• Energy Research
• Restricted close
• Embargo close
• NL close
• US close
• EU close

The aeroelastic behavior of a flexible plate subjected to a uniform axial flow is investigated in the presence of a rigid plane set parallel to the plate. It is shown that the ground effect reduces the flutter inflow velocity and strengthens the possibility of using the flag for extracting energy from winds and currents. The numerical analysis is carried out assuming that both the unsteady potential incompressible flow and the plate can be described with 2D models, i.e., a lumped vortex panel method and a nonlinear Euler-Bernoulli beam model, respectively, without losing the essential features of the fluid-structure interaction. Asymmetry of post-critical behavior (limit-cycle oscillations) and sensitivity of the results to the main flag parameters (distance from the ground, mass ratio and damping) are also considered, including also the energy distribution over the identified proper orthogonal modes. The investigated reduction of the flutter velocity in ground effect has been also confirmed with experimental tests relative to a polypropylene flag with and without the rigid panel mimicking the presence of the ground.

The drought prone North-West Bangladesh is vulnerable to the impacts of climate change, particularly because of less water availability in the dry period and high water requirement for crop production. Improved understanding of recent changes in crop water demand in the dry season is important for the water resources management in the region. A study was carried out to determine the potential impacts of recent climate change during last three decades on trends of water requirements of Boro rice. The reference crop evapotranspiration (ETo), potential crop water requirement (∑ETC), effective rainfall during the crop growing period (ER), potential irrigation requirement for crop evapotranspiration (∑ETC − ER) and net irrigation requirement of Boro rice were estimated using observed daily climate data in the CropWat model for the period of 1980 to 2013 for four North-West districts. Significant decreasing trends of ETo were observed in most of the dry months due to increasing relative humidity and decreasing wind-speed and sun-shine hours. The results showed decreasing trends of potential crop water requirement, i.e. the total crop evapotranspiration (∑ETC), of Boro rice due to decreasing reference crop evapotranspiration and shorter crop growing periods. The variations in trends of potential irrigation requirement for crop evapotranspiration (∑ETC − ER) found among different districts, are mainly linked to variations in trends of changes in effective rainfall. The net irrigation requirement of Boro rice has decreased, by 11% during the last three decades at an average rate of −4.4 mm year−1, instead of decreasing effective rainfall, mainly because of high rate of decrease of crop evapotranspiration (−5.9 mm year−1). Results indicate that a warming climate does not always result in higher agricultural water use and that climate change can also result in reduced water demands because of changes in humidity, wind-speed and sun-shine hours.

Clean combustion technologies, based on reactant dilution, have shown very peculiar and innovative characteristics. Reduction of light and noise emission and uniformity of temperature and composition distribution inside the combustion chamber, related to an extension of the reaction zone, make these processes very promising in several technological fields. Analysis of combustion in very diluted conditions is needed for a general understanding of these processes, which remain unknown from many aspects. The study is also useful for the identification of practical constraints which define the most suitable reactor configurations and working parameters for process reliability. The present work deals with a theoretical analysis of methane oxidation in diluted conditions using one of the detailed kinetic schemes available in the literature. A well-stirred reactor (WSR) configuration has been considered as a first attempt of process schematization. This choice is consistent with the experimental characterization of the flameless combustion processes. The influence of residence time, C/O ratio, and inlet temperature on the steady state was studied for an oxygen molar fraction (0.05), chosen as representative of flameless combustion processes. It has been pointed out that only rich conditions (C/O ? 0.25) are possible for WSR creation, because they allow partial methane conversion. Three kinetic regimes, related to different temperature ranges, have been identified on the basis of product distribution analysis. Both the oxidation and pyrolitic regimes, occurring respectively in low- and high-temperature ranges, are the most interesting working conditions for diluted combustion. The former, leading to CO and H2O as main reaction products, is suitable for reburning technology. The latter, which corresponds to large production of CO and H2, has been shown to be a reasonable explanation of flameless combustion. Advantages and potentials of this innovative process are analyzed, taking into account the kinetic pathway followed in the different working conditions.

