• Energy Research
• Restricted close
• 12. Responsible consumption close
• 2. Zero hunger close
• 1. No poverty close
• GB close

Using 40-year experiment data from a mono-modal rainfall area of northern Togo, we analyzed soil fertility dynamics when 2 and 3-year fallows were alternated with 3-year rotation of groundnut, cotton and sorghum. The control treatment consisted to continuous cultivate the soil in a rotation of groundnut/cotton/sorghum without fallow periods. For each rotation, two fertilisation rates were applied: no fertilisation and mineral fertiliser application during the cropping and/or the fallow periods. Yields of unfertilised crops, which averaged 1 t ha-1 during the first years of cultivation, were often nil in the long-term. In the long-term, yields of fertilised cotton and sorghum decreased by 32 and 50 %, respectively compared to the average of 2.4 and 1.6 t ha-1 obtained during the first decade of cultivation. The long-term decline in crop productivity was mitigated when fallow periods were alternated with cropping periods, and consequently there was partial compensation in terms of production for the unproductive fallowed plots. Long-term yields of fertilised cotton and sorghum in the periodically fallowed plots were 40 and 50 % higher than those in continuously cropped plots, respectively; they were 90 and 60 % higher than those in continuously cropped plots without fertilisation. Like for crop productivity, soil C, N and exchangeable Ca and Mg decreased less in periodically fallowed plots than in continuously cropped plots. The limited soil C decline when fallows were alternated with crops appears to be the consequence of no-tillage period rather than the effect of the highest C inputs to the soil.

Great efforts have been paid to improve engine efficiency as well as to reduce the pollutant emissions. The direct injection allows to improve the engine efficiency; on the other hand, the GDI combustion produces larger particle emissions. The properties of fuels play an important role both on engine performance and pollutant emissions. In particular, great attention was paid to the octane number. Oxygenated compounds allow increasing gasoline's octane number and play an important role in PM emission reduction. In this study was analyzed the effect of fuels with different RON and with ethanol and ethers content. The analysis was performed on a small GDI engine. Two operating conditions, representative of the typical EUDC cycle, were investigated. Both the engine performance and the exhaust emissions were evaluated. The gaseous emissions and particle concentration were measured at the exhaust by means of conventional instruments. Particle size distribution function was measured in the range from 5.6 nm to 560 nm by means of an Engine Exhaust Particle Sizer (EEPS). The results point out that the better result in terms of performance and emission reduction was observed for the high RON fuel. The fuels with ethanol as additive show a large fuel consumption and a not valuable effect on exhaust emissions

AbstractProjections show that biomass will remain important for reaching future EU renewable energy targets. In addition to using domestic biomass, European bioenergy markets will also partly rely on imports of biomass, in particular in trade‐oriented EU member states like the United Kingdom, the Netherlands, Belgium, and Denmark. There has been a lot of debate on the sustainability of (imported) biomass and how policy should deal with this. In this research, therefore, we defined long‐term strategies for sustainable biomass imports in European bioenergy markets. We used the input of different stakeholders in our approach through focus‐group discussions and a global survey, focusing on the following aspects: key principles of sustainable biomass trade, risks and opportunities of biomass trade, both for import regions (EU countries) and for sourcing regions, and practical barriers for trade. Overall we conclude that policies should be stable and consistent within a long‐term vision. An overall sustainability assurance framework of biomass production and use is key, but should ultimately apply to all end uses of biomass. Furthermore, the mobilization of biomass should be supported, as well as commoditization, considering the large diversity of biomass. Side impacts of biomass use should be monitored. Reducing investors’ risk perception is crucial for future developments in the biobased economy, and a clear policy to phase out fossil fuels, e.g. through a carbon tax, needs to be implemented. The results of this research are of interest for policy makers when deciding on long‐term strategies concerning sustainable bioenergy markets. © 2018 Society of Chemical Industry and John Wiley & Sons, Ltd

Current economic instruments aimed at climate change mitigation focus mainly on CO(2) emissions, but efficient climate mitigation needs to focus on other greenhouse gases as well as CO(2). This study investigates the distributional effects of climate change taxes on households belonging to different income and lifestyle groups; and it compares the effects of a CO(2) tax with a multiple GHG tax in the UK in terms of cost efficiency and distributional effects. Results show that a multi GHG tax is more efficient than a CO(2) tax due to lower marginal abatement costs, and that both taxes are regressive, with lower income households paying a relatively larger share of their income for the taxes than higher income households. A shift from a CO(2) tax to a GHG tax will reduce and shift the tax burden between consumption categories such as from energy-intensive products to food products. Consumers have different abilities to respond to the tax and change their behavior due to their own socio-economic attributes as well as the physical environment such as the age of the housing stock, location, and the availability of infrastructure. The housing-related carbon emissions are the largest component of the CO(2) tax payments for low income groups and arguments could be made for compensation of income losses and reduction of fuel poverty through further government intervention.

