• Energy Research
• Closed Access close
• GB close
• CA close

Abstract Bio-based polyurethane (BPU) foams were successfully prepared using hydrothermally liquefied wheat straw (WS) to substitute a mass fraction of up to 50% of polyols. Response surface methodology (RSM) based on central composite design (CCD) was employed to optimize four process parameters: NCO/OH molar ratio, loading of crosslinking agent (glycerol), loading of catalyst (a mixture of triethylene diamine, stannous octoate, and triethanolamine), and loading of blowing agent (water) for the maximum compression strength of the rigid BPU foams. With the quadratic orthogonal regression model, verified by experimentation, the maximum compression strength of approximately 180 kPa was obtained at the following optimal conditions: NCO/OH molar ratio of 1.24:1, glycerol addition of 12.11%, catalyst loading of 0.76%, and blowing agent addition of 1.31% in relation to the total mass of polyols. The BPU foam prepared at the optimal conditions exhibits good thermal conductivity (0.045 Wm−1K−1) and thermal stability, comparable to those of a reference foam prepared with 100% PPG400.

Abstract In many visions and roadmaps, there is a broad agreement that fuel cells – both for stationary and mobile applications – are the key technology to allow the development of a hydrogen infrastructure. Furthermore, this development is generally thought to be based on a gradual, decentralised evolution. Nevertheless, in this paper it is argued that, taking into account the entire hydrogen chain (production, transport, storage, distribution and end-use), this decentralised fuel-cell based philosophy shows some serious flaws. Therefore, a new hydrogen-transition approach was pushed forward: mixing in of hydrogen into the natural-gas bulk. Using Flanders – the Northern part of Belgium – as a case study, the development of a transitory hydrogen infrastructure has been studied, taking into account the entire hydrogen chain and its dynamics, from production to end use. In a next step, this transition is being quantified. An optimisation model has been developed using Matlab and the commercial solvers GAMS and CPLEX. Following a mixed-integer linear-programming approach, this model is able to determine the economically optimal hydrogen-production mix and operational behaviour of each hydrogen-production plant separately. The model then allows gaining valuable insights in the importance of storage and the influence of fuel prices and carbon taxes with regard to the development of an early hydrogen economy.

Abstract In the new competitive electricity supply industry, there is a renewed interest in algorithms that can provide savings in operation costs. An optimal scheduling of generators can provide substantial annual savings in fuel costs, but this highly constrained non-linear mixed integer optimisation problem can only be full v solved by complete enumeration, a process which is not computationally feasible for realistic power systems. In the recent past, evolutionary computation techniques have been applied to the solution of the unit commitment problem, but when implemented as stand alone systems, they suff er from computational time limitations, especially when the systems are scaled up. This paper proposes a hybridgenetic algorithm incorporating a priority list unit ordering scheme to solve the generator scheduling problem. Test results on networks with up to 110 generators are presented and the results demonstrate the viability of the hybrid GA method for unit commitment in realistic power systems.

AbstractThe presented synthesis of the title compounds (II), (IV), (VI) and (VIII) is extremely simple and highly efficient without the use of any chromatographic purification.

This paper gives a introduction of a SMES unit using 2G HTS wires. A complete SMES system including both superconducting coils and control circuit has been designed to operate at 77 K. Three single-phase H-bridge converters have been used in the control circuit. A loop control signal is sent out by using 32 fixed point Digital Signal Processor (DSP). The complete circuit has been both modelled in simulation and built experimentally. The results validate that this SMES successfully compensates a voltage sag in a power system.

Abstract The influence of the solid-phase wall boundary condition was investigated in Eulerian–Eulerian numerical simulations of a bubbling fluidized bed. Parametric studies of the particle–wall restitution coefficient and specularity coefficient were performed to evaluate their impact on the predicted flow hydrodynamics in terms of bed expansion, local voidage, and solid velocity. Both two- and three-dimensional simulations were conducted and compared with available experimental data on solid velocity and bubble properties. It is found that the wall effect plays an important role in CFD models. Such factors as the voidage at the bubble boundary, averaging method, and minimum bubble size also influence the mean bubble diameter.

This paper is concerned with the risk management practices of an electricity retailer motivated by the Dutch electricity market. We examine the effectiveness of the existing base- and peak-load futures contracts as a risk management tool for the electricity retailers. We analytically characterize the retailer’s optimal hedging policy as a function of the serial correlation of the prices and the demand profiles of its customers. We find that the retailer typically over-hedges in the futures market, and the over-hedging amount increases when both base- and peak-load contracts are used. Our findings indicate that although the existing contracts in the futures market are quite efficient to replicate the exposure from profiled customers, when industrial consumers and renewable generation are included to the retailer’s portfolio, the effectiveness of such contracts decreases substantially. In our motivating example, hedging the risk of the profiled customers with base-load contracts, the firm may reduce the variance of its cash flows by 85.9%. In addition to the base-load contracts, including peak-load contracts into the hedging portfolio of the retailer increases the efficiency of hedging to 89.3%. However, when we consider the aggregate portfolio of the retailer including profiled customers, industrial consumers and renewable contracts, the efficiency of hedging through the existing futures contracts goes down as low as 32.8% during certain periods. © 2022, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.

This paper presents an experimental study of indoor thermal environment near a full-scale glass facade with different types of shading devices under varying climatic conditions in winter. Interior glazing and shading temperature, operative temperature and radiant temperature asymmetry were measured for facade sections with roller shades and venetian blinds at different positions. Interior glass surface temperatures can be high during sunny days with low outdoor temperature. Shading systems significantly improved operative temperature and radiant temperature asymmetry during cold sunny days, depending on their properties and tilt angle. During cloudy days the impact was smaller, however the shading layers could still decrease the amount of heat loss through the facade. A transient building thermal model, which also calculates indoor environmental indices under the presence of solar radiation, was developed and compared with the experimental measurements. Part II of this paper uses this validated model with a transient, two-node thermal comfort model (including transmitted solar radiation) for assessment of indoor environmental conditions with different building envelope and shading properties, facade location and orientation.

Patients with pure autonomic failure (PAF) and multiple system atrophy (MSA) may complain of feeling light-headed after alcohol ingestion particularly on assumption of the upright posture. The reasons for this have not been investigated. We therefore studied the effects of oral alcohol (40% vodka in sugar-free orange juice) and placebo (juice only) on the systemic and regional (including superior mesenteric artery, SMA) blood flow in nine patients with PAF and six patients with MSA. After alcohol, there was a fall in supine blood pressure (BP) and vasodilatation in the SMA but no change in cardiac output, or forearm muscle and cutaneous blood flow in either PAF or MSA; BP fell further during head-up tilt with no changes in levels of plasma catecholamines. After placebo, there were no changes while supine. We conclude that alcohol lowers supine BP and dilates the SMA with no change in muscle or cutaneous blood flow. Alcohol also enhances the fall in BP during head-up tilt. This may explain the symptoms experienced by PAF and MSA patients after alcohol.