• Energy Research
• Restricted close
• Open Source close
• Embargo close
• engineering and technology close
• EU close

Abstract A Gas–Solid Vortex Reactor (GSVR), in literature also referred to as Rotating Fluidized Bed in Static Geometry (RFB-SG), is a promising reactor type for Process Intensification (PI) with respect to reactor volume reduction. Although replacing gravitational by centrifugal force has been considered since the seventies, the hydrodynamics of the reactor flow and the bed behavior remain largely unknown. In the present work experiments have been carried out in a cold flow GSVR with diameter of 0.54 m, length of 0.1 m and 36 inlet slots of 2 mm. Gas injection velocities of 55–111 m/s and particles with densities of 950–1800 kg/m 3 and diameters of 1–2 mm have been applied. Depending on solids density, particle diameter and gas injection velocity the bed behavior can be considered as stable, semi-stable or unstable. For semi-stable and stable flow regimes the effect of the above process conditions on the maximum solids capacity was investigated. With increasing solids density, the bed stability considerably decreases, while the maximum solids capacity increases. By increasing the gas injection velocity, both the bed stability and the maximum solids capacity increase. Once bed stability is accomplished, a further increase of the gas injection velocity does not affect the maximum solids capacity. With increasing particle diameter, the bed stability decreases while the maximum solids capacity increases.

Coherence in Photosynthesis It is unclear how energy absorbed by pigments in antenna proteins is transferred to the central site of chemical catalysis during photosynthesis. Hildner et al. (p. 1448 ) observed coherence—prolonged persistence of a quantum mechanical phase relationship—at the single-molecule level in light-harvesting complexes from purple bacteria. The results bolster conclusions from past ensemble measurements that coherence plays a pivotal role in photosynthetic energy transfer. Hayes et al. (p. 1431 , published online 18 April) examined a series of small molecules comprised of bridged chromophores that also manifest prolonged coherence.

Shallow Geothermal Systems (SGS) are widely used to provide low-cost heating and cooling of residential and commercial buildings. SGS can be an economically-viable solution even for commercial buildings, where controlled temperature is fundamental for the production processes. To assess the thermal resistance of the soil and the performance of a SGS, Thermal Response Tests (TRT) must be performed. TRT machines are today designed mainly for short term monitoring, for relatively deep SGS (up to 200 m) and for being used by expert operators. Lightweight, low-cost machines for both fast and long term, reliable and unattended TRT for very Shallow Geothermal Systems (vSGS) are not available today. This paper describes the design of a micro-TRT machine (mTRT) for vSGS, which is gaining interest in the civil engineering, environmental, energy and food chain sectors. The paper describes the features of the wireless monitoring system, the design choices to achieve the required accuracy and the software developed for adding remote control capability. Experimental validation in a real test field demonstrates the quality of measurements collected for analysing the TRT data.

Nordhaus (1973) has in his seminal contribution addressed two emerging questions in the field of energy economics. First, how do current market prices of natural resources reflect true scarcity fro...

Abstract Water transport control is the major issue of direct methanol fuel cell. High water flow rates through the fuel cell imply extra water feeding at the anode and flooding at the cathode. In the present work, water transport and flooding in the direct methanol fuel cell are investigated through both experimental and modeling analyses and an interpretation of such phenomena is proposed. The model is validated on the experimental data of two different fuel cells in an extensive range of operating conditions. The analysis elucidates that water transport through the cathode diffusion layer is determined by vapor diffusion, slightly affected by current density, and by liquid water permeation proportional to current density, that occurs when liquid pressure in the electrode exceeds a threshold value. To simulate the effects of cathode diffusion layer flooding two mechanisms must be considered simultaneously: superficial pore obstruction, proportional to liquid water concentration in cathode channel, and bulk pore obstruction, proportional to liquid water permeation. The modeling analysis proposes the correlations to reproduce the effects of cathode flooding and permits to discuss the onset and magnitude of such phenomenon and the influence of micro-porous layer.

Abstract Simulation and optimization techniques are the pillars of for the Virtual Commissioning of modern digital factories. In particular, industrial production lines are complex systems formed by a set of machines that have several cross-dependencies (i. e., the production efficiency of a machine impact deeply performance figures of the others and affects the whole line productivity). The simulation and optimization of production lines is an integrated approach that allows finding efficiently optimized production parameters. This paper presents an example of application of the simulation to the virtual design and optimization of an industrial production line.

In this study we evaluate the skill of a new, merged soil moisture product (ECV_SM) that has been developed in the framework of the European Space Agency's Water Cycle Multi-mission Observation Strategy and Climate Change Initiative projects. The product combines in a synergistic way the soil moisture retrievals from four passive (SMMR, SSM/I, TMI, and AMSR-E) and two active (ERS AMI and ASCAT) coarse resolution microwave sensors into a global data set spanning the period 1979-2010. The evaluation uses ground-based soil moisture observations of 596 sites from 28 historical and active monitoring networks worldwide. Besides providing conventional measures of agreement, we use the triple collocation technique to assess random errors in the data set. The average Spearman correlation coefficient between ECV_SM and all in-situ observations is 0.46 for the absolute values and 0.36 for the soil moisture anomalies, but differences between networks and time periods are very large. Unbiased root-mean-square differences and triple collocation errors show less variation between networks, with average values around 0.05 and 0.04m3m-3, respectively. The ECV_SM quality shows an upward trend over time, but a consistent decrease of all performance metrics is observed for the period 2007-2010. Comparing the skill of the merged product with the skill of the individual input products shows that the merged product has a similar or better performance than the individual input products, except with regard to the ASCAT product, compared to which the performance of ECV_SM is inferior. The cause of the latter is most likely a combination of the mismatch in sampling time between the satellite observations and in-situ measurements, and the resampling and scaling strategy used to integrate the ASCAT product into ECV_SM on the other. The results of this study will be used to further improve the scaling and merging algorithms for future product updates.

Artículos en revistas A new multistage and stochastic mathematical model of an integrated distribution system planning problem is described in Part I. The efficiency and validity of this model are tested by carrying out a case study on a standard IEEE 41-bus radial distribution system. The numerical results show that the simultaneous integration of energy storage systems (ESSs) and reactive power sources largely enables a substantially increased penetration of variable generation (wind and solar) in the system, and consequently, reduces overall system costs and network losses. For the system, a combined wind and solar PV power of up to nearly three times the base-case peak load is installed over a three-year planning horizon. In addition, the proposed planning approach also considerably defers network expansion and/or reinforcement needs. Generally, it is clearly demonstrated in an innovative way that the joint planning of distributed generation, reactive power sources, and ESSs, brings significant improvements to the system such as reduction of losses, electricity cost, and emissions as a result of increased renewable energy sources (RESs) penetration. Besides, the proposed modeling framework considerably improves the voltage profile in the system, which is crucial for a normal operation of the system as a whole. Finally, the novel planning model proposed can be considered as a major leap forward toward developing controllable grids, which support large-scale integration of RESs info:eu-repo/semantics/publishedVersion