• Energy Research
• 11. Sustainability close
• 2. Zero hunger close
• FR close

Abstract The dates production is usually accompanied by considerable loss of fruit byproducts. The chemical analysis showed that ‘Deglet Nour’ discarded flesh is rich in soluble sugars (79.8% ± 0.8%) and fibers (12.3% ± 0.4%). A processing approach was implemented to permit the production of biohydrogen from the flesh and biogas from the crude fiber fraction after soluble sugars extraction. This approach showed interesting results since the obtained biochemical hydrogen potential and the maximum methane yield were 292 mL H2/gVS initial and 235 mL CH4/gVS fibers respectively. Parallelly, the “hot water” soluble sugar fraction (date syrup) was of interest for agro-alimentary applications and showed a high sucrose, glucose and fructose content of 33.5%, 11.8% and 13.17% respectively. This study presents a proof of concept allowing an efficient sustainable energetic conversion of the date by-products biomass to biohydrogen via dark fermentation or to soluble sugars fraction and biogas via a biorefinery approach.

Once previous industrial activity has ceased, brownfields are found in urban and suburban environments and managed in different ways ranging from being left untouched to total reconversion. These situations apply to large surface areas often impacted by residual diffuse pollution. Though significant and preventing any sensitive use, residual contamination does not necessarily require treatment. Moreover, conventional treatments show their technical and economic limits in these situations and gentle remediation options such as phytomanagement might appear more relevant to the management of those sites. Thus, these sites face up two major issues: managing moderate contamination levels and providing an alternative use of economic interest. This work proposes to assess a management strategy associating the phytoremediation of organic pollution along with the production of biomass for energy generation production. A 16-week controlled growth experiment was conducted on a soil substrate moderately impacted by multiple pollution (trace elements, mainly Zn and Pb, and hydrocarbons), by associating rhizodegradation with Medicago sativa or biomass production with Robinia pseudoacacia or Alnus incana in monocultures. The effect of a microbial inoculum amendment on the performances of these treatments was also evaluated. Results showed total hydrocarbons (TH), and to a lesser extent polycyclic aromatic hydrocarbons (PAH), concentrations decreased over time, whatever the plant cover. Good biomass production yields were achieved for both tree species in comparison with the control sample, even though R. pseudoacacia seemed to perform better. Furthermore, the quality of the biomass produced was in conformity with the thresholds set by the legislation concerning its use as a renewable energy source.

Two 4 L tubular microbial fuel cells (MFCs) were installed in a municipal wastewater treatment facility and operated for more than 400 days on primary effluents. Both MFCs removed 65-70% chemical oxygen demand (COD) at a hydraulic retention time (HRT) of 11 h and reduced about 50% suspended solids. The COD removal rates were about 0.4 (total) or 0.2 (soluble) kg m(-3) day(-1). They could handle fluctuation, such as emptying the anode for 1-3 days or different HRTs. The preliminary analysis of energy production and consumption indicated that the two MFCs could theoretically achieve a positive energy balance and energy consumption could be reduced using larger tubing connectors. Through linkage to a denitrifying MFC, the MFC system improved the removal of total nitrogen from 27.1 to 76.2%; however, the energy production substantially decreased because of organic consumption in the denitrifying MFC. Establishing a carbon (electron) balance revealed that sulfate reduction was a major electron scavenger (37-64%) and methane production played a very minor role (1.3-3.3%) in electron distribution. These results demonstrate the technical viability of MFC technology outside the laboratory and its potential advantages in low energy consumption, low sludge production, and energy recovery from wastes.

Two studies conducted in Guadeloupe (West Indies) and Réunion (Indian Ocean) islands were designed to investigate the benefits of producing sugarcane as an energy crop and to assess the influence of agroclimatic factors on energy efficiency, respectively. In this context, it is essential to know the low heating value of the dry above-ground biomass (LHVd, MJ/kg) and its energy yield (EY, MJ/m2) in order to select the best varieties and set up a payment method for growers. Eighteen Poaceae (sugarcane and Erianthus) cultivars were compared under wet tropical environmental conditions in Guadeloupe. Three sugarcane cultivars were studied in four contrasting environments in Réunion. The partition sampling and biomass measurement procedures were identical at both locations. Low heating value (LHV) predictions were achieved using near-infrared reflectance spectroscopy (NIRS) after specific calibration (Guadeloupe), or arithmetically after lignocellulosic compound prediction (Réunion). In both studies, LHV variability was very low and slightly dependent on the site, cultivar and above-ground biomass components (millable stalks and tops, and green and dead leaves). Considering the overall dry above-ground biomass (DAB, kg/m2), the LHVd was calculated by averaging 159 samples (mean 16.65 MJ/kg) in Guadeloupe and 315 samples (mean 16.45 MJ/kg) for Réunion. An excellent linear relationship between the DAB and its EY, regardless of cultivar, age and environment, was found (n = 474 and R² = 0.99). Sugarcane energy content assessment could thus be simplified by measuring the DAB, while enabling development of a faster method of payment for growers based on the DAB measurement and the correlation between DAB and EY. Finally, the findings of this study should allow growers to rapidly determine the commercial value of their sugarcane crops, and also enable purchasers to assess the amount of recoverable energy. (Résumé d'auteur)

We develop an open-source Python software integrating flexibility needs from Variable Renewable Energies (VREs) in the development of regional energy mixes. It provides a flexible and extensible tool to researchers/engineers, and for education/outreach. It aims at evaluating and optimizing energy deployment strategies with higher shares of VRE, assessing the impact of new technologies and of climate variability and conducting sensitivity studies. Specifically, to limit the algorithm’s complexity, we avoid solving a full-mix cost-minimization problem by taking the mean and variance of the renewable production–demand ratio as proxies to balance services. Second, observations of VRE technologies being typically too short or nonexistent, the hourly demand and production are estimated from climate time series and fitted to available observations. We illustrate e4clim’s potential with an optimal recommissioning-study of the 2015 Italian PV-wind mix testing different climate data sources and strategies and assessing the impact of climate variability and the robustness of the results.

An automated procedure for the characterisation by image analysis of the morphology of activated sludge has been used to monitor the biomass in a pilot wastewater treatment plant, in complement to the usual settleability (sludge volume index, settling velocity) and size distribution (by laser granulometry) measurements.