• Energy Research
• engineering and technology close
• 2. Zero hunger close
• ES close
• EU close
• PL close

Abstract The impact of CO 2 leakage from underground storage formations on shallow water resources is a concerning aspect in CO 2 capture and storage (CCS) risk assessment. In Campo de Calatrava region (Spain), natural CO 2 fluxes from the Earth’s mantle interact with shallow aquifers, resulting in significant changes in their physical and chemical properties. The resultant water is slightly acidic (pH 5.9-6.4), oxidizing, and enriched in iron (up to 6.1×10 -4 mol·L -1 ) and other metals usually found at trace concentrations. Thermodynamic calculations reveal that aqueous Fe(III) carbonate complexes play an important role in the persistence of this high concentration of iron and trace metals in solution.

High nutrient discharge from groundwater (GW) into surface water (SW) have multiple undesirable effects on river water quality. With the aim to estimate the impact of anthropic pressures and river–aquifer interactions on nitrate status in SW, this study integrates two hydrological simulation and water quality models. PATRICAL models SW–GW interactions and RREA models streamflow changes due to human activity. The models were applied to the Júcar River Basin District (RBD), where 33% of the aquifers have a concentration above 50 mg NO3−/L. As a result, there is a direct linear correlation between the nitrate concentration in rivers and aquifers (Júcar r2 = 0.9, and Turia r2 = 0.8), since in these Mediterranean basins, the main amount of river flows comes from groundwater discharge. The concentration of nitrates in rivers and GW tends to increase downstream of the district, where artificial surfaces and agriculture are concentrated. The total NO3− load to Júcar RBD rivers was estimated at 10,202 tN/year (239 kg/km2/year), from which 99% is generated by diffuse pollution, and 3378 tN/year (79 kg/km2/year) is discharged into the Mediterranean Sea. Changes in nitrate concentration in the RBD rivers are strongly related to the source of irrigation water, river–aquifer interactions, and flow regulation. The models used in this paper allow the identification of pollution sources, the forecasting of nitrate concentration in surface and groundwater, and the evaluation of the efficiency of measures to prevent water degradation, among other applications.

This work has been developed under the AGROinLOG Project, “Demonstration of innovative integrated biomass logistics centres for the Agro-industry sector in Europe”. An Integrated Biomass Logistics Center (IBLC), is based on the introduction of new production chains into existing agro-industries by using new biomass feedstock. The AGROinLOG Project has dedicated great attention to investigate the potential of cereal chaff as a valuable resource.Chaff is the fine fraction of the thrashing residues, not usually collected. Chaff is made up of glumes, seed husks, rachis and the tinner part of the cereal stems, whole and cracked kernels, as well as weed seeds.Currently there are several mechanical solutions available on the market for chaff recovery, and others are still at prototype stage, but theyare not so common and very often unknown to the farmers.So far, the literature reportsfew cases of chaff collection with the specific purpose of weed seeds removal, but it still lacks specificexperiments on these machinesintentionally used for biomass collection.For this reason, during the Project AGROinLOG a series of large field tests were performed using an independent scientific approach with different kind of chaff harvesting technologiesin France, Sweden and Italy from 2017 to 2019.The present study collects the results of these activities with the aim to fill that gap and provide deeper understanding in the possibility to enhance the current cereal harvesting method, in order to improve the quantity of biomass collected by including the chaff. Proceedings of the 29th European Biomass Conference and Exhibition, 26-29 April 2021, Online, pp. 62-68

Access to reliable and affordable energy is vital for sustainable development. In the off-grid areas of developing countries, decentralized energy solutions have received increasing attention due to their contributions to reducing poverty. However, most of the rural population in many developing countries still has little or no access to modern energy technologies. This paper assesses the factors that determine the successes and failures of decentralized energy solutions based on local harmonized case studies from heterogeneous contexts from Asia, sub-Saharan Africa, and South America. The case studies were analyzed through the coupled lenses of energy transition and the Water–Energy–Food Security (WEF) Nexus. The findings indicate that access to modern decentralized energy solutions has not resulted in complete energy transitions due to various tradeoffs with the other domains of the WEF Nexus. On the other hand, the case studies point at the potential for improvements in food security, incomes, health, the empowerment of women, and resource conservation when synergies between decentralized energy solutions and other components of the WEF Nexus are present.

