• Energy Research
• 2021-2025close
• CN close
• GB close
• HK close

The data resource consists of half hourly time series of heat (latent and sensible) and trace gas (carbon dioxide and methane) fluxes obtained by eddy-covariance, gas concentrations and ancillary meteorological data (e.g. air temperature, relative humidity, pressure, photosynthetically active radiation, total incoming radiation, wind speed and direction). The data were collected at Guma Lagoon (18°57'53.01"S; 22°22'16.20"E), in the perennially flooded area of the Okavango Delta, Botswana, for the purpose of quantifying greenhouse gas fluxes over a Cyperus papyrus stand. The measurement period was 01/01/2018 to 31/12/2020. The instrumentation was installed the UK Centre for Ecology and Hydrology; monthly maintenance and data collection visits were effected by the Okavango Research Institute, University of Botswana. The research was funded through NERC grant reference NE/N015746/2 - The Global Methane Budget. Raw data from the eddy-covariance instrumentation were processed into half-hourly fluxes using the EddyPro software package version 7.0.6 and quality controlled by Dr Helfter. An automatic weather station recorded recorded air temperature, pressure, relative humidity, wind speed and wind direction, total solar radiation and photosynthetically active radiation (PAR). Data from both instruments were downloaded, processed and deposited into the EIDC as a comma separted value (.csv) file.

The dataset comprises full list of species of macrozoobenthos collected from the Pechora Sea (SE Barents Sea). Grab samples were collected from 10 stations in the Pechora Bay from aboard RV Kartesh in 2020-2021. Macrobenthic invertebrates were identified with the maximum level of certainty through optical microscopy using regional taxonomic keys. All taxonomic names were standardised using the World Register of Marine Species (WoRMS). All specimens have been counted and weighted (wet biomass) on Ohaus Adventurer scales with reported accuracy to 0.01 g. Bivalve molluscs and gastropods were weighed in shells. Biomass (g. m-2) and abundance (ind m-2) are used to characterise macrozoobenthos. The sampling and identification work was carried out in collaboration with specialists from Lomonosov Moscow State University Marine Research Center and P.P. Shirshov Institute of Oceanology.

Large-scale reforestation can potentially bring both benefits and risks to the water cycle, which needs to be better quantified under future climates to inform reforestation decisions. We identified 477 water-insecure basins worldwide accounting for 44.6% (380.2 Mha) of the global reforestation potential. As many of these basins are in the Asia-Pacific, we used regional coupled land-climate modelling for the period 2041–2070 to reveal that reforestation increases evapotranspiration and precipitation for most water-insecure regions over the Asia-Pacific. This resulted in a statistically significant increase in water yield (p < 0.05) for the Loess Plateau-North China Plain, Yangtze Plain, Southeast China and Irrawaddy regions. Precipitation feedback was influenced by the degree of initial moisture limitation affecting soil moisture response and thus evapotranspiration, as well as precipitation advection from other reforested regions and moisture transport away from the local region. Reforestation also reduces the probability of extremely dry months in most of the water-insecure regions. However, some regions experience non-significant declines in net water yield due to heightened evapotranspiration outstripping increases in precipitation, or declines in soil moisture and advected precipitation. This dataset contains raw data outputs for Teo et al. (2022), Global Change Biology. Please see the published paper for further details on methods. For enquiries, please contact the corresponding authors: hcteo [at] u.nus.edu or lianpinkoh [at] nus.edu.sg.  Shapefiles can be opened with any GIS program such as ArcMap or QGIS. CSV files can be opened with any spreadsheet program such as Microsoft Excel or OpenOffice.

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.AerChemMIP.HAMMOZ-Consortium.MPI-ESM-1-2-HAM' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MPI-ESM1.2-HAM climate model, released in 2017, includes the following components: aerosol: HAM2.3, atmos: ECHAM6.3 (spectral T63; 192 x 96 longitude/latitude; 47 levels; top level 0.01 hPa), atmosChem: sulfur chemistry (unnamed), land: JSBACH 3.20, ocean: MPIOM1.63 (bipolar GR1.5, approximately 1.5deg; 256 x 220 longitude/latitude; 40 levels; top grid cell 0-12 m), ocnBgchem: HAMOCC6, seaIce: unnamed (thermodynamic (Semtner zero-layer) dynamic (Hibler 79) sea ice model). The model was run by the ETH Zurich, Switzerland; Max Planck Institut fur Meteorologie, Germany; Forschungszentrum Julich, Germany; University of Oxford, UK; Finnish Meteorological Institute, Finland; Leibniz Institute for Tropospheric Research, Germany; Center for Climate Systems Modeling (C2SM) at ETH Zurich, Switzerland (HAMMOZ-Consortium) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, ocean: 250 km, ocnBgchem: 250 km, seaIce: 250 km.

