• Energy Research
• 11. Sustainability close
• 3. Good health close
• 1. No poverty close
• FI close

The European Union is currently in the process of transformation toward a circular economy model in which different areas of activity should be integrated for more efficient management of raw materials and waste. The wastewater sector has a great potential in this regard and therefore is an important element of the transformation process to the circular economy model. The targets of the circular economy policy framework such as resource recovery are tightly connected with the wastewater treatment processes and sewage sludge management. With this in view, the present study aims to review existing indicators on resource recovery that can enable efficient monitoring of the sustainable and circular solutions implemented in the wastewater sector. Within the reviewed indicators, most of them were focused on technological aspects of resource recovery processes such as nutrient removal efficiency, sewage sludge processing methods and environmental aspects as the pollutant share in the sewage sludge or its ashes. Moreover, other wide-scope indicators such as the wastewater service coverage or the production of bio-based fertilizers and hydrochar within the wastewater sector were analyzed. The results were used for the development of recommendations for improving the resources recovery monitoring framework in the wastewater sector and a proposal of a circularity indicator for a wastewater treatment plant highlighting new challenges for further researches and wastewater professionals.

Abstract Energy costs in the wastewater industry are increasing due to increasing trends in electricity rates and more stringent requirements for effluent quality. Wastewater aeration process is typically the largest energy consumer of the treatment plant and the optimization of the aeration process can offer significant savings for the wastewater treatment plants (WWTPs). Utilization of dynamic models can offer optimization solutions for improving the energy efficiency and process performance. In this work a simplified modelling approach emphasizing the control valves and the blowers is tested by developing aeration system models for two Finnish WWTPs. The developed model requires calibration of only a single parameter and the results from the simulations showed that reasonable estimations of the aeration systems energy demand could be made with a limited knowledge on the details of the physical system. The promising results highlight the strong influence of the control valve positioning to the whole system and indicate that airflow distribution along the system could be estimated simply from the positioning of the valves. The presented modelling approach allows the comparison between different blower and control valve alternatives during operation and for the process upgrades and offers prospect for improving the aeration operation control strategies.

Salaspuro, M. P. & Kesaniemi, Y. A. Intravenous galactose elimination tests with and without ethanol loading in various clinical conditions. Scand. J. Gastroent. 1973, 8, 681-686.Intravenous galact...

Human energy harvesting is envisioned as a remedy to the weight, the size, and the poor energy density of primary batteries in medical implants. The first implant to have necessarily raised the idea of a biological power supply was the pacemaker in the early 1960s. So far, review articles on human energy harvesting have been rather unspecific and no tribute has been given to the early role of the pacemaker and the cardiovascular system in triggering research in the field. The purpose of the present article is to provide an up-to-date review of research efforts targeting the cardiovascular system as an alternative energy source for active medical implants. To this end, a chronological survey of the last 14 most influential publications is proposed. They include experimental and/or theoretical studies based on electromagnetic, piezoelectric, or electrostatic transducers harnessing various forms of energy, such as heart motion, pressure gradients, and blood flow. Technical feasibility does not imply clinical applicability: although most of the reported devices were shown to harvest an interesting amount of energy from a physiological environment, none of them were tested in vivo for a longer period of time.Human energy harvesting is envisioned as a remedy to the weight, the size, and the poor energy density of primary batteries in medical implants. The first implant to have necessarily raised the idea of a biological power supply was the pacemaker in the early 1960s. So far, review articles on human energy harvesting have been rather unspecific and no tribute has been given to the early role of the pacemaker and the cardiovascular system in triggering research in the field. The purpose of the present article is to provide an up-to-date review of research efforts targeting the cardiovascular system as an alternative energy source for active medical implants. To this end, a chronological survey of the last 14 most influential publications is proposed. They include experimental and/or theoretical studies based on electromagnetic, piezoelectric, or electrostatic transducers harnessing various forms of energy, such as heart motion, pressure gradients, and blood flow. Technical feasibility does not imply clinical applicability: although most of the reported devices were shown to harvest an interesting amount of energy from a physiological environment, none of them were tested in vivo for a longer period of time.