With the concept of climate services rapidly climbing research and research-funding agendas worldwide, the time is ripe for a debate about the objectives, scope and content of such services.

The transition to a low carbon future is starting to affect landscapes around the world. In order for this landscape transformation to be sustainable, renewable energy technologies should not cause critical trade-offs between the provision of energy and that of other ecosystem services such as food production. This literature review advances the body of knowledge on sustainable energy transition with special focus on ecosystem services-based approaches and methods. Two key issues emerge from this review: only one sixth of the published applications on the relation between renewable energy and landscape make use of the ecosystem service framework. Secondly, the applications that do address ecosystem services for landscape planning and design lack efficient methods and spatial reference systems that accommodate both cultural and regulating ecosystem services. Future research efforts should be directed to further advancing the spatial reference systems, the use of participatory mapping and landscape visualizations tools for cultural ecosystem services and the elaboration of landscape design principles.

This paper compares the quantity and quality of solid waste obtained from traditional ponds and recirculating aquaculture systems (RAS) for striped catfish and evaluates methane and compost production from these wastes. Striped catfish sludge was collected from four commercial ponds along the Mekong river and from three indoor RAS. The amount of sludge dry matter produced per kilogram of fish in ponds was 6 times higher than that in RAS. However, the concentration of nutrients in solid waste from RAS was much higher, with better compost quality and higher methane yield than that of sludge from ponds. Out of the collected 381 L biogas, the methane yield of striped catfish's solid waste in RAS systems was 201 L per kg chemical oxygen demand (COD). In ponds, the collected 267 L biogas yielded 125 L CH4 per kg COD. The higher methane production from RAS sludge concurred with higher digestibility of COD: 58% for RAS versus 38% for ponds. The quality and quantity of methane from striped catfish sludge were lower than that for other animal manures, and the resulting electricity yield was low. Considering the higher nutrient concentration in RAS-sludge, we recommend the combination RAS and composting in reusing sludge, which is presently the best option for a more sustainable and cleaner striped catfish production system.

Several dairy farms in the Netherlands aim at reducing their environmental impact by improving the internal nutrient cycle (INC) at farm level. Practices to improve nutrient cycling at these INC farms, however, might not only reduce the environmental impact on-farm, but alter also the off-farm environmental impact associated with supply chain processes (production and transport) related to inputs entering the farm, such as purchased feed or fertilizer or the economic or societal performance of these farms. We compared, therefore, a set of sustainability indicators of nine INC farms with a group of benchmark farms, comparable in terms of farm size, intensity and site-specific circumstances. This benchmark group was composed using statistical matching to exclude the effect of these characteristics on economic, environmental and societal performance. Economic indicators used were: farm income per unpaid annual working unit and the costs to revenues ratio. Environmental indicators used were derived from a cradle-to-farm-gate life cycle assessment: land occupation (LO), non-renewable energy use (NREU), global warming potential (GWP), acidification potential (AP) and eutrophication potential (EP), expressed per kg fat-and-protein-corrected milk (FPCM). In addition, we quantified the soil content of organic carbon and phosphorus, and the soil nitrogen supply. Societal indicators used were: payments for agri-environmental measures, grazing hours and penalties for aberrant milk composition. Results showed that INC farms had a lower non-renewable energy use per kg FPCM, higher soil organic carbon content and received higher annual payments for agri-environmental measures, whereas economic and other environmental, societal indicators did not differed. Furthermore, we demonstrated the need for a sound benchmark to assess the effect of INC-farming on the economic, environmental and societal performance. Statistical matching enabled us to define, for each INC farm, a benchmark group with similar farm characteristics, which are known to affect sustainability indicators. Observed differences in sustainability indicators between both farm groups, therefore, truly resulted from aiming at internal nutrient cycling, and not from differences in other farm characteristics.

Abstract We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note.