• Energy Research
• Restricted close
• Open Source close
• 7. Clean energy close
• 8. Economic growth close
• GB close
• CN close
• CA close

Abstract The kinetics of methane hydrate decomposition was studied using a semibatch stirred-tank reactor. The decomposition was accomplished by reducing the pressure on a hydrate slurry in water to a value below the three-phase equilibrium pressure at the reactor temperature. The data were obtained at temperatures from 274 to 283 K and pressures from 0.17 to 6.97 MPa. The stirring rates were high enough to eliminate mass-transfer effects. Analysis of the data indicated that the decomposition rate was proportional to the particle surface area and to the difference in the fugacity of methane at the equilibrium pressure and the decomposition pressure. The proportionality constant showed an Arrhenius temperature dependence. An estimate of the hydrate particle diameters in the experiments permitted the development of an intrinsic model for the kinetics of hydrate decomposition.

Abstract Thermal energy storage (TES) systems are growing to a relevant role in solar cooling applications. Hence, high energy density is a desirable property of the TES system. Phase change materials (PCM) helps to increase this characteristic. A high temperature pilot plant able to test different types of TES systems and materials was designed and built at the University of Lleida (Spain). This pilot plant is composed mainly of three parts: heating system, cooling system, and different storage tanks. Two identical storage tanks based on the shell-and-tubes heat exchanger, one of them including 196 squared fins in the bundle of the tubes and the other without, were experimentally tested. Hydroquinone was selected as the storage material, having a latent heat of 205 kJ/kg and a phase change temperature between 168 and 173 °C. The aim of this paper is to test experimentally, and compare the average effectiveness of the TES systems analyzed using PCM for solar cooling and refrigeration applications. It was found out that for the same tank configurations (shell-and-tubes) even changing drastically the dimensions of the tank or the number and the diameter of the tubes, the average effectiveness curve proposed in the literature fits well with the results showed here.

The development of heat transfer fluids (HTF) and heat storage materials (HSM) is crucial to design concentrating solar plant (CSP). Binary alkaline nitrate mixtures are currently used as sensible thermal energy storage materials. However, multi-component nitrate/nitrite systems were proposed as possible better candidates. In particular, ternaries mixtures containing sodium, potassium, and calcium are extremely promising as thermal fluids, given their reduced toxicity and greater cost-effectiveness. Nevertheless, very few data are present in the scientific literature regarding the correspondent phase diagram, and only the properties of specific compositions are reported. For this reason, a regular solution model was developed and employed in this work, and validated by comparing the simulation results with experimentally obtained phase change values. In particular, given that the common calorimetric techniques are impracticable for detecting the transition temperatures of calcium containing nitrate mixtur...

<div class="section abstract"><div class="htmlview paragraph">The introduction of new light-duty vehicle emission limits to comply under real driving conditions (RDE) is pushing the diesel engine manufacturers to identify and improve the technologies and strategies for further emission reduction. The latest technology advancements on the after-treatment systems have permitted to achieve very low emission conformity factors over the RDE, and therefore, the biggest challenge of the diesel engine development is maintaining its competitiveness in the trade-off “CO₂-system cost” in comparison to other propulsion systems. In this regard, diesel engines can continue to play an important role, in the short-medium term, to enable cost-effective compliance of CO₂-fleet emission targets, either in conventional or hybrid propulsion systems configuration. This is especially true for large-size cars, SUVs and light commercial vehicles.</div><div class="htmlview paragraph">In this framework, a comprehensive approach covering the whole powertrain is of primary importance in order to simultaneously meet the performance, efficiency, noise and emission targets, and therefore, further development of the combustion system design and injection system represent important levers for additional improvements. For this purpose, a dedicated 0.5 dm³ single-cylinder engine has been developed and equipped with, a state-of-the-art Euro 6 combustion system, and an advanced common rail fuel injection system (FIS) offering higher flexibility in terms of injection strategy and higher quantity accuracy. Three injector nozzles with different hydraulic flow rates (HF) have been selected and employed for the overall combustion process optimization.</div><div class="htmlview paragraph">The optimization has been performed by means of an extensive DoE-based test campaign in which the engine and FIS operating parameters have been parametrized with the aim to carry out a proper combination in terms of HF and injection strategy. The results at partial load conditions evidence significant advantages in applying an advanced injection pattern, while the HF reduction can significantly improve the smoke emission and combustion noise without fuel consumption penalties. Therefore, a proper combination and optimization of the HF and injection strategy can provide low noise and engine-out smoke while maintaining the rated power performance targets.</div></div>

This paper deals with the medium between two reconfigurable sensor nodes characterized by radio interfaces that support multiple channels for exchanging real-time messages under energy constraints. These constraints are violated if the consumed energy in transmission is higher than the remaining quantity of energy. A reconfiguration, i.e., any addition or removal of tasks in devices and consequently of messages on the medium, can cause the violation of real-time or energy constraints at run time. To achieve a feasible scheduling in time (i.e., message deadlines will be respected) and energy (i.e., there is available energy) on the medium, we propose new dynamic solutions: Balance, Dilute, and a Combination of them to manage any addition or removal of messages. The proposed approach utilizes the energy harvesting techniques and the PowerControl algorithm to reduce the nonharvested consumed energy. The proposed strategies achieve significant improvement over existing methods and provide the highest percentage of adding messages, with a lower average in response time and energy consumption. They reach a percentage of success in adding the highest priority messages while meeting deadlines up to 85%.

Artículos en revistas Numerical models of transmission-constrained electricity markets are used to inform regulatory decisions. How robust are their results? Three research groups used the same data set for the northwest Europe power market as input for their models. Under competitive conditions, the results coincide, but in the Cournot case, the predicted prices differed significantly. The Cournot equilibria are highly sensitive to assumptions about market design (whether timing of generation and transmission decisions is sequential or integrated) and expectations of generators regarding how their decisions affect transmission prices and fringe generation. These sensitivities are qualitatively similar to those predicted by a simple two-node model. info:eu-repo/semantics/publishedVersion

Coherence in Photosynthesis It is unclear how energy absorbed by pigments in antenna proteins is transferred to the central site of chemical catalysis during photosynthesis. Hildner et al. (p. 1448 ) observed coherence—prolonged persistence of a quantum mechanical phase relationship—at the single-molecule level in light-harvesting complexes from purple bacteria. The results bolster conclusions from past ensemble measurements that coherence plays a pivotal role in photosynthetic energy transfer. Hayes et al. (p. 1431 , published online 18 April) examined a series of small molecules comprised of bridged chromophores that also manifest prolonged coherence.