• Energy Research
• Open Access close
• Closed Access close
• Open Source close
• 12. Responsible consumption close
• FI close

Improvements in energy efficiency and production of renewable energy hold significant potential for reducing greenhouse gas emissions of housing, which accounts for 14% of global greenhouse gas emissions. In our research, we focused on the willingness of owners of detached houses to adopt renewable energy production systems of their own, and we examined perceived barriers to adopting these systems. The research was conducted using a survey and a life cycle assessment model. The survey covered three residential areas in Lahti, Finland, and the potential reductions in greenhouse gas emissions were estimated using a life cycle assessment model based on the survey results. The barriers to transformation were identified as a lack of knowledge in the following three areas: (1) the possible annual savings attained; (2) the costs of implementing energy efficiency and renewable energy production solutions; and (3) the technologies used in renewable energy production. The greenhouse gas emission reductions in the residential areas surveyed would amount to approximately 15% if the consumers implemented the solutions they considered.

In an idealised industrial ecosystem (IE), firms and organisations utilise each other's material and energy flows including wastes and by-products to reduce the system's virgin material and energy input as well as the waste and emission output from the system as a whole, and contribute to sustainable development (SD). IE complements the more conventional individual flow, product, process, organisation, individual actor or sector-focused environmental management approaches and tools with network or systems level approaches. The first research objective of this paper is to construct indicators for IE. The second task is to test the use of these indicators with "what if?" material and energy flow scenarios for the energy and waste system of Satakunta region in Finland including 28 municipalities. Using literature analysis as a source, we arrive at environmental indicators of carbon dioxide (CO2) equivalents, and at economic indicators of fuel, energy and waste management costs and revenues. The social indicators show the employment effects of the waste management system. The scenarios analyse the current situation (0-scenario) against alternative situations in the future. The future scenarios are developed according to the known and anticipated trends in international and national policy and legislation. The indicator application in the scenarios produces social, environmental and economic effects of waste management in four categories: direct negative, direct positive, indirect negative and indirect positive. Industrial ecosystem theory emphasises the utilisation of wastes as a resource with value alongside the objective of reducing waste. Therefore, the indirect positive effects of waste management are important, as well as the conventional focus of waste management, which has usually been on direct positive effects. The main difficulties in our argument are the system boundary definition, the qualitatively different nature of environmental, economic and social effects and indicators as well as the lack of qualitative or interview data on the preferences and interests of the actors involved.

District heating is a network of pipes through which heat is delivered from a centralised source. It is expected to play an important role in the decarbonisation of the energy sector in the coming years. In district heating, heat is traditionally generated through fossil fuels, often with combined heat and power (CHP) units. However, increasingly, waste heat is being used as a low carbon alternative, either directly or, for low temperature sources, via a heat pump. The design of district heating often has competing objectives: the need for inexpensive energy and meeting low carbon targets. In addition, the planning of district heating schemes is subject to multiple sources of uncertainty such as variability in heat demand and energy prices. This paper proposes a decision support tool to analyse and compare system designs for district heating under uncertainty using stochastic ordering (dominance). Contrary to traditional uncertainty metrics that provide statistical summaries and impose total ordering, stochastic ordering is a partial ordering and operates with full probability distributions. In our analysis, we apply the orderings in the mean and dispersion to the waste heat recovery problem in Brunswick, Germany.

Reduction of greenhouse gas emissions and mitigation of climate change are the main aims of the global climate policy. Increased use of renewable energy is a central measure in achieving these goals. However, mitigation of climate change through increased use of renewable energy also has negative environmental impacts. Focusing merely on greenhouse gas emissions may lead to overseeing these other negative environmental impacts and thereby in unwanted side-effects. The aim of this review was to assess the overall life cycle impacts related to the production and use of the different renewable energy sources. Impacts were assessed for unit processes and for the Finnish national renewable energy targets as a whole. The review points out that in order to comprehensively understand the overall environmental impacts of the different renewable energy sources, a thorough life cycle assessment with a unified framework would be needed. Presently there is only limited information available or the published results are not comparable with each another. However, assessment using the Finnish National Renewable Energy Targets for 2020 also indicates that under the present targets, the overall environmental impacts of the renewable energy use are likely to be low. Main impacts or risks of impacts relate to the use of forest energy.

