• Energy Research
• Closed Access close
• Open Source close
• 11. Sustainability close
• 15. Life on land close
• GB close
• CA close
• DE close

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

Abstract This study develops a novel sustainability assessment methodology for energy systems using life-cycle emission factors and sustainability indicators. Here, the global warming and environmental impact dimensions of the sustainability assessment methodology are examined in detail. A comparative analysis shows that a wind-battery system produces fewer potential global warming, stratospheric ozone depletion, air pollution, and water pollution impacts compared to a gas-fired system. The wind-battery system generates 13% of the life-cycle GHG emissions and 22% of the life-cycle ozone-depleting substance emissions of a gas-fired power plant. Nitrous oxide contributes more than 90% of the stratospheric ozone depletion potential of gas-fired and wind-battery systems.

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

Cogeneration of heat and electricity is an important pillar of energy and climate policy. To plan the production and distribution system of combined heat and power (CHP) systems for residential heating, suitable methods for decision support are needed. For a comprehensive feasibility analysis, the integration of the location and capacity planning of the power plants, the choice of customers, and the network planning of the heating network into one optimization model are necessary. Thus, we develop an optimization model for electricity generation and heat supply. This mixed integer linear program (MILP) is based on graph theory for network flow problems. We apply the network location model for the optimization of district heating systems in the City of Osorno in Chile, which exhibits the “checkerboard layout” typically found in many South American cities. The network location model can support the strategic planning of investments in renewable energy projects because it permits the analysis of changing energy prices, calculation of break-even prices for heat and electricity, and estimation of greenhouse gas emission savings.

Abstract The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK–Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

Abstract Geological sequestration of CO 2 is an immediately available and technologically feasible means of reducing CO 2 emissions into the atmosphere, which is particularly suited to landlocked sedimentary basins. Geoscience, engineering, economic and public issues need addressing by governments and industry before proceeding with full scale implementation. Specific site selection should be based on a suitability analysis, a proper inventory of potential sites, an assessment of the fate of the injected CO 2 and a capacity determination, together with surface criteria such as CO 2 capture and transport. The suitability analysis, both at the basin and regional scales, is based on geological, geothermal, hydrodynamic, basin maturity, economic and societal criteria. The inventory of sequestration sites needs also identification of major CO 2 point sources and a cost benefit analysis. The potential for CO 2 escape and migration is a deciding factor in screening out unsafe sites. Site capacity should be determined based on in situ conditions and CO 2 properties and behavior. Transforming the geological space into the CO 2 space is an important step along the road map for selection of suitable CO 2 injection sites that allows the identification of safe large capacity sites. An example of application from the Alberta basin is presented.

Abstract Eradicating poverty and mitigating greenhouse gas (GHG) emissions are core issues of global sustainable development goals (SDGs), and China is struggling in realizing these targets. The poverty reduction that leads to popualtion structure and lifestyle changes would have an impact on GHG emission changes. However, few studies have assessed the historical and future impacts of the poverty allevation on China's emissions. Here by linking Chinese Multi-Regional Input Output (MRIO) database to the global MRIO database EXIOBASE, and using provincial household consumption data, we identified the distribution of Chinese household greenhouse gas footprints (HGFs) by income groups in 2015 at the national and provinical levels. Moreover, we focused on the historical impact of poverty alleviation on HGFs during 2010–2015, and developed four scenarios to project future HGFs changes due to poverty alleviation by 2030. We find that eradicating extreme poverty in the secanrio S2, i.e., bringing people to an income above $1.9 daily, does not cause a large emission impact with current technological level. However, lifting people from a higher poverty line of $5.5 per day in the sceanrio S4 results in a 1.6% increase in emissions compared with the scenario S1 without any poverty reduction goals. Furthermore, realizing a higher poverty reduction target will result in an increase of emissions contribution from internatioanl supply chains due to the differences in consumption patterns among different income groups. Our study highlights the conflict between the high poverty alleviaition goal and emission reduciton in China, and reminds us of the need to make more technological efforts for avoiding the large emissions embodied in international supply chains.

Abstract In order to further reduce the impact of climate fluctuations on the typical meteorological year (TMY) database, this paper introduces an ensemble empirical model decomposition method to extract the periodic fluctuation and random fluctuation data from outdoor climate data separately, and to construct a comprehensive description parameter that eliminates the influence of random fluctuation data. An innovative TMY based on the comprehensive description parameter was developed in six selected cities of different climate zones in China. Compared with the existing Chinese TMY development method and outdoor design parameters, it is found that the typical meteorological months (TMMs) of each city and the outdoor design parameters from the improved TMY database have changed to a certain extent. Through the correlation analysis between improved TMY database and the cumulative long-average meteorological data, it reveals that the improved TMY can better describe the local average climatic characteristics. Finally, this paper discusses the impact of the improved TMY on the building heat loss index and outdoor thermal comfort in different building shapes. The results demonstrate that the energy demand and outdoor thermal comfort analysis based on the improved TMY are closer to long-term averaged outdoor climate, and the calculation deviations compared with conventional method are reduced by 1.18%–21.08% and 53.42%–76.82% respectively. This research will refine outdoor climate data for building design and analysis.

Abstract Decentralised energy in the UK is rare. Cities in the north of England however lead the UK in terms of sustainable, low-carbon, local/district heating, through the implementation of combined-heat-and-power (CHP) facilities; substantial schemes are installed in several cities, including Barnsley and Sheffield. This paper presents the results from extensive experimental and theoretical feasibility studies, in which the merits of these were explored. Barnsley has a number of biomass-fuelled community energy generators, where pollutant monitoring and mathematical modelling were conducted to assess combustion characteristics and overall system performance. Measured pollutant levels were within the relative emission limits, though emission concentrations (CO, CO2, NO and particles) in the flue gas from the coal boiler were higher than the wood pellet boiler. Sheffield already has a citywide district energy network, centred around a sustainably-sourced waste-to-energy facility; an expansion of this scheme was investigated here. This focuses mainly on the link to a 30 MW wood-fired CHP plant, which could be a significant provider of additional thermal capacity (low-grade heat) to an expanded network. Through identifying heat sources and sinks – potential suppliers and end-users – key areas were identified where a connection to the heat network would be feasible.