• Energy Research
• Closed Access close
• Restricted close
• GB close
• DE close

Abstract In this paper, the possibility of applying a Power System Stabilizer (PSS) via the governor-turbine system of a generating unit is studied for both single-machine and multimachine power systems. The results of analysis and simulation show that the conventional exciter-based PSS can be used in conjunction with the modern high-speed governor to suppress low-frequency oscillations in power systems. This arrangement of stabilizer possesses better robustness to the changes of power system operating conditions. Furthermore, in the environment of a multimachine power system, the control of PSS on the governor of every generator can be locally synthesized to stabilize the whole system, PSS design becomes much easier and simpler.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

Abstract Amorphous and microcrystalline silicon single layers and p–i–n solar cells were produced dynamically using an inline deposition system called “line source”. A highly uniform deposition of thin-film silicon layers with layer-thickness variations of less than ±5% was achieved. Amorphous and microcrystalline silicon single junction solar cells were dynamically fabricated with initial efficiencies of 8.3% and 6.3%, respectively. The dynamic deposition rate of these solar cells is 6.75 nm m/min in case of a-Si:H and 3.3 nm m/min for μc-Si:H. In this work it will be shown that an enhancement of the deposition rate up to 15.6 nm m/min during the i-layer deposition of a-Si:H solar cells has only a weak negative influence on the initial efficiencies of the cells. Further on, the effect of substrate velocity on solar cell characteristics of a-Si:H solar cells is investigated. Finally, a productivity estimation of the line source concept is presented.

Abstract The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK–Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

Abstract A new method for providing ventilation in large enclosures, which utilizes the principle of ‘selective withdrawal’ of contaminants while ensuring energy-efficiency and allowing a better use of space, is presented in this study. The concept is based on dividing the enclosed space ventilation-wise into separate zones using a combination of horizontal partitions by stratification and vertical partitions by temporary walls. This gives a high degree of flexibility in the use of available space. The relative influence of all the parameters on the flow patterns inside an enclosure is discussed in order to identify the design parameters that should be controlled to apply the technique successfully. An experimental study in a scale model was conducted, which provided a better understanding of the physical processes that occur in such enclosures. The influence of exhaust location on the flow field was studied in particular. It was found that by controlling the position of exhaust the stratification effects are enhanced and maintained at a desired level in order to achieve a successful utilization of the selective ventilation system.

Abstract Solutions containing hydrofluoric acid (HF), hydrochloric acid (HCl), and hydrogen peroxide (H2O2) were investigated as novel acidic, NOx-free etching mixtures for texturing of monocrystalline silicon wafers. High etch rates of up to 13.3 nm s−1 were observed at room temperature, which are comparable to the etch rates of KOH-IPA solutions. The silicon surface was investigated by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM), indicating pyramidal textures for diamond wire and SiC-slurry sawn as well as saw-damage etched (polished) wafers. Non-stirred baths generate random pyramidal structures while constantly stirred solutions generate novel random inverted pyramidal surface structures. The light trapping efficiency of wafers etched by the HF-HCl-H2O2 solutions was compared by UV/vis-reflectivity measurements to KOH/i-propanol specimens indicating lower reflectivities for the HF-HCl-H2O2-treated samples. Using the ‘wafer ray tracer’ (pvlighthouse.com) the light absorption properties of monomodal and random inverted pyramid structures were simulated and compared to well-known random and monomodal textures for PERC solar cells, clearly indicating the best performance for random inverted pyramids. Besides, simulation of a PERC solar cell on a roof top at our university was performed, indicating improved performance, especially for random inverted pyramid textures.

Virtually developing of automotive power systems is currently experiencing increasing significance due to elevated vehicular electrification and automation of driving functions. The analysis of system-inherent disturbances requires accurate simulation models for both short-term transients or long-term driving cycles. The electrical behavior of electromechanical actuators such as brake or steering highly depends on the mechanical environmental interaction being dependent many variables. This contribution presents a methodology to extract abstracted models of machine driven actuators on the basis of an electric steering. The dynamics of a complex electromechanical model are investigated using pulse response analysis for differentiated operation points. The obtained model reduction is implemented in a frequency-dependent equivalent circuit.

The thermo-hydro-mechanical behaviour of a water-saturated cement-based heat store for domestic applications has been investigated. Numerical simulations have been employed to locate the critical regions during thermal loading, for which analytical solutions have been derived and validated by numerical simulations. The analytical solutions allow a fast screening of materials and design parameters in relation to the stresses induced by thermomechanical loading. Maximum stresses in the system have been quantified based on the thermomechanical properties of three heat exchanger materials selected by design engineers and of the filling material. Sensitivity analyses indicate that the stress distribution is very sensitive to the thermal expansion coefficients of the involved materials. The results of this study can serve as a guide line for the design of the present and similar heat storage systems. The analytical solution developed is a fast and robust method for the evaluation of stresses around heat exchangers embedded in a solid material and can serve as a tool for design optimisation.

Abstract Passivated emitter and rear cells (PERC) are considered to be the next generation of industrial-type screen-printed silicon solar cells. Deposition methods for rear passivation layers have to meet both the high-throughput and low-cost requirements of the PV industry in combination with high-quality surface passivation properties. In this paper, we evaluate and optimise a novel deposition technique for AlO x passivation layers by applying an inductively coupled plasma (ICP) plasma-enhanced chemical vapour deposition (PECVD) process. The ICP AlO x deposition process enables high deposition rates up to 5 nm/s as well as excellent surface recombination velocities below 10 cm/s after firing. A fixed negative charge of −4×10 12 cm −2 is measured for ICP AlO x single layers with an interface state density of 11.0×10 11 eV −1 cm −2 at midgap position. When applied to PERC solar cells the ICP AlO x layer is capped with a PECVD SiN y layer. We achieve independently confirmed conversion efficiencies of up to 20.1% for large-area (15.6×15.6 cm 2 ) PERC solar cells with screen-printed metal contacts and ICP AlO x /SiN y rear side passivation on standard boron-doped Czochralski-grown silicon wafers. The internal quantum efficiency reveals an effective rear surface recombination velocity S rear of (90±30) cm/s and an internal rear reflectance R b of (91±1)% which demonstrates the excellent rear surface passivation of the ICP AlO x /SiN y layer stack.