• Energy Research
• Closed Access close
• Restricted close
• Embargo close
• CN close
• GB close
• CA close
• AU close

A template‐agent can affect defect formation as well as influence interface properties, due to the rapid growth of perovskite film from the solution. Herein, diethylammonium iodide (DAI) is used as an effective template‐agent to control the perovskite crystallization during preparation. It is found that a very small amount of DAI in chlorobenzene (CB) can slow down the perovskite growth of the CH3NH3PbI3 (MAPbI3) film with more large grain size and compacted crystal‐grains resulting in the lesser grain boundaries (GBs) in favor of carrier transport in perovskite solar cells (PSCs). Moreover, some redundant PbI2 can be digested to form DA2PbI4. One part of DA2PbI4 can form the sub‐grains with the composition of (DA2PbI4)0.2(PbI2)0.8 to passivate the GB defects, and other part can cover the surface to passivate the surface defects in large MAPbI3 grains. Using an optimized DAI concentration of 0.5 mg mL−1 in CB solution, the corrsponding MAPbI3 PSC achieves an increased power conversion efficiency of 20.31% with suppressed current–voltage hysteresis. This DAI passivation strategy provides a simple approach to effectively assist the grain‐growth for improved device performance.

Abstract To obtain high yield and high concentration glucose from corncob residues (CRs), tetrahydrofuran (THF) + H2O co-solvent pretreatment was employed. The pretreatment parameters were firstly optimized by Box-Behnken Design of response surface method, and the maximum glucose yield (498.2 mg/g CRs) was obtained via enzymatic hydrolysis after pretreated under optimized conditions (53.7% THF concentration, 202.3 °C, 1.05 h). Then, the pretreated CRs under optimized conditions (optimized-CRs) were enzymatically hydrolyzed at high solid loading (15%–20%) and low enzyme input (5–8 FPU/g cellulose). The high concentration glucose production (128.6 mg/mL) was obtained from optimized-CRs after enzymatic hydrolysis at 20% solid loading with 10 FPU/g cellulose for 72 h, and then showed potential for reduction of enzyme input. Finally, the interactions between the 9 substrate-related factors and cellulose conversion were analyzed through correlation analysis, and found that Klason lignin remained in the cellulose-rich fractions and pseudo lignin condensed on the surface of the recovered substrate were the predominant inhibitors for enzymatic hydrolysis.

Abstract The prime purpose of this work is to prepare a novel kind of Pickering interfacial solid catalysts for biodiesel production to meet the requirements of highly efficiency and environmental benign. To achieve this goal, the core–shell P[xSPA-yDABCO]@SiO2@Fe3O4 composite materials with a shell of photo-responsive and base catalytic sites were manufactured by means of layer-by-layer fabrication method. The modified materials, entirely characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectra, X-ray powder diffraction (XRD) and magnetization versus magnetic (VSM) techniques, demonstrated sufficient catalytic active sites and photo-responsive sites. Among all the so-prepared catalysts, P[3SPA-2DABCO]@SiO2@Fe3O4 performs extremely well and can stabilize soybean oil-in-methanol Pickering emulsion for 24 h, achieving a biodiesel yield up to 98.2% at a catalyst dosage of 5 wt% after the reaction time of 5 h at 60 °C. Furthermore, the double responsive solid catalyst can be readily separated from the mixture of reaction by an external magnet and UV irradiation, and still presented superior catalytic activity after 6 cycles.

AbstractCumulus‐intact and ‐denuded unfertilized oocytes from two mouse strains were exposed to 1.5 m ethanol (EtOH) or two cryoproteclant solutions, 1.5 M propanediol (PROH) or 1.5 M dimethylsulfoxide (DMSO), for 4.5 min at 27°C, and the proportion of activating or degenerating oocytes studied. Exposure to DMSO did not significantly increase activation above that of oocytes not exposed to DMSO. Treatment of oocytes in PROH resulted in the activation of up to 87% of viable oocytes. This was significantly higher (P <01) than in control oocytes and comparable to the rate of activation after treatment with EtOH (59–96% activation). In solutions at 1°C, 47% of control oocytes were activated, which was not significantly different from the rate of activation in EtOH (36%) or PROH (50%) at 1°C. Following treatment with PROH, up to 87% of oocytes degenerated within a period of 6 h in vitro. The age of the oocytes (h post hCG) and the time of cumulus removal with the enzyme hyaluronidase, relative to the time of exposure to the chemicals, influenced the level of degeneration in most groups. Significantly fewer oocytes degenerated when cumulus cells were removed before treatment (0–31%) than when the cumulus was left intact throughout the treatment and 6 h culture period (10–87%). Exposure to PROH at 1°C reduced oocyte degeneration to 5%. We conclude that PROH causes significantly greater losses of oocytes as a result of parthenogenetic activation and degeneration than of exposure to DMSO.