We analysed the effect of applying Dutch thermal efficiency standards of residential dwellings, conversion efficiency, appliance fuel mixes and appliance ownership rates, to the UK residential sector. We found that although aggregate energy consumption does not change significantly, pollution emissions are reduced significantly. Thus, the primary difference between housing and appliance stocks in the two regions is in terms of fuel mixes. However, improved thermal efficiency does allow for increased dwelling warmth without increasing emissions. Adapting Dutch standards in the UK would lead to a one-time improvement of the environmental situation, after which the trend is continued.

While park-people conflicts have received worldwide attention, the extent of illegal resource extraction and the relationship with communities' livelihoods has gained little attention in the literature. Thus this paper investigates the impact of socio-economic factors involved in illegal fuel wood and fodder extraction at Bardia National Park in Nepal. Household questionnaires, key-informant interviews and focus groups were conducted to identify different plant species used by households and explore the causes and mode of resource extraction in three buffer zone villages in the park. Altogether 50 different plants were identified by villagers that were used regularly for different livelihood purposes. Almost half of the respondents met their needs by illegally and regularly extracting resources from the park. Incentive schemes in the form of development projects were important but not sufficient in meeting the basic needs of households' especially for such daily items such as fuel wood and fodder. The results described in this paper showed that proximity and access to resources either in the national park, the buffer zone community forest or the government forest, and impact on the livelihoods significantly influenced the likelihood of illegal resource extraction activities. Villages that differed in terms of their location to the resource base, the provision of alternative resources and influence of these on their livelihoods showed significant differences in terms of their patterns of resource extraction and use of these resources. As resource use options, resource interest, and resource extraction patterns were different between villages and dependent on circumstances specific to villages, site-specific management strategies were necessary and more influential than the enforcement of 'one-size fits all' policies. It is suggested that park management plans should be flexible and adaptive enough to meet site-specific contexts and to endear wider support from local communities.

This paper provides a review of the literature that applies the life cycle assessment (LCA) methodology to the assessment of the environmental performance of the life cycle of construction and demolition waste (CDW) management systems. This article is focused on generating a general mapping of the literature and on identifying the best practices in compliance with LCA framework and proposing directions for future LCA studies in this field. The temporal evolution of the research in this field and the aim of the studies have grown in parallel with the legal framework related to waste and energy efficiency of buildings. Most studies have been published in Europe, followed by USA. Asia and Australia, being at an incipient application stage to the rest of the world. Topics related to "LCA of buildings, including their EoL" and "LCA of general CDW management strategies" are the most frequently analysed, followed by "LCA of EoL of construction elements" and "LCA of natural material vs recycled material". Regarding the strategies, recycling off-site and incineration, both combined with landfill for the rejected fractions, are the most commonly applied. Re-use or recycling on-site is the strategy least applied. The key aspect when LCA is applied to evaluate CDW management systems is the need to normalise which processes to include in the system boundary and the functional unit, the use of inventory data adapted to the context of the case study and the definition of a common set of appropriate impact assessment categories. Also, it is important to obtain results disaggregated by unit processes. This will allow the comparison between case studies.

