• Energy Research
• BD close
• GB close

AbstractThis study is aimed to apply dry anaerobic digestion (DAD) for methane (CH4) enriched biogas production from unsorted organic municipal solid waste (MSW). Cumulative biogas production was monitored for 35 days of operation in batch digesters at fixed feedstock to inoculum (F/I) ratio 2. Anaerobic sludge (AS) and cow manure (CM) were used as inoculum in single and mixed modes. Several process parameters such as inoculum flow pattern (single layer, multilayer, and spiral), digestion temperature (25 to 40 °C), inoculation modes (single and mixed mode), and inoculation proportion (AS:CM = 1:1, 1:2, 1:3, and 2:1) were investigated to determine the optimum DAD conditions to maximize the CH4 laden biogas yield. The study of inoculum flow pattern showed that digester with multilayer inoculum configuration generated the maximum 555 mL cumulative biogas with the production rate of 195 mL/day (at 25 °C). Biogas production rate and cumulative biogas production were found to increase with a rise in temperature and the maximum values of 380 mL/day and 1515 mL respectively were observed at 37 °C. The mixed mode of inoculation containing AS and CM augmented the biogas yield at previously optimized conditions. Final results showed that digester with multilayer inoculum flow pattern at 37 °C produced 1850 mL cumulative biogas with 1256.58 mL CH4/kg volatile solid (VS) when the mixed inoculum was used at the AS:CM—1:2 ratio. Biogas production with this significant amount of CH4 justifies the use of the DAD process for energy (biogas) generation from widely available biomass feedstock (MSW), offering various advantages to the environment.

Organic municipal solid waste (OMSW) - a potential energy source - is creating serious environmental hazards across Bangladesh, but it can be digested for biogas production to meet the ever-increasing energy demand of the country. The present study applied the dry anaerobic digestion (DAD) process for biogas production from OMSW with inoculum cow manure (CM) and anaerobic sludge (AS) in single and mixed modes. The performance of the DAD process was evaluated in batch digesters with a multilayer inoculum flow pattern maintained at the constant mesophilic condition of 37 °C. Firstly, CM and AS were studied individually, and later on, both of them were used together in different ratios (AS:CM = 1:1, 1:2, 1:3, and 2:1) to maximize the biogas yield from the DAD process. CM alone produced a total of 2.91 ml biogas/ g of biomass over 35 days of DAD while this yield was increased to 3.19 ml/g for mixed inoculum at the ratio of 1:3. These results imply that mixed-mode inoculums would be a promising option in the DAD process for biogas production which will reduce both the energy scarcity and the burden of municipal solid waste (MSW) management. Chemical Engineering Research Bulletin 21(2020) 77-81

The rapidly declining fossil fuels are no longer able to meet the ever-increasing energy demand. Moreover, they are considered responsible for greenhouse gas (GHG) emission, contributing to the global warming. On the other hand, organic wastes, such as kitchen waste (KW) and poultry manure (PM), represent considerable pollution threat to the environment, if not properly managed. Therefore, anaerobic co-digestion of KW and PM could be a sustainable way of producing clean and renewable energy in the form of biogas while minimizing environmental impact. In this study, the anaerobic co-digestion of KW with PM was studied to assess the rate of cumulative biogas (CBG) production and methane percentage in four digester setups (D1, D2, D3, and D4) operated in batch mode. Each digester setup consisted of five parallelly connected laboratory-scale digesters having a capacity of 1 L each. The digester setups were fed with KW and PM at ratios of 1:0 (D1), 1:1 (D2), 2:1 (D3), and 3:1 (D4) at a constant loading rate of 300 mg/L with 50 gm cow manure (CM) as inoculum and were studied at both room temperature (28 °C) and mesophilic temperature (37 °C) over 24 days. The co-digestion of KW with PM demonstrated a synergistic effect which was evidenced by a 16% and 74% increase in CBG production and methane content, respectively, in D2 over D1. The D3 with 66.7% KW and 33.3% PM produced the highest CBG and methane percentage (396 ± 8 mL and 36%) at room temperature. At mesophilic condition, all the digesters showed better performance, and the highest CBG (920 ± 11 mL) and methane content (48%) were observed in D3. The study suggests that co-digestion of KW and PM at mesophilic condition might be a promising way to increase the production of biogas with better methane composition by ensuring nutrient balance, buffering capacity, and stability of the digester.

Abstract In a quest of alternative energy source of fossil fuels, lignocellulosic biomass is intensively studying to produce different liquid fuels and chemicals. Both fuel (bioethanol) and chemical (furfural) were produced simultaneously in this study through two different production routes, biochemical and thermochemical route. Actually, this study firstly defined production pathway in details for each production route from extensive literature survey. Later details production pathway simulation was carried out in Aspen Plus simulation software for each production route individually. As well as heat integration was carried out within each production route to make overall production process as energy efficient and more profitable. Finally, an economic analysis of each production route ensured economic feasibility as well as annual profitability for bioethanol and furfural coproduction in individual route. Moreover, a comparative study between production routes in terms of annual profitability showed that heat integrated biochemical route is more profitable for bioethanol and furfural coproduction. Based on processing of 658201.14 ton dry lignocellulosic biomass (corn stover) per year, heat integrated biochemical production route can produce per gallon bioethanol by $2.0 and can make $49.95 million annual profit, whereas, the values were $3.07 and $20.07 respectively for heat integrated thermochemical route.

Methanol is expected to be a possible solution for reducing global greenhouse gas emissions and minimizing the dependency on fossil fuels. This paper presents a systematic approach of methanol (MeOH) production from industrial waste gases including flue gas (FG) and coke oven gas (COG) that are considered an important threat to the environment. The impact of process parameters, including dimensional parameters (length, diameter, and number of tubes) and operational parameters (reactor temperature, pressure, and thermal fluid temperature) over the MeOH synthesis, are investigated by Aspen Plus. Firstly, the synthesis process is designed and optimized using syngas (SG) as a feed material. Secondly, by replacing the feed material with FG and COG, methanol production variability is investigated and demonstrated for the same optimized process. Afterward, an efficient heat exchange network system is developed for all three different processes using Aspen Energy Analyzer. The optimized dimensional parameters of the MeOH synthesis reactor are determined to be a length of 12 m, a diameter of 0.06 m, and 5000 tubes for achieving a conversion rate of 75%. Meanwhile, the optimized operational parameters are identified as a reactor temperature of 209 °C, reactor pressure of 70 bar, and thermal fluid temperature of 196 °C. Furthermore, the influence of the stoichiometric number (SN) on the process was observed with higher SN values resulting in increased hydrogen (H2) concentration and an improved forward reaction of MeOH synthesis, leading to higher conversion rates. The findings and insights gained from this study can serve further improvements and advancements in MeOH synthesis processes.