Diesel engines are challenged to reduce their emissions. Nitrogen oxides (NOx), hydrocarbons, particulate matter and carbon dioxide are most important regulated diesel emissions. The legislation is driving for the use of renewable fuels in vehicles but all the impacts of those on emission control technology are not clear yet. In this study the number and chemical composition of particles emitted from a non-road diesel engine with and without a selective catalytic reduction (SCR) unit were investigated. Common diesel fuel oil (DFO) and untreated rape seed oil (RSO) were used as fuels. The NOx reduction activity of the fresh SCR catalyst was also investigated. The results indicated that the fuel had a great impact on the particles emitted from the engine. The particle number was 10–100 times higher when RSO was used as fuel compared to DFO. The DFO particles contained carbon in significantly higher proportions compared to the RSO particles. Metals, such as Fe and Cu, were also found in the DFO particles. For both fuels the NOx reduction activity was 79% with a SCR converter. As a conclusion, the use of the SCR converter decreased the number of particles in general but increased the number of the nanoparticles.

The near real-time data and edge processing capabilities (EDPCs), such as AI and prediction capabilities at the edge of the networks, will offer emerging possibilities to develop digital solutions to assist in achieving Sustainable Development Goals (SDGs) in cities, city-districts, and buildings. These new solutions can improve situational-awareness and assist users in monitoring, controlling, planning, and decision-making tasks. There will be multiple owners or holders for EDPCs and the leverage of EDPCs in achieving SDGs requires that there are incentives and means to exchange these assets in urban environments. This paper focuses on the analysis carried out within the scope of data marketplaces and determines the requirements and research themes for enabling the exchange and trade of EDPCs in the future cities.

The outbreak of SARS-COV-2 disease 2019 (COVID-19) abruptly changed the patterns in electricity consumption, challenging the system operations of forecasting and balancing supply and demand. This is due to the mitigation measures that include lockdown and Work from Home (WFH), which decreased the aggregated demand and remarkably altered its profile. Here, we characterise these changes with various quantitative markers and compare it with pre-COVID-19 business-as-usual data using Great Britain (GB) as a case study. The ripple effects on the generation portfolio, system frequency, forecasting accuracy and imbalance pricing are also analysed. An energy data extraction and pre-processing pipeline that can be used in a variety of similar studies is also presented. Analysis of the GB demand data during the March 2020 lockdown indicates that a shift to WFH will result to a net benefit for flexible stakeholders, such as consumer on variable tariffs. Furthermore, the analysis illustrates a need for faster and more frequent balancing actions, as a result of the increased share of renewable energy in the generation mix. This new equilibrium of energy demand and supply will require a redesign of the existing balancing mechanisms as well as the longer-term power system planning strategies.

International environmental organizations have an increasing commitment to the development of conservation programs in high-diversity regions where indigenous communities maintain customary rights to their lands and seas. A major challenge that these programs face is the alignment of international conservation values with those of the indigenous communities whose cooperation and support are vital. International environmental organizations are focused on biodiversity conservation, but local communities often have a different range of concerns and interests, only some of which relate to biodiversity. One solution to this problem involves adoption of a cultural landscape approach as the ethical and organizational foundation of the conservation program. In our conservation work in coastal Melanesia, we have developed a cultural landscape approach that involves the construction of a conceptual model of environment that reflects the indigenous perceptions of landscape. This model incorporates cultural, ideational, and spiritual values alongside other ecosystem services and underpins the conservation activities, priorities, and organizational structure of our programs. This cultural landscape model was a reaction to a survey of environmental values conducted by our team in which Solomon Islanders reported far greater interest in conserving cultural heritage sites than any other ecosystem resources. This caused a radical rethinking of community-based conservation programs. The methodologies we adopted are derived from the fields of archaeology and historical anthropology, in which there is an established practice of working through research problems within the framework of indigenous concepts of, and relationship to, landscape. In our work in Isabel Province, Solomon Islands, coastal communities have enthusiastically adopted conservation programs that are based on cultural landscape models that recognize indigenous values. A particularly useful tool is the Cultural Heritage Module, which identifies cultural heritage sites that become targets of conservation management and that are used as part of a holistic framework for thinking about broader conservation values.