Chlorophyll-a concentration (Chla) is recognized as an essential climate variable and is one of the primary parameters of ocean-color satellite products. Ocean-color missions have accumulated continuous Chla data for over two decades since the launch of SeaWiFS in 1997. However, the on-orbit life of a single mission is about five to ten years. To build a dataset with a time span long enough to serve as a climate data record (CDR), it is necessary to merge the Chla data from multiple sensors. The European Space Agency has developed two sets of merged Chla products, namely GlobColour and OC-CCI, which have been widely used. Nonetheless, issues remain in the long-term trend analysis of these two datasets because the intermission differences in Chla have not been completely corrected. To obtain more accurate Chla trends in the global and various oceans, we produced a new dataset by merging Chla records from the Sea-viewing Wide Field-of-view Sensor, Medium-spectral Resolution Imaging Spectrometer, Moderate Resolution Imaging Spectroradiometer, Visible Infrared Imaging Radiometer Suite, and Ocean and Land Colour Instrument with intermission differences corrected in this work. The fitness of the dataset as a CDR was validated by using in situ Chla and comparing the trend estimates to the multi-annual variability of different satellite Chla records. We are sorry that the data for November 2002 was missing in this upload, and we will fix it in the very next version. If you need it, please kindly contact us at yushujie@sio.org.cn.

Conventional analyses suggest the metabolism of heterotrophs is thermally more sensitive than that of autotrophs, implying that warming leads to pronounced trophodynamic imbalances. However, these analyses inappropriately combine within- and across-taxa trends. We present a novel mathematic framework to separate these, revealing that the higher temperature sensitivity of heterotrophs is mainly caused by within-taxa responses which account for 92% of the difference between autotrophic and heterotrophic protists. This dataset contains both the datasets and R codes of per capita growth rates of autotrophic and heterotrophic protists as well as heterotrophic bacteria and insects. The datasets of per capita growth rates against temperature were compiled from the literature. Experimental data were included if they met the following criteria: at least 3 data points with positive growth rate (µ) and at least 2 unique temperatures at which positive µ were measured. To calculate apparent activation energy, we also removed data points with nonpositive µ and those with temperatures above the optimal growth temperature (defined as the temperature corresponding to the maximal µ). We use the free software R (version 4.2.0) with R packages (foreach, nlme, plyr, dplyr) to analyse these datasets. R codes are also provided.

Survey used and data gathered for research into adoption of carbon management strategies amongst universities 2022, which forms part of a PhD thesis and will be submitted for publication in a journal.

Project: IPCC Data Distribution Centre : Supplementary data sets for the Sixth Assessment Report - For the Sixth Assessment Report of the IPCC (AR6) input/source and intermediate datasets underlying the AR6 were collected and long-term archived. This project compliments CMIP6 data subset and snapshot analyzed for the WGI AR6. Summary: This data set contains detailed elements the sea level projections associated with the Intergovernmental Panel on Climate Change Sixth Assessment Report. In particular, it contains relative sea level projections that exclude the background term (representing primarily land subsidence or uplift). It includes probability distributions for all the workflows described in AR6 WGI 9.6.3.2. P-boxes derived from these distributions are available in the sister entry 'IPCC-DDC_AR6_Sup_PBox'. These data may be of use for users who want to substitute their own estimates of the background term. Regional projections can also be accessed through the NASA/IPCC Sea Level Projections Tool at https://sealevel.nasa.gov/ipcc-ar6-sea-level-projection-tool. See https://zenodo.org/communities/ipcc-ar6-sea-level-projections for additional related data sets.

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.ScenarioMIP.MOHC.UKESM1-0-LL.ssp245' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The UKESM1.0-N96ORCA1 climate model, released in 2018, includes the following components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), atmosChem: UKCA-StratTrop, land: JULES-ES-1.0, ocean: NEMO-HadGEM3-GO6.0 (eORCA1 tripolar primarily 1 deg with meridional refinement down to 1/3 degree in the tropics; 360 x 330 longitude/latitude; 75 levels; top grid cell 0-1 m), ocnBgchem: MEDUSA2, seaIce: CICE-HadGEM3-GSI8 (eORCA1 tripolar primarily 1 deg; 360 x 330 longitude/latitude). The model was run by the Met Office Hadley Centre, Fitzroy Road, Exeter, Devon, EX1 3PB, UK (MOHC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, ocean: 100 km, ocnBgchem: 100 km, seaIce: 100 km.