La primera biorrefinación con lignina del álamo nórdico para producir fibras de celulosa podría desplazar la producción de algodón en tierras agrícolas Al cruzar Populus trichocarpa 3 P. trichocarpa de una población distante, se obtuvieron álamos híbridos que pueden crecer rápidamente en tierras marginales en climas del norte. Estos híbridos pueden transformarse mediante fraccionamiento catalítico reductor para producir una fibra textil deslignificada que puede ser un sustituto del algodón, así como un biocombustible alimentado con lignina en el rango de gasolina-aviación-diesel. La sostenibilidad de esta cadena de valor fue evaluada por LCA y mostró beneficios sustanciales en términos de uso de agua en comparación con la producción de algodón. Le bioraffinage en lignine du peuplier nordique pour produire des fibres de cellulose pourrait déplacer la production de coton sur les terres agricoles En croisant Populus trichocarpa 3 P. trichocarpa d'une population éloignée, des peupliers hybrides ont été obtenus qui peuvent croître rapidement sur des terres marginales dans les climats nordiques. Ces hybrides peuvent être transformés par fractionnement catalytique réducteur pour donner une fibre textile délignifiée qui peut remplacer le coton ainsi qu'un biocarburant ligninérisé dans la gamme essence-aviation-diesel. La durabilité de cette chaîne de valeur a été évaluée par LCA et a montré des avantages substantiels en termes d'utilisation de l'eau par rapport à la production de coton. Lignin-first biorefining of Nordic poplar to produce cellulose fibers could displace cotton production on agricultural lands By crossing Populus trichocarpa 3 P. trichocarpa from a distant population, hybrid poplar trees were obtained that can grow rapidly on marginal lands in northern climates.These hybrids can be transformed by reductive catalytic fractionation to yield a delignified textile fiber that can be a substitute for cotton as well as a ligninderived biofuel in the gasoline-aviation-diesel range.The sustainability of this value chain was evaluated by LCA and showed substantial benefits in terms of water use compared with cotton production. يمكن للتكرير الحيوي الأول لليجنين للحور الشمالي لإنتاج ألياف السليلوز أن يحل محل إنتاج القطن في الأراضي الزراعية من خلال عبور Populus trichocarpa 3 P. trichocarpa من مجموعة سكانية بعيدة، تم الحصول على أشجار الحور الهجينة التي يمكن أن تنمو بسرعة على الأراضي الهامشية في المناخات الشمالية. يمكن تحويل هذه الهجينة عن طريق التجزئة التحفيزية المختزلة لإنتاج ألياف نسيج منزوعة الكرامة يمكن أن تكون بديلاً عن القطن بالإضافة إلى وقود حيوي خفيف في نطاق البنزين والطيران والديزل. تم تقييم استدامة سلسلة القيمة هذه من قبل LCA وأظهرت فوائد كبيرة من حيث استخدام المياه مقارنة بإنتاج القطن.

The search for energy efficient construction solutions is still pending in the agro-food industry, in which a large amount of energy is often consumed unnecessarily when storing products. The main objective of this research is to promote high energy efficiency built environments, which aim to reduce energy consumption in this sector. We analyze the suitability of using the thermal inertia of the ground to provide an adequate environment for the storage and conservation of agro-food products. This research compares different construction solutions based on the use of ground thermal properties, analyzing their effectiveness to decrease annual outdoor variations and provide adequate indoor conditions. The analysis undertaken is based on over five million pieces of data, obtained from an uninterrupted four year monitoring process of various constructions with different levels of thermal mass, ranging from high volume constructions to others lacking this resource. It has been proven that constructive solutions based on the use of ground thermal inertia are more effective than other solutions when reducing the effects of outdoor conditions, even when these have air conditioning systems. It is possible to reach optimal conditions to preserve agro-food products such as wine, with a good design and an adequate amount of terrain, without having to use air conditioning systems. The results of this investigation could be of great use to the agro-food industry, becoming a reference when it comes to the design of energy efficient constructions.