Storage capacity is a key aspect when validating potential CO2 sequestration sites. Most CO2 storage projects, for obvious reasons, target conventional aquifers (e.g., saline aquifers, depleted hydrocarbon fields) with good reservoir properties and ample subsurface data. However, non-geological factors, such as proximity to the CO2 source, may require storing CO2 in geologically “less-than-ideal” sites. We here present a first-order CO2 storage resource estimate of such an unconventional storage unit, a naturally fractured, compartmentalized and underpressured siliciclastic aquifer located at 670–1,000 m below Longyearbyen, Arctic Norway. Water injection tests confirm the injectivity of the reservoir. Capacity calculations, based on the US DOE guidelines for CO2 storage resource estimation, were implemented in a stochastic volumetric workflow. All available data were used to specify input parameters and their probability distributions. The areal extent of the compartmentalized reservoir is poorly constrained, encouraging a scenario-based approach. Other high-impact parameters influencing storage resource estimates include CO2 saturation, CO2 density and the storage efficiency factor. The hydrodynamic effects of storing CO2 in a compartmentalized aquifer are accounted for by calculating probable storage efficiency factors (0.04–0.79 %) in a fully closed system. The results are ultimately linked to the chosen scenario, with two orders of magnitude difference between scenarios. The fracture network contributes with up to 2 % to the final volumes. The derived workflow validates CO2 storage sites based on initial feasibility assessments, and may be applied to aid decision making at other unconventional CO2 storage sites with significant data uncertainty.

Central solar heating plants with seasonal storage (CSHPSS) are among the most promising technologies to save energy in the industrial and residential-commercial building sectors. This work introduces a systematic approach to optimize these systems according to economic and environmental criteria. Our method, which combines the TRNSYS 17 simulation software with life cycle assessment and multi-objective optimization, identifies optimal CSHPSS designs for any climatic condition and heating demand profile considering economic and environmental criteria simultaneously. The capabilities of this approach are illustrated through its application to a case study of a CSHPSS located in Barcelona (Spain), which satisfies a heating demand for a neighborhood of 1120 dwellings. Numerical results show that the CSHPSS plant leads to significant environmental and economic improvements compared to the use of a conventional natural gas heating system. Our tool can guide engineers and architects in the transition towards a more sustainable residential sector.

Livestock production in peri-urban areas constitutes an important sub-sector of the agricultural production system in China, and contributes to environmental degradation and local air borne pollution contributing to smog. As a result, local policies are being implemented to safeguard the environment. However, there has been little attempt to quantify the impact of environmental policies on livestock production structure, spatial distribution and their related greenhouse gases (GHGs) and ammonia (NH3) emissions. Here, we calculated the inventories of GHGs and NH3 emissions for 2010 and 2014 for peri-urban livestock production in Beijing, using reliable spatially explicit data, which was collected from 1748 industrial farms in 2010 and 2351 industrial farms in 2014, including pig, dairy, beef cattle, poultry and sheep farms. Our estimates indicated that total industrial livestock production increased by 17% between 2010 and 2014, even under the more strict environmental protection polices, with farm size decreasing by between 7% and 47%. Up to 50% of the industrial livestock farms have remained in operation, with the rest closing down or being moved to other regions. Following this trend, total GHGs emission decreased from 5.0 to 4.5 Tg CO2-eq between 2010 and 2014. Most of the GHGs emission reduction was due to the lowering of energy related carbon dioxide (CO2) emission in 2014. Total NH3 emission decreased from 102 to 96 Gg between 2010 and 2014, mainly due to more stringent environmental regulations for new and extended farms (increased in farm size), e.g. Discharge standard for pollutants for livestock and poultry breeding. Our study identified that GHGs and NH3 emission hotspots were concentrated in suburban areas (around the city centre and with less agricultural resource and population density) in 2010. However, between 2010 and 2014 these hotspots moved to the exurban plain and mountain area following the closure or sub-division of intensive farms in suburban regions and construction of new and small farms in exurban areas (around the suburban and with more agricultural resource and lower population density). Scenario analysis suggests that total GHGs emission can be reduced by up to 1.0 Tg CO2-eq (23% of total livestock sector emissions) in Beijing, using a combination of modifications of farm type, livestock diet and manure management. The integrated scenario can reduce CH4, N2O and NH3 emissions by 27%, 9% and 35%, compared to the reference scenario. Within this short period of time (5 years), policies have had direct impacts on peri-urban livestock production in Beijing, resulting in marked changes in the structure of different livestock sectors, as well as the GHGs and NH3 emission inventories and their spatial distribution. Our analysis clearly shows that the success of these (and future) polices relies on optimizing spatial management of new livestock production systems. Policy and farmer guidance should focus on optimizing livestock diet and on-farm manure management, industrial production systems and the pig and poultry sectors in peri-urban regions.