The conversion of agricultural waste materials such as bark or straw into 2nd generation biofuels constitutes an auspicious way to meet part of the future fuel demand in a sustainable way. The number of possible production routes is diverse, and the techno-economic analyses of these routes have been conducted in very different ways. The route involving gasification, gas purification, and a subsequent Fischer-Tropsch synthesis enables the production of hydrocarbons that achieve current fuel standards after upgrading in the existing refinery infrastructure. To evaluate a promising biomass-to-liquid process, a methodology is presented that incorporates economic constraints into the process design, allowing identification of a regionally optimal process design. The production costs of the new concepts are estimated by setting up a detailed flowsheet simulation in AspenPlus® based on experimental data from the successful demonstration runs of the EU-Project COMSYN. In addition, an existing techno-economic evaluation methodology incorporated into the in-house software tool TEPET (Techno-Economic Process Evaluation Tool) has been extended to evaluate the processes’ performance in different European regions and to include transportation and refining costs. The approach enables the identification of regional sweet spots shown on a map for Central-Europe, indicating production costs and favorable process design for each region. Furthermore, the results of an automated mapping for the optimal process design depending on the heat and electricity market are presented. The performed analyses show that the techno-economic evaluation tends to expand the technology in regions with low feedstock costs, while the optimal process design is defined by the regional heat and electricity market. In this work, net production costs of less than 1.12 €2019/lbiofuel were determined for regions in Hungary, Poland and Slovakia.

During urban planning, city planners and municipal authorities make various choices that impact districts' energy efficiency and emissions significantly. However, they often lack information about the actual effects of the design options. This paper describes a methodology, embedded to a tool called Kurke, that aims to support the planning of sustainable and energy efficient urban areas by analysing the energy performance of city plans and the impacts of their energy design alternatives on carbon dioxide emissions during planning. The methodology supports holistic energy analysis of urban areas, including energy demand of buildings and transport, and comparing 10 alternatives for local energy supply. The methodology is tested in two Finnish residential and mixed-use areas. The improved transportation plans can reduce CO2 emissions 10-20% compared to the business-as-usual design in case areas. CO2 emissions from buildings' heating can be reduced 18-24%. The total CO2 reduction potential of urban planning choices varies from 2% to 78% in case areas. This shows the significant role of urban planning in reducing CO2 emissions. Therefore, it is important that urban planners understand the impacts of the design decisions. Kurke tool offers such support with fast and practical evaluation of the planning options.

AbstractGlobal biodiversity loss is most severe in freshwaters, particularly in river ecosystems. Hydropower is one of the main culprits. While being promoted as a carbon free source of renewable energy, hydropower disrupts the flow, habitats, and biota of rivers. Environmental policies and programs seek to mitigate the damage hydropower causes. Any policy action aiming at making the utilization of our rivers more sustainable must be ecologically, economically, and legally feasible. We show that the interdisciplinary feasibility of mitigation measures divides existing facilities into three categories (i) large facilities in which biodiversity mitigation measures are needed but electricity generation and balancing the electricity grid should remain as their main focus, (ii) small facilities in which dam removal and full scale river restoration measures can be taken by assisting the facilities to seize operations, preferably just before their next big investments, and (iii) medium facilities where benefits and trade‐offs associated with alternative paths should be analyzed case‐by‐case to determine the most feasible path forward. Policy action is feasible in all three categories but in different ways: requiring fish passes in the case of large facilities, helping remove dams and restoring the rivers in the case of small facilities, and focusing cost–benefit analysis efforts on the non‐trivial group of the medium sized facilities.