• Energy Research
• 12. Responsible consumption close
• GB close
• NL close

Biomass is a sustainable energy source which, through thermo-chemical processes of biomass gasification, is able to be converted from a solid biomass fuel into a gas mixture, known as syngas or biosyngas. A solid oxide fuel cell (SOFC) is a power generation device that directly converts the chemical energy of a fuel to electricity. Therefore, biomass-powered SOFCs could be highly efficient. Typically, in addition to carbon dioxide and water vapor, the major components of syngas produced from biomass gasification include hydrogen, carbon monoxide and methane which are potential fuels for SOFCs, which make integration possible between SOFCs and biomass gasifiers. However, the syngas is also comprised of trace species such as tars, H2S, HCl, and alkali compounds, among others, which could be detrimental to SOFCs if they are contained within the feeding syngas stream. Therefore, the syngas must be pretreated in order to reduce these trace species to a level that SOFCs are able to tolerate. With various gas treatments, the overall system performance would fluctuate, and therefore, the influence of the gas treatment methods on the system performance must be understood. The most prominent among the trace species is tar. The effect of tars on the performance of SOFCs has yet to be studied, however, it is known that, even though tar can possibly poison the fuel cell through carbon deposition, it may also become a fuel for SOFCs. Furthermore, SOFC systems are currently designed in general for employing natural gas. Due to the fact that SOFC systems are very sensitive to the fuel types, it is necessary to completely understand the system response when switching from natural gas to biosyngas to enable a better controllability for future experiments. The research scope of this thesis is limited to the aforementioned issues. The objective of this thesis is to provide a fundamental study to ensure a safe and efficient system integration. The study is limited to an existing downdraft fixed-bed gasifier and a 5 kWe SOFC CHP system due to these two units entering the commercial market. The approach utilized, however, could be further adopted for the large scale power plants based on biomass gasifiers and SOFCs. The research begins with the evaluation of technologies involved biomass-powered SOFCs in chapter 2. Technologies regarding biomass gasification, gas cleanup and fuel cells are discussed based on literature surveys. The review begins by briefly summarizing conventional gasifiers including fixed-bed and fluidized bed gasifiers, which are implented for biomass gasification. Following that, details are indicated for SOFC performance affected by the trace species such as particulates, H2S and available cleaning technologies. The combination of biomass gasifiers with fuel cells including proton exchange membrane fuel cells (PEMFC), molten carbonate fuel cells (MCFC), and SOFCs is then reviewed with an emphasis on the development of SOFC technology and the study of integration between biomass gaisifers and SOFCs. Chapter 3 presents a thermodynamic study of the influence of cleaning technology on the energetic and exergetic performance of the integrated gasifier–SOFC system with distinctive system configurations. Two gas cleaning systems, specifically, a combined high and low temperature gas cleaning system and a high temperature gas cleaning system are considered to connect the gasifier with the SOFC system. The influence of the steam addition for the suppression of carbon deposition and various heat sources for steam generation on the system performance is evaluated. The performance of the SOFC system operating with natural gas and biosyngas is also compared. The installed SOFC system, particularly the embedded pre-reformer and anode off-gas recirculation was initially designed for natural gas. This design is desirable as it effectively uses the steam in the anode off-gas and the heat generated in the stack. As SOFC performance is very sensitive to gas composition and operating conditions, both of which are affected by the anode recirculation, an evaluation of the recirculation behavior on safety issues regarding carbon deposition and nickel oxidation and system performance are presented in chapter 4. An important finding is that, by not implementing the recirculation, the biosyngas-fueled SOFC system effectuates a much higher net electrical efficiency, less initial investment and simpler system configuration in comparison to that when recirculation is implemented. Tolerance of SOFCs to the trace species from biomass gasification is not yet fully understood. The influence of biomass gasification tars on SOFC performance and mitigation of carbon deposition are experimentally evaluated in chapter 5&6. Well-controlled operational conditions assist in the suppression of carbon deposition. Chapter 5 presents the influence of operating conditions including steam levels, current density and time on stream on the performance of SOFCs with Ni–YSZ anodes fueled by tar-containing biosyngas at 800 °C. Changes in impedance spectra and polarization curves of SOFCs following tar exposure were analyzed to assess the cell performance. The biosyngas composition and the tar concentration employed in these measurements were identical to those measured from the commercial air-blown biomass gasifier that is to be connected to the studied SOFC system. Operating this type of SOFC with the tar concentrations could result in severe damage to the cell due to carbon formation on the anodes. Scanning Electron Microscopy (SEM) indicated carbon deposition which affected the performance of the SOFC, as is exhibited by the impedance spectra and anode polarization curves of the cells after exposure to tars. However, the risk of carbon deposition could be alleviated by increasing steam levels and current loads. Chapter 6 presents a similar study of the effects of tar on SOFC performance, but possesses a focus on Ni–GDC anodes and various operating temperatures levels (700, 800 and 900 °C) under both dry and wet conditions. Polarization behavior, electrochemical impedance spectroscopy, and cell voltage degradation were analyzed to evaluate the cell performance. It is most likely that the cells with Ni–GDC anodes did not suffer from carbon deposition under the wet conditions studied. Dry tar-containing syngas for SOFCs is unlikely to cause carbon formation under a mild current load; however, it may induce carbon formation at open circuit. The effect of carbon dioxide that is capable of suppressing carbon deposition was experimentally investigated, and an enhanced performance was observed under the conditions studied. Under carbon risk-free operating conditions, the cell voltage increases when raising the feeding tar concentration, indicating that tar performs as fuel for SOFCs. Numerical simulation is an efficient tool for the evaluation of SOFCs’ response when switching fuels. Chapter 7 presents such a numerical study with the focus on the evaluation of kinetic models for methane steam reforming for SOFCs operation with multiple fuels. Three frequently employed kinetic models were selected in order to examine their impacts on the performance of a tubular SOFC. The resulting thermo-electrochemical behaviors derived from these models were compared. It was discovered that all three kinetic models are reasonably accurate in terms of the polarization behavior, but they significantly affected the local thermo-electrochemical performance. A more rapid kinetic model was adopted based on the evaluation of these three kinetic models in order to evaluate the performance of the tubular SOFC in terms of local electrochemical performance, anode oxygen partial pressure and overall SOFC performance when performing with multiple fuels. Chapter 8 draws the conclusions regarding the work presented in this dissertation, and recommendations are suggested for future research activities.

