• Energy Research
• 7. Clean energy close
• AU close
• FI close
• University of Leeds close

Comprehensive and reliable information on anthropogenic sources of greenhouse gas emissions is required to track progress towards keeping warming well below 2°C as agreed upon in the Paris Agreement. Here we provide a dataset on anthropogenic GHG emissions 1970-2019 with a broad country and sector coverage. We build the dataset from recent releases from the “Emissions Database for Global Atmospheric Research” (EDGAR) for CO2 emissions from fossil fuel combustion and industry (FFI), CH4 emissions, N2O emissions, and fluorinated gases and use a well-established fast-track method to extend this dataset from 2018 to 2019. We complement this with information on net CO2 emissions from land use, land-use change and forestry (LULUCF) from three available bookkeeping models.

Abstract. Reliable quantification of the sources and sinks of greenhouse gases, together with trends and uncertainties, is essential to monitoring the progress in mitigating anthropogenic emissions under the Paris Agreement. This study provides a consolidated synthesis of CH4 and N2O emissions with consistently derived state-of-the-art bottom-up (BU) and top-down (TD) data sources for the European Union and UK (EU27+UK). We integrate recent emission inventory data, ecosystem process-based model results, and inverse modelling estimates over the period 1990–2018. BU and TD products are compared with European National GHG Inventories (NGHGI) reported to the UN climate convention secretariat UNFCCC in 2019. For uncertainties, we used for NGHGI the standard deviation obtained by varying parameters of inventory calculations, reported by the Member States following the IPCC guidelines recommendations. For atmospheric inversion models (TD) or other inventory datasets (BU), we defined uncertainties from the spread between different model estimates or model specific uncertainties when reported. In comparing NGHGI with other approaches, a key source of bias is the activities included, e.g. anthropogenic versus anthropogenic plus natural fluxes. In inversions, the separation between anthropogenic and natural emissions is sensitive to the geospatial prior distribution of emissions. Over the 2011–2015 period, which is the common denominator of data availability between all sources, the anthropogenic BU approaches are directly comparable, reporting mean emissions of 20.8 Tg CH4 yr−1 (EDGAR v5.0) and 19.0 Tg CH4 yr−1 (GAINS), consistent with the NGHGI estimates of 18.9 ± 1.7 Tg CH4 yr−1. TD total inversions estimates give higher emission estimates, as they also include natural emissions. Over the same period regional TD inversions with higher resolution atmospheric transport models give a mean emission of 28.8 Tg CH4 yr−1. Coarser resolution global TD inversions are consistent with regional TD inversions, for global inversions with GOSAT satellite data (23.3 Tg CH4yr−1) and surface network (24.4 Tg CH4 yr−1). The magnitude of natural peatland emissions from the JSBACH-HIMMELI model, natural rivers and lakes emissions and geological sources together account for the gap between NGHGI and inversions and account for 5.2 Tg CH4 yr−1. For N2O emissions, over the 2011–2015 period, both BU approaches (EDGAR v5.0 and GAINS) give a mean value of anthropogenic emissions of 0.8 and 0.9 Tg N2O yr−1 respectively, agreeing with the NGHGI data (0.9 ± 0.6 Tg N2O yr−1). Over the same period, the average of the three total TD global and regional inversions was 1.3 ± 0.4 and 1.3 ± 0.1 Tg N2O yr−1 respectively, compared to 0.9 Tg N2O yr−1 from the BU data. The TU and BU comparison method defined in this study can be operationalized for future yearly updates for the calculation of CH4 and N2O budgets both at EU+UK scale and at national scale. The referenced datasets related to figures are visualized at https://doi.org/10.5281/zenodo.4288969 (Petrescu et al., 2020).

