• Energy Research
• Open Access close
• Restricted close
• Embargo close
• 7. Clean energy close
• 11. Sustainability close
• EU close
• NL close

Data set with reference scenarios. As it is not possible to include the entire dataset in this report, we only include two Tables on final energy demand. Table 1 shows the Final Energy Demand projections per industrial subsector and EU28 country in the Reference Scenario and Table 2 the Final Energy Demand projections per industrial subsector and EU28 country in the Frozen Efficiency Scenario. The full dataset, including physical production (in ktonnes) and fuel and electricity demand (in TJ) per industrial sub-sector, per fuel type and per EU 28 country is available upon request to the project coordinator.

Survey of Timisoara City residents conducted by the West University of Timisoara for the SMARTEES project between March and August 2020 (n=439). The survey was aimed at (1) understanding individual behaviours related to the environment and energy in general, and (2) assessing how people make decisions about energy efficiency measures in particular (i.e., perceptions about existing regional or national programmes aiming to improve the energy efficiency of homes through upgrades to the building fabric with a neighbourhood-scale heat network retrofit). It includes data about citizens' attitudes, behaviours and social networks. Files include the dataset in two formats: .csv and .sav. The questionnaire, a data dictionary and background and sampling details are also included.

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.AerChemMIP.HAMMOZ-Consortium.MPI-ESM-1-2-HAM' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MPI-ESM1.2-HAM climate model, released in 2017, includes the following components: aerosol: HAM2.3, atmos: ECHAM6.3 (spectral T63; 192 x 96 longitude/latitude; 47 levels; top level 0.01 hPa), atmosChem: sulfur chemistry (unnamed), land: JSBACH 3.20, ocean: MPIOM1.63 (bipolar GR1.5, approximately 1.5deg; 256 x 220 longitude/latitude; 40 levels; top grid cell 0-12 m), ocnBgchem: HAMOCC6, seaIce: unnamed (thermodynamic (Semtner zero-layer) dynamic (Hibler 79) sea ice model). The model was run by the ETH Zurich, Switzerland; Max Planck Institut fur Meteorologie, Germany; Forschungszentrum Julich, Germany; University of Oxford, UK; Finnish Meteorological Institute, Finland; Leibniz Institute for Tropospheric Research, Germany; Center for Climate Systems Modeling (C2SM) at ETH Zurich, Switzerland (HAMMOZ-Consortium) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, ocean: 250 km, ocnBgchem: 250 km, seaIce: 250 km.

Dataset supporting publication: “A novel ROM methodology to support the estimation of the energy savings under the Measurement and Verification protocol” (publication available for download: GEOFIT Zenodo) Datasets resultant from simulation of the integrated system into buildings. Conference paper presented in IBPSA-England Building Simulation and Optimisation Conference 2020 This paper presents a novel Reduced Order grey box Model (ROM) methodology, based on a Resistor-Capacitor (RC) network, which supports the creation of the baseline energy consumption and the estimation of energy savings due to Energy Conservation Measures (ECMs) under the Measurement and Verification protocol. Within this scope, a description of the RC network, including a calculation of the parameters’ needed to execute the ROM, are presented. This ROM methodology is demonstrated on an educational building located in Sant Cugat, Spain as part of the H2020 GEOFIT project. The results presented in this paper demonstrate that the ROM is sufficiently accurate for the creation of the baseline energy consumption and for estimating the energy savings of different ECMs.

This dataset was prepared by TNO as a contribution to the H2020 project CHE and the H2020 project VERIFY. The basis is a high-resolution (~1x1 km) emission inventory providing CO2 and CO (from fossil fuels and biofuels separately) over western Europe (2ºW - 19ºE, 47ºN - 56ºN). The reported emissions by European countries to UNFCCC (CO2) and to EMEP/CEIP (CO) have been used and where needed gap-filled or replaced with emission data from the GAINS model. These country-level emissions are disaggregated in space using a consistent spatial distribution methodology, whereas large point sources are listed with their exact locations. This approach is similar to the one described by Kuenen et al., (ACP, 2014). Emissions are reported per GNFR sector, with an extra split for road transport. The emission grids that are part of this dataset are a variation on the base grid, representing the uncertainty in the emission data. Each grid is equally plausible. The grids have been created using a Monte Carlo approach. The uncertainties in the underlying data used to create the base grid (emissions: activity data and emission factors, spatial proxies) have been collected (either from country reports or based on expert judgement). Through the Monte Carlo simulation these uncertainties, taking into account error correlations between some sub-sectors, are combined to create ten new emission grids. The spread in emissions between these emission maps gives an indication of the uncertainty in the emissions. The grid files (in .csv and .nc format) contain annual total emissions per grid cell for the year 2015. A separate file has been prepared for each ensemble member in the Monte Carlo simulation (indicated with M). The unit in the files is kg/yr. A detailed description of the Monte Carlo simulation is presented in: Super, I., Dellaert, S. N. C., Visschedijk, A. J. H., and Denier van der Gon, H. A. C.: Uncertainty analysis of a European high-resolution emission inventory of CO2 and CO to support inverse modelling and network design, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2019-696, in review, 2019. N.B. It is important to note that 10 maps are not sufficient to describe the sometimes complex uncertainty structures, for example in the case of lognormal uncertainty distributions. The interpretation of the uncertainty based on these 10 maps should therefore be done with care. NB. Despite efforts to prevent negative emissions to occur in the grid maps, some negative values are still present. In local studies this might cause some issues, and we recommend to set negative emissions to zero in those cases.

Three data files are provided for Case Study 1 in the openENTRANCE project: Full_potential.V9.csv, metaData.Full_Potential.csv, and acheivable_NUTS2_summary.csv. The data covers 10 residential devices on the NUTS2 level for the EU27 + UK +TR + NO + CH from 2020-2050. The devices included are storage heater, water heater with storage capabilitites, air conditiong, heat circulation pump, air-to-air heat pump, refreigeration (includes refrigerators and freezers), dish washer, washing machine, and tumble drier. Full_potential.V9.csv shows the NUTS2 level unadjusted loads for residential storage heater, water heater, air conditiong, circulation pump, air-to-air heat pump, refreigeration (includes refrigerators and freezers), dish washer, washing machine, and tumble drier using representative hours from 2020-2050. The loads provided here have not been adjusted with the direct load participation rates (see paper for more details). More details on the dataset can be found in the metaData.Full_Potential.csv file. The acheivable_NUTS2_summary.csv shows the NUTS2 level acheivable direct load control potentials for the average hour in the respective year (years - 2020, 2022,2030,2040, 2050).

This repository consists of two databases- CASE-ONSHORE and CASE-OFFSHORE, generated using OpenFAST v2.4 on NREL's 10-MW reference wind turbine for training data-driven probabilistic load surrogate models. The data is to be used for mapping 10-minute average environmental conditions to the corresponding 10-minute load statistics such as load average, fatigue and range at various locations on the tower and blades.

The repository contains the underlining data for "On the wake deflection of vertical axis wind turbines by pitched blades" This repository consists of experimental (PIV and force measurements) data in the wake of VAWTs with different blade pitch angles. The measured cases include an isolated VAWT with -10, 0, 10 degree pitch, respectively. Author contribution: Ming Huang: Conceptualization; Methodology; Validation; Experimental design; Carrying out the experiment; postprocessing Yugandhar Vijaykumar Patil: Design assistant; Carrying out the experiment; postprocessing Andrea Sciacchitano: Conceptualization; Experimental design; Methodology; Validation; Delphine De Tavernier: Conceptualization Carlos Simao Ferreira: Conceptualization; Methodology; Validation; Experimental design