Abstract The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK–Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

SummaryMicrobially generated or supported nanocatalysts have potential applications in green chemistry and environmental application. However, precious (and base) metals biorefined from wastes may be useful for making cheap, low‐grade catalysts for clean energy production. The concept of bionanomaterials for energy applications is reviewed with respect to potential fuel cell applications, bio‐catalytic upgrading of oils and manufacturing ‘drop‐in fuel’ precursors. Cheap, effective biomaterials would facilitate progress towards dual development goals of sustainable consumption and production patterns and help to ensure access to affordable, reliable, sustainable and modern energy.

Biomethane production from processed industrial food waste (IFW) in admixture with sewage sludge (primary and waste activated sludge: PS and WAS) was evaluated at a range of C:N ratios using a standard biochemical methane potential (BMP) test. IFW alone had a C:N of 30 whereas for WAS it was 5.4 and thus the C:N ratio of the blends fell in that range. Increasing the IFW content in mix improves the methane potential by increasing both the cumulative biogas production and the rate of methane production. Optimum methane yield 239 mL/g VSremoved occurred at a C:N ratio of 15 which was achieved with a blend containing 11 percent (w/w) IFW. As the fraction of IFW in the blend increased, volatile solids (VS) destruction was increased and this led to a reduction in methane yield and amount of production. The highest destruction of volatile solids of 93 percent was achieved at C:N of 20 followed by C:N 30 and 15. A shortened BMP test is adequate for evaluating optimum admixtures.