Project: GCOS Earth Heat Inventory - A study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory (EHI), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period from 1960 to present. Summary: The file “GCOS_EHI_1960-2020_Earth_Heat_Inventory_Ocean_Heat_Content_data.nc” contains a consistent long-term Earth system heat inventory over the period 1960-2020. Human-induced atmospheric composition changes cause a radiative imbalance at the top-of-atmosphere which is driving global warming. Understanding the heat gain of the Earth system from this accumulated heat – and particularly how much and where the heat is distributed in the Earth system - is fundamental to understanding how this affects warming oceans, atmosphere and land, rising temperatures and sea level, and loss of grounded and floating ice, which are fundamental concerns for society. This dataset is based on a study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory published in von Schuckmann et al. (2020), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period 1960-2020. The dataset also contains estimates for global ocean heat content over 1960-2020 for different depth layers, i.e., 0-300m, 0-700m, 700-2000m, 0-2000m, 2000-bottom, which are described in von Schuckmann et al. (2022). This version includes an update of heat storage of global ocean heat content, where one additional product (Li et al., 2022) had been included to the initial estimate. The Earth heat inventory had been updated accordingly, considering also the update for continental heat content (Cuesta-Valero et al., 2023).

Global mitigation pathways play a critical role in informing climate policies and targets that are in line with international climate goals. However, it is not possible to directly compare modelled results with national inventories used to assess progress under the UNFCCC due to differences in how land-based fluxes are accounted for.National inventories consider carbon flux on managed land using an area-based approach with managed land-areas determined by nations. Emissions scenarios consider a different managed land area and are calibrated against data from detailed global carbon cycle models that account for natural (indirect) and anthropogenic (direct) fluxes separately by design. To disentangle the direct and indirect components of land-based carbon fluxes, we use a reduced complexity climate model with explicit treatment of the land-use sector, OSCAR, one of the models used by the Global Carbon Project. We find the discrepancy between model and NGHGI-based accounting methods globally to be 4.4 ± 1.0 Gt CO2 yr-1 averaged over the 2000-2020 time period, which is in line with existing estimates. We then apply OSCAR to the set of pathways assessed by the IPCC to quantify how this gap evolves over time and estimate how key mitigation benchmarks change.Across both 1.5°C and 2°C scenarios, LULUCF emissions pathways aligned with NGHGI accounting practices show a strong increase in the total land sink until around mid-century. However, the ‘NGHGI alignment gap’  decreases over this period, converging in the 2050-2060s for 1.5°C scenarios and 2070s-2080s for 2°C scenarios. The convergence is primarily a result of the simulated stabilization and then decrease of the CO2-fertilization effect as well as background climate warming reducing the overall effectiveness of the land sink, which in turn reduces the indirect removals considered by NGHGIs. These dynamics lead to land-based emissions reversing their downward trend in most NGHGI-aligned scenarios by mid-century, and result in the LULUCF sector becoming a net-source of emissions by 2100 in about 25% of both 1.5°C and 2°C scenarios.Assessing emission pathways using LULUCF definitions from national inventory accounting results in downward revisions to emissions benchmarks derived from scenarios. NGHGI-aligned pathways result in earlier net-zero CO2 emissions by around 2-5 years for both 1.5°C and 2°C scenarios, and 2030 emission reductions relative to 2020 are enhanced by about 5 percentage points for both pathway categories. When incorporating the additional land removals considered by NGHGIs, the assessed cumulative net CO2 emissions to global net-zero CO2 also decreases systematically by 15-18% for both 1.5°C and 2°C scenarios.We find that increasing removals from direct fluxes in 1.5C scenarios overtake estimated removals using NGHGI conventions in the near term. However, by midcentury, the strengthening of direct removals is balanced by weakening of indirect removals, meaning that, on average, carbon removal on land accounted for using NGHGI conventions in 1.5C scenarios results in about half of the LULUCF removals in current policy scenarios. We discuss the implications of our results for future Global Stocktakes and market mechanisms under the Paris Agreement.

Considerable effort has been put into developing sustainability assessment frameworks for biofuel production in developing countries. Nevertheless, their successful implementation remains problematic in sub-Saharan Africa. To address this challenge in this paper, through a thorough examination of academic and grey literature, repeatedly occurring sustainability aspects/issues were drawn from internationally recognised biofuel assessment frameworks. Theoretical framings that corresponded with the interlinking socio-environmental-economic qualities and issues for achieving sustainability through ethical implementation conformity (political ecology, development economics, social capital and institutional economics) were then used to inform development of a conceptual framework that could guide biofuel project implementation in sub-Saharan Africa to address complex sustainability issues. The supporting theories pursue sustainable development through, amongst others, an emphasis on the more equitable dispersal of costs and benefits through transparent networking in rural settings and the integration of contrasting viewpoints of diverse stakeholders in emerging economies.

