• Energy Research
• Closed Access close
• Restricted close
• Embargo close
• natural sciences close
• GB close
• RU close

Abstract An orange and an apple juice each containing 250–385 ppm tin were under suspicion of having caused an outbreak of food poisoning in Kuwait in 1967 but did not cause any toxic signs when fed to pigeons, cats and dogs. One cat out of 11 vomited when fed an orange juice containing 540 ppm tin derived from the container, and with juices containing 1370 ppm tin, 20–30% of the cats vomited but none of the dogs was affected. Fruit juices containing 2000 ppm tin caused vomiting in up to 40% of the cats. Modification of orange juices with a high tin content by addition of nitrate or ethanol or by adjustment of the pH from 3 to 6 did not affect the incidence of vomiting. No toxic signs were produced in rats given fruit juices containing added tin salts up to a level of 995 ppm or in rats and cats given aqueous solutions of tin salts (up to 1200 ppm tin) in citric acid. Solid foods containing tin derived from the containers up to the highest level obtainable (470 ppm) had no toxic effect when fed to dogs and cats. Five human volunteers showed no toxic signs after drinking fruit juices containing 498, 540 or 730 ppm tin derived from the containers, but all five had some gastro-intestinal disturbance after drinking a fruit juice containing 1370 ppm tin. A repeat experiment with the latter juice had no effect in four of the volunteers and only mild symptoms in the fifth. In rats and cats, there was no evidence of tin absorption 24 hr after ingestion of fruit juices containing high levels of tin. No tin was recovered from the urine and in the rats 99% was recovered from the faeces. Only minute amounts of tin could be found in the body, apart from the alimentary tract, of a rat that had been given orange juice with a high tin content ad lib. instead of drinking water for 7 days. It is concluded that toxic signs follow the drinking of tin-containing fruit juices by man and cats only with tin levels of approximately 1400 ppm and above, that there is no evidence from these experiments that toxicity is due to the absorption of tin and that the most likely cause is local irritation of the mucous membrane of the alimentary tract.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

This study builds a holistic, transparent life cycle assessment model of a variety of aqueous mineral carbonation processes using a hybrid process model and economic input–output life cycle assessment approach (hybrid EIO-LCA). The model allows for the evaluation of the tradeoffs between different reaction enhancement processes while considering the larger lifecycle impacts on energy use and material consumption. A preliminary systematic investigation of the tradeoffs inherent in mineral carbonation processes is conducted to provide guidance for the optimization of the life-cycle energy efficiency of various proposed mineral carbonation processes. The life-cycle assessment of aqueous mineral carbonation suggests that a variety of alkalinity sources and process configurations are capable of net CO2 reductions. The total CO2 storage potential for the alkalinity sources considered in the U.S. ranges from 1.8% to 23.7% of U.S. CO2 emissions, depending on the assumed availability of natural alkalinity sources and efficiency of the mineral carbonation processes.

Abstract Steady-state free and forced convective cooling of vertical, rectangular, 3 mm thick, 250 mm long fins, uniformly separated and protruding vertically upwards from a 250 mm × 190 mm isothermal horizontal base was investigated. For each combination of specified fin protrusion, horizontal forced air flow-rate in the direction along the fins and fin base temperature, the optimal fin spacing—corresponding to the maximum rate of heat loss—has been deduced. As the fin protrusion of the heat exchanger increases, this optimal value rises significantly in forced convection conditions, but declines slightly in the presence of free convection alone. The temperature distributions over the fins' surfaces were also studied, when the fin base was maintained at constant temperatures of either 40°C, 60°C or 80°C above that of the ambient environment. Large temperature depressions occurred near the leading edges and tips of the fins in forced convection, whereas much nearer isothermal temperature distributions were present under free convection conditions.

Phosphogypsum (PG) is the solid waste product of phosphate fertilizer production and is characterized by high concentrations of salts, heavy metals, and certain natural radionuclides. The work reported in this paper examined the influence of PG amendment on soil physicochemical proprieties, along with its potential impact on several physiological traits of sunflower seedlings grown under controlled conditions. Sunflower seedlings were grown on agricultural soil substrates amended with PG at rates of 0, 2.5, and 5 %. The pH of the soil decreased but electrical conductivity and organic matter, calcium, phosphorus, sodium, and heavy metal contents increased in proportion to PG concentration. In contrast, no variations were observed in magnesium content and small increases were recorded in potassium content. The effects of PG on sunflower growth, leaf chlorophyll content, nutritional status, osmotic regulator content, heavy metal accumulation, and antioxidative enzymes were investigated. Concentrations of trace elements in sunflower seedlings grown in PG-amended soil were considerably lower than ranges considered phytotoxic for vascular plants. The 5 % PG dose inhibited shoot extension and accumulation of biomass and caused a decline in total protein content. However, chlorophyll, lipid peroxidation, proline and sugar contents, and activities of antioxidant enzymes such as superoxide dismutase and catalase increased. Collectively, these results strongly support the hypothesis that enzymatic antioxidation capacity is an important mechanism in tolerance of PG salinity in sunflower seedlings.

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

AbstractReview: 105 refs.

Abstract The four different techniques which were used to test an advanced, four-pane glazing system and standard double-glazed unit are described. The results from each test are compared. Where agreement is not good, explanations are suggested. The advanced glazing system was found to have a U -value of 0.9 W/m 2 K and a shading coefficient of 0.48. The glazing simulation models WINDOW (Lawrence Berkeley Laboratories, Berkeley, CA, U.S.) and MULTB (Pilkington Glass, U.K.) were used to predict glazing performance. Simulation of the two glazing systems which were experimentally assessed allows comparison between models, and between predicted and measured performance. Agreement was within the error bands associated with each assessment.