Owing to the complexity of the sector, industrial activities are often represented with limited technological resolution in integrated energy system models. In this study, we enriched the technological description of industrial activities in the integrated energy system analysis optimisation (IESA-Opt) model, a peer-reviewed energy system optimisation model that can simultaneously provide optimal capacity planning for the hourly operation of all integrated sectors. We used this enriched model to analyse the industrial decarbonisation of the Netherlands for four key activities: high-value chemicals, hydrocarbons, ammonia, and steel production. The analyses performed comprised 1) exploring optimality in a reference scenario; 2) exploring the feasibility and implications of four extreme industrial cases with different technological archetypes, namely a bio-based industry, a hydrogen-based industry, a fully electrified industry, and retrofitting of current assets into carbon capture utilisation and storage; and 3) performing sensitivity analyses on key topics such as imported biomass, hydrogen, and natural gas prices, carbon storage potentials, technological learning, and the demand for olefins. The results of this study show that it is feasible for the energy system to have a fully bio-based, hydrogen-based, fully electrified, and retrofitted industry to achieve full decarbonisation while allowing for an optimal technological mix to yield at least a 10% cheaper transition. We also show that owing to the high predominance of the fuel component in the levelled cost of industrial products, substantial reductions in overnight investment costs of green technologies have a limited effect on their adoption. Finally, we reveal that based on the current (2022) energy prices, the energy transition is cost-effective, and fossil fuels can be fully displaced from industry and the national mix by 2050.

SummaryEnvironmentally extended multiregional input‐output (EE MRIO) tables have emerged as a key framework to provide a comprehensive description of the global economy and analyze its effects on the environment. Of the available EE MRIO databases, EXIOBASE stands out as a database compatible with the System of Environmental‐Economic Accounting (SEEA) with a high sectorial detail matched with multiple social and environmental satellite accounts. In this paper, we present the latest developments realized with EXIOBASE 3—a time series of EE MRIO tables ranging from 1995 to 2011 for 44 countries (28 EU member plus 16 major economies) and five rest of the world regions. EXIOBASE 3 builds upon the previous versions of EXIOBASE by using rectangular supply‐use tables (SUTs) in a 163 industry by 200 products classification as the main building blocks. In order to capture structural changes, economic developments, as reported by national statistical agencies, were imposed on the available, disaggregated SUTs from EXIOBASE 2. These initial estimates were further refined by incorporating detailed data on energy, agricultural production, resource extraction, and bilateral trade. EXIOBASE 3 inherits the high level of environmental stressor detail from its precursor, with further improvement in the level of detail for resource extraction. To account for the expansion of the European Union (EU), EXIOBASE 3 was developed with the full EU28 country set (including the new member state Croatia). EXIOBASE 3 provides a unique tool for analyzing the dynamics of environmental pressures of economic activities over time.

Results-based financing (RBF) programmes in the clean cooking sector have gained increasing donor interest over the last decade. Although the risks and advantages of RBF have been discussed quite extensively for other sectors, especially health services, there is limited research-documented experience of its application to clean cooking. Due to the sheer scale of the important transition from ‘dirty’ to clean cooking for the 4 billion people who lack access, especially in the Global South, efficient and performance-proven solutions are urgently required. This paper, undertaken as part of the work of the UKAid-funded Modern Energy Cooking Services (MECS) programme, aims to close an important research gap by reviewing evidence-based support mechanisms and documenting essential experiences from previous and ongoing RBF programmes in the clean cooking and other sectors. On this basis, the paper derives key strategic implications and learning lessons for the global scaling of RBF programmes and finds that qualitative key performance indicators such as consumer acceptance as well as longer-term monitoring are critical long-term success factors for RBF to ensure the continued uptake and use of clean cooking solutions (CCS), however securing the inclusion of these indicators within programmes remains challenging. Finally, by discussing the opportunities for the evolution of RBF into broader impact funding programmes and the integration of energy access and clean cooking strategies through multi-sector approaches, the paper illustrates potential steps to enhance the impact of RBF in this sector in the future.