Among recent developments in manufacturing industries, the laser-powder bed fusion process (L-PBF) is gaining attention for manufacturing complex and functional parts through the selective melting of powders. However, post-processing is required to improve further the quality of L-PBF parts which corresponds to machinability challenges. In this study, stainless steel grade SS 316L manufactured through L-PBF is subjected to high-speed turning to explore the influence of process variables. The cutting speed, CS (125 m/min, 175, and 225 m/min), depth of cut, DOC (0.45 and 0.90 mm), and feed rate, FR (0.225 and 0.337 mm/rev) are used for process analysis. Machining performance (surface roughness and tool life) and sustainability aspects (energy consumption, carbon emissions, economics) are taken as response metrics. Parametric optimization to achieve desired response characteristics is carried out. The optimized parametric levels achieved an 87.66% goal of lowering machining cost, 80.94% goal of minimizing carbon emissions, 99.25% goal of decreasing specific energy, 100% goal of enhancing tool life, and 98.95% goal of reducing surface roughness. The present research can be used as a basis for comparative analysis of sustainable machining routes (lubrication-based or production tooling) and as a fundamental guideline for machinists in the metal processing industry. This study was also supported by Ministry of Science and Innovation (MICINN) and the NextGenerationEU/PRTR Spain, through the project “Human-centred insight GENerator in ZERO defect manufacturing for waste reduction (iGENZERO)” grant TED2021-131921A-I00. Peer reviewed

Hydrothermal liquefaction (HTL) is a promising route for producing renewable fuels and chemicals from algal biomass. However, the protein fraction of the alga gives rise to nitrogen compounds in the oil fraction, which may render the oil unattractive for use in conventional refining processes. We report a two-stage HTL approach with the primary aim of reducing the nitrogen concentration in the bio-crude oil. A mild (b200 °C) pre-treatment step (Stage I) is performed before more severe (250–350 °C) HTL conditions (Stage II) are applied to the microalga Chlorella for the production of bio-crude in a batch reactor. The pre-treatment resulted in up to 50 wt.% of the input nitrogen crossing into the Stage I aqueous phase and, following Stage II processing, reductions in the bio-crude nitrogen contents of up to 55%, relative to the direct HTL of untreated Chlorella were observed. However, since considerable amounts of the starting material were lost in Stage I, overall lower quantities of bio-crude were isolated after Stage II processing, as compared to single-stage processing. Nitrogen extraction during Stage I is enhanced by the addition of acids (1 N sulphuric or formic acid) but the process remains unselective. Overall, it is concluded that the two-stage approach to reducing the nitrogen content of bio-crudes from a protein-rich alga requires careful evaluation of the trade-off between the desired bio-crude properties and the yield obtained.

AbstractScientifically rigorous guidance to policy makers on mitigation options for meeting the Paris Agreement long-term temperature goal requires an evaluation of long-term global-warming implications of greenhouse gas emissions pathways. Here we employ a uniform and transparent methodology to evaluate Paris Agreement compatibility of influential institutional emission scenarios from the grey literature, including those from Shell, BP, and the International Energy Agency. We compare a selection of these scenarios analysed with this methodology to the Integrated Assessment Model scenarios assessed by the Intergovernmental Panel on Climate Change. We harmonize emissions to a consistent base-year and account for all greenhouse gases and aerosol precursor emissions, ensuring a self-consistent comparison of climate variables. An evaluation of peak and end-of-century temperatures is made, with both being relevant to the Paris Agreement goal. Of the scenarios assessed, we find that only the IEA Net Zero 2050 scenario is aligned with the criteria for Paris Agreement consistency employed here. We investigate root causes for misalignment with these criteria based on the underlying energy system transformation.