistribution of substantial parts of the data. Please refer to the FAQ and legal code for more information.

Abstract The combined production of electricity, heat and cold by a polygeneration system connected to a district heating and cooling network can provide high energy utilization efficiency. The inherent complexity of simultaneous production of different services and the high variability in the energy demand make combined cooling and heating systems performance highly dependent on the operational strategy. In this paper, an operational optimization method based on the moving average of real-time measurements of energy demands and ambient conditions is proposed. Real energy demand data from a district heating and cooling network close to Barcelona, Spain, are used to test the method. A complex polygeneration system is considered, consisting of an internal combustion engine, a double-effect absorption chiller, an electric chiller, a boiler and a cooling tower. A detailed modelling of the system is provided, considering partial load behavior of the components and ambient conditions effects. Results of the real-time optimal management are discussed and compared to traditional operational strategies and to the ideal optimal management achievable with perfectly accurate forecast of energy demands. Moreover, the optimal width of the window adopted for the moving average of real-time data is identified.

Abstract In this paper we propose a time-dependent, three-dimensional model for the efficiency of a nanofluid-based direct-absorption parabolic trough solar collector under a turbulent flow regime. The model consists of a system of equations: a partial differential equation for conservation of energy, and a time-dependent radiative transport equation describing the propagation of solar radiation through the nanofluid. Writing the model in dimensionless form reveals four controlling dimensionless numbers: one describing the relative importance of conduction and advection and three describing the heat loss to the surroundings. Realistic parameter values are applied to reduce the model further and these indicate that two of the dimensionless groups have a much smaller impact on the performance of the solar collector. We use the resulting solution for the temperature to calculate an analytic expression for the collector’s efficiency. This expression permits optimisation of design parameters such as particle loading, incoming radiative intensity, receiver dimensions, the inlet temperature, and solar concentration ratio.