This study is oriented to the economic and environmental impacts of the substitution in Kinshasa traditional cookstoves by improved clean cookstoves. We selected two traditional cookstoves (TCS), the TCS D27 and the TCS D23 and two improved cookstoves (ICS), the ICS 16/8/NC and the ICS 16/8/C. The test was carried out under the cooking controlled test (CCT) protocol, which is a laboratory test under strictly controlled conditions. All tests were carried out using the meal much preferred by the average and poor households of Kinshasa. To cook a dry meal of 1150g of beans and 1250g of rice, it takes 2429g of charcoal for a traditional cookstove TCS D27 and 1847g for traditional cookstove TCS D23. However, this only requires 1198g of charcoal for an improved cookstove ICS 16/8/NC and 1081g for an improved clean cookstove ICS 16/8/C. This represents fuel savings ranging from 37% to 55%. A household of 10 people in Kinshasa would spend up to $ 48.61 per month to purchase fuel with a TCS D27 while it will only need $ 22.01 per month for the same culinary tasks using an ICS 16/8/C. Le présent travail a consisté à analyser les impacts économiques et environnementaux du changement d’utilisation dans les ménages de la ville Kinshasa en République démocratique du Congo (RD Congo) du foyer de cuisson traditionnel par un foyer de cuisson amélioré. Nous avons sélectionnés deux foyers de cuisson traditionnels (traditional cookstove TCS), le TCS D27 et le TCS D23 et deux foyers de cuisson améliorés (improved cookstove ICS), le ICS 16/8/NC et le ICS 16/8/C. Le test réalisé fut le test de cuisson contrôlée (cooking controlled test CCT), qui est un test de laboratoire dans des conditions strictement contrôlées. Tous les tests furent réalisés en cuisinant un mets local familier populaire, principalement apprécié par les ménages moyens et pauvres de Kinshasa. Pour cuire un repas sec de 1150 g de haricot et 1250 g de riz, il a fallu 2429 g de charbon de bois avec un foyer traditionnel TCS D27 et 1847,4 g avec un foyer traditionnel TCS D23. Mais cela exigeait seulement 1198,7 g de charbon de bois avec un ICS 16/8/NC ou 1081,1 g avec un ICS 16/8/C,ce qui représente des économies en combustible allant de 37% jusqu’à 55%. Ainsi un ménage de 10 personnes à Kinshasa dépenserait jusqu’à 48,61 $/mois pour l’achat en combustible avec l’usage d’un TCS D27 alors qu’il n’aura besoin que de 22,01 $ mensuels pour les mêmes tâches culinaires en utilisant un ICS 16/8/C.

In this work, we developed a new method to assess the impact of climate change (CC) scenarios on land subsidence related to groundwater level depletion in detrital aquifers. The main goal of this work was to propose a parsimonious approach that could be applied for any case study. We also evaluated the methodology in a case study, the Vega de Granada aquifer (southern Spain). Historical subsidence rates were estimated using remote sensing techniques (differential interferometric synthetic aperture radar, DInSAR). Local CC scenarios were generated by applying a bias correction approach. An equifeasible ensemble of the generated projections from different climatic models was also proposed. A simple water balance approach was applied to assess CC impacts on lumped global drawdowns due to future potential rainfall recharge and pumping. CC impacts were propagated to drawdowns within piezometers by applying the global delta change observed with the lumped assessment. Regression models were employed to estimate the impacts of these drawdowns in terms of land subsidence, as well as to analyze the influence of the fine-grained material in the aquifer. The results showed that a more linear behavior was observed for the cases with lower percentage of fine-grained material. The mean increase of the maximum subsidence rates in the considered wells for the future horizon (2016–2045) and the Representative Concentration Pathway (RCP) scenario 8.5 was 54%. The main advantage of the proposed method is its applicability in cases with limited information. It is also appropriate for the study of wide areas to identify potential hot spots where more exhaustive analyses should be performed. The method will allow sustainable adaptation strategies in vulnerable areas during drought-critical periods to be assessed.