• Energy Research
• Closed Access close
• GB close
• AU close
• University of Cambridge close

This paper gives a introduction of a SMES unit using 2G HTS wires. A complete SMES system including both superconducting coils and control circuit has been designed to operate at 77 K. Three single-phase H-bridge converters have been used in the control circuit. A loop control signal is sent out by using 32 fixed point Digital Signal Processor (DSP). The complete circuit has been both modelled in simulation and built experimentally. The results validate that this SMES successfully compensates a voltage sag in a power system.

Abstract The direct carbon fuel cells with solid oxide electrolyte (DC-SOFC) and anodes deposited by inject printing (EM/DCIJP) were studied. The cells were fed with carbon fuel obtained by the direct RF plasma splitting of methane. Since the (EM/DCIJP)M/DCIJP technology allows easy modification of electrode material, the effect of Cu addition to the Ni–YSZ anode was investigated. The significant improvement of the cell performance with the new anode was observed.

AbstractEngineering the wettability of functional materials holds significant interest, focusing on the need for superhydrophobic catalysts, crucial for their ability to prevent the poisoning of active sites by water, produced in situ or as a by‐product. Herein, for the first time, a superhydrophobic spherical activated carbon (SSAC@PhSO3H) is engineered as a catalyst via a novel synthetic approach and tailored in Jatropha curcas oil (JCO) biodiesel synthesis. With a large surface area (1461 m2 g−1), high acid density (6.26 mmol g−1), and water contact angle (163.4°), the catalyst demonstrates superior performance and remarkable water repellency, firmly establishing its superhydrophobic characteristics. Response Surface Methodology based on the Central Composite Design (RSM‐CCD) approach predicted a maximal biodiesel yield of 98.8% (80 °C, 5 wt%, 15:1 methanol to oil molar ratio (MOMR), and 40 min). Life cycle cost analysis (LCCA) estimates biodiesel production cost of 0.37 USD ($) per kg emphasizing high commercial viability. Compared with H2SO4‐sulfonated biochar, SSAC@PhSO3H retains its inherent activity (86.8 ± 0.4% yield in 10th run) and spherical morphology even after nine successive reaction cycles indicating high stability. Nevertheless, JCO biodiesel's fuel properties met European Norm, EN 14 212 and American Society for Testing and Materials, ASTM D6757 standards, highlighting its potential for industrial biodiesel production.

Schrödinger [Schrödinger, E., 1944. What is Life? Cambridge University Press, Cambridge] marvelled at how the organism is able to use metabolic energy to maintain and even increase its organisation, which could not be understood in terms of classical statistical thermodynamics. Ho [Ho, M.W., 1993. The Rainbow and the Worm, The Physics of Organisms, World Scientific, Singapore; Ho, M.W., 1998a. The Rainbow and the Worm, The Physics of Organisms, 2nd (enlarged) ed., reprinted 1999, 2001, 2003 (available online from ISIS website www.i-sis.org.uk)] outlined a novel "thermodynamics of organised complexity" based on a nested dynamical structure that enables the organism to maintain its organisation and simultaneously achieve non-equilibrium and equilibrium energy transfer at maximum efficiency. This thermodynamic model of the organism is reminiscent of the dynamical structure of steady state ecosystems identified by Ulanowicz [Ulanowicz, R.E., 1983. Identifying the structure of cycling in ecosystems. Math. Biosci. 65, 210-237; Ulanowicz, R.E., 2003. Some steps towards a central theory of ecosystem dynamics. Comput. Biol. Chem. 27, 523-530]. The healthy organism excels in maintaining its organisation and keeping away from thermodynamic equilibrium--death by another name--and in reproducing and providing for future generations. In those respects, it is the ideal sustainable system. We propose therefore to explore the common features between organisms and ecosystems, to see how far we can analyse sustainable systems in agriculture, ecology and economics as organisms, and to extract indicators of the system's health or sustainability. We find that looking at sustainable systems as organisms provides fresh insights on sustainability, and offers diagnostic criteria for sustainability that reflect the system's health. In the case of ecosystems, those diagnostic criteria of health translate into properties such as biodiversity and productivity, the richness of cycles, the efficiency of energy use and minimum dissipation. In the case of economic systems, they translate into space-time differentiation or organised heterogeneity, local autonomy and sufficiency at appropriate levels, reciprocity and equality of exchange, and most of all, balancing the exploitation of natural resources--real input into the system--against the ability of the ecosystem to regenerate itself.

This paper describes the nexus of energy justice, supply and security. It advances the case that energy justice is the relatively new concept in this triangle of issues and an area requiring research. There are three central tenets of energy justice: distributional, procedural and recognition justice. Each of these tenets figures at certain stages in the energy supply chain and as a consequence there is an effect on energy supply. An example of the wind energy sector in Denmark is presented which demonstrates how the application and promotion of energy justice can enable the growth of an industry supply chain. This in turn contributes to increased energy security and national economic growth.

The drainage of a viscous gravity current into a deep porous medium driven by both the gravitational and capillary forces is considered in two steps. We first study the one-dimensional case where a layer of fluid drains vertically into an infinitely deep porous medium. We determine a transition from the capillary-driven regime to the gravity-driven regime as time proceeds. Second, we solve the coupled spreading and drainage problem. There are no self-similar solutions of the problem for the entire time period, so asymptotic analyses are developed for the height, depth and front location in both the early-time and the late-time periods. In addition, we present numerical results of the governing partial differential equations, which agree well with the self-similar solutions in the appropriate asymptotic limits.

The purpose of this paper is to provide a broad overview of the social and environmental costs and benefits of biofuels in Asia. The major factors that will determine the impacts of biofuels are: (1) their contribution to land-use change, (2) the feedstocks used, and (3) issues of technology and scale. Biofuels offer economic benefits, and in the right circumstances can reduce emissions and make a small contribution to energy security. Feedstocks that involve the conversion of agricultural land will affect food security and cause indirect land-use change, while those that replace forests, wetlands or natural grasslands will increase emissions and damage biodiversity. Biofuels from cellulose, algae or waste will avoid some of these problems, but come with their own set of uncertainties and risks. In order to ensure net societal benefits of biofuel production, governments, researchers, and companies will need to work together to carry out comprehensive assessments, map suitable and unsuitable areas, and define and apply standards relevant to the different circumstances of each country. The greatest benefits may come from feedstocks produced on a modest scale as co-products of smart technologies developed for phytoremediation, waste disposal and emissions reduction.

The local implications of the well-known flux conservation equations of Morton et al. (Proc. R. Soc. Lond. A, vol. 234, 1956, p.1) for plumes and jets are considered. Given the vertical velocity distributions of a model plume or jet, the divergence-free radial velocity distributions are calculated. It is shown that in general the velocity of the plume boundary is not described by the local total fluid velocity in this way. A two-fluid model tracking the evolution of both ‘plume’ and ‘ambient’ fluid is proposed which resolves this apparent inconsistency and also provides a way of explicitly describing the mixing process within a model plume. The plume boundary acts as a phase boundary across which ambient fluid is entrained, and the plume boundary moves at the velocity of the plume fluid. The difference between the plume-fluid radial velocity and the total fluid velocity quantifies in a natural way the purely horizontal entrainment flux of ambient fluid into the plume across the phase boundary at the plume edge.