• Energy Research
• Closed Access close
• IN close
• GB close
• BE close
• Renewable Energy close

Abstract This paper investigates the hydrodynamics of a seabed-mounted, bottom-hinged, flap-type wave energy converter in shallow water. A conceptual model of the hydrodynamics of the device has been formulated and shows that, as the motion of the flap is highly constrained, the magnitude of the wave force on the flap is the key determinant of power capture. The results from a physical modelling program have been used in conjunction with numerical data from WAMIT to validate the conceptual model. The work finds that designing the device to increase the wave force is more profitable than designing it to be tuned to the incident wave climate. As wave force is the primary driver of device performance it is shown that the flap should fill the water column and pierce the water surface to reduce decoupling due to wave overtopping. It is concluded that, in order to maximize capture factor at a typical North Atlantic site, the flap should be approximately 20–30 m wide, with large diameter rounded side edges, having its pivot close to the seabed and its top edge piercing the water surface.

Abstract Sugarcane is a major crop cultivated globally and the residue left over after the crop harvest and extraction of juice is a good biomass source that can be used for the production of several useful chemicals. The sugarcane bagasse is an excellent substrate for the production of various biochemicals and enzymes through fermentation. Now major interest is focused on the utilization of these residue for biofuel production. The sugarcane crop residue is rich in cellulose and hemicellulose, hence it can be used for the production of bioethanol and other liquid transportation fuels. The present review gives a detailed account of the availability of sugarcane residue and various commercially important products that can be produced from this residue. It also provides recent developments in R&D on the bioconversion of sugarcane crop residue for value added products.

Abstract A vapour absorption refrigeration system (VARS) in which a transfer tank replaces the conventional solution pump is analysed. Six fluid pairs with R22 as the refrigerant and different absorbents: DMA; DMF; DMETEG; DMETrEG; DMEDEG; and NMP are considered. Variations in COP, circulation ratio, percent mass of generated vapour utilised for transfer-tank operation, and minimum generator temperature are compared over a wide range of operating conditions. In general, R22-DMA, R22-DMF, and R22-DMETrEG are preferable for a transfer-tank operated VARS. At high generator temperatures or low condenser temperatures, R22-DMA gives the best overall performance. When the temperatures of the evaporator, absorber, and condenser are high, one may prefer R22-DMF as the working fluid.

Abstract For the past few decades, the drastic increase in the installed capacity of wind farms (WFs) has necessitated a computationally efficient dynamic equivalent model of a WF, which can be used for accurate power network simulations. Various doubly-fed induction generators (DFIGs) with sophisticated power control, rotor, and grid side converter control based models for wind turbine (WT) exist in the literature. However, these models are computationally burdensome and restrict their application for modeling large WFs. Thus, an equivalent DFIG based model of a WF, with the rotor circuit modeled as a constant current source, is proposed in this paper. The proposed model is simple and computationally efficient as no rotor measurements are required, and voltage and current measurements at the point of common coupling (PCC) of the WF are used in extended Kalman filter (EKF) to evaluate the dynamic parameters of the equivalent DFIG. A Y b u s based reduction is also proposed for the equivalent collector system’s impedance. Simulation results on a test WF in MATLAB Simulink and DIgSILENT prove the proposed model’s efficacy over the existing equivalent models for different operating conditions like wake effect and contingencies in the interconnected power system network.

Abstract In this paper, a strategy is proposed in order to introduce in a realistic way wind generation into a transmission power system non sequential Monte Carlo adequacy study with economic dispatch. Thanks to the implemented solution, wind generation is consequently confronted to operational constraints related to high powered thermal units, nuclear parks or thermal machines with technical minimum value. Moreover, during each simulated system state, a DC load flow is also calculated in order to evaluate reinforcements optimizing the large scale integration of wind power production. The simulation tool modified during the present work is called Scanner© and is the property of Tractebel Engineering (Gaz de France – Suez) company. It has been here applied to an academic test system: the Roy Billinton Test System (RBTS).

Abstract The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NOx. Overall fish biodiesel showed good combustion properties and environmental benefits.

Abstract A novel approach to the intensification of renewable and sustainable production of photoautotrophic ethanol from microalgae was investigated using periodic ultrasonication. The effect of utilizing ultrasonic pulsing during ethanol production using a metabolically engineered ethanol producing cyanobacterium Synechocystis PCC6803 strain NAV001 was analysed with an ultrasonic frequency of 20 kHz. Ultrasonic treatment resulted in enhancement of ethanol yields. The ethanol yield was found to be higher when ultrasonic pulsing was initiated during the exponential phase of growth. The optimum ultrasonic conditions for enhanced yield of ethanol within this model system was found to be 30 °C, 15% of power input (97.5 W) and 10 min pulse time. The cytotoxic effect of ultrasonic pulsation was investigated by analysing the survival percentage and auto-fluorescence of the cyanobacterium via imaging by confocal laser scanning microscopy. The overall effect of ultrasonic dose on ethanol production and growth rate of microalgae was analysed by using Haldane inhibition kinetics.