• Energy Research
• IN close
• GB close
• AU close
• Solar Energy close

Abstract Thermal performance of three naturally ventilated public buildings in which the wind tower is an important architectural freature is studied. One of the three builidings as well as it's wind tower is instrumented for temperature, relative humidity and airflow velocity measurements, and the other two are instrumented for temperature measurement. The results have led to a discussion concerning the degree of wind tower effectiveness in achieving thermal comfort.

Abstract An electrochemical conversion technique has been developed to deposit selective black nickel coatings of solar absorptance 0.90–0.94 and thermal emittance (at 100°C) 0.08–0.15 on galvanized iron, zincated, and zinc electroplated aluminium surfaces. The effect of electrochemical conversion parameters on the microstructure, optical and thermal properties and durability of the coatings has been established.

The impact of ceiling geometries on the performance of lightshelves was investigated using physical model experiments and radiance simulations. Illuminance level and distribution uniformity were assessed for a working plane in a large space located in sub-tropical climate regions where innovative systems for daylighting and shading are required. It was found that the performance of the lightshelf can be improved by changing the ceiling geometry; the illuminance level increased in the rear of the room and decreased in the front near the window compared to rooms having conventional horizontal ceilings. Moreover, greater uniformity was achieved throughout the room as a result of reducing the difference in the illuminance level between the front and rear of the room. Radiance simulation results were found to be in good agreement with physical model data obtained under a clear sky and high solar radiation. The best ceiling shape was found to be one that is curved in the front and rear of the room.

Abstract A new method of tracking the maximum power point (MPP) of a photovoltaic (PV) module exploiting the effects of the inherent characteristic resistances of the photovoltaic cells is proposed in this paper. An analysis of the mathematical model of the IV characteristic of the PV module revealed a possibility of estimating the MPP from its characteristic parameters such as the open circuit voltage (Voc), short circuit current (Isc), series resistance (Rse) and the shunt resistance (Rsh). The first stage of estimation process, for obtaining the voltage at the MPP, was facilitated by the effects of the series and shunt resistance on the IV characteristic of the PV module and the second stage of estimation process was facilitated by the combined process of the first stage of estimation and the condition for extracting the maximum power from the mathematical model of the pv characteristic of the PV module. The estimated voltage at the MPP in the second stage of estimation was found very close to the true MPP. The effectiveness of tracking the MPP with the proposed method has closely matched with the true MPP. This was validated by the results obtained through simulations and experiments. An analysis of the effects of degradation on the performance of the proposed technique showed that the performance was excellent during the first few years and with the update of characteristic resistances in the proposed algorithm the performance was found to be almost invariant. The successful experimental results obtained with a 100 Wp PV module indicate that the technique can be favourably implemented for standalone PV power systems.

Abstract Exergy analysis is very helpful for reducing irreversibility and rising the efficiency of solar collectors. The major objective of the present study is to organize a review on exergy analysis of different parabolic solar collectors. The effects of various flows and geometrical parameters of parabolic thermal collectors on the exergy efficiency were presented and discussed. In addition, comparative study was carried out to select the best solar thermal system for maximum exergy efficiency with minimal thermal losses. This study indicated that the hybrid nanofluids enhanced the exergy efficiency significantly as compared to without hybrid nanofluids. Passive techniques comprising twisted tape inserts, fins and insertion of swirl devices in the stream for changing the stream patterns causes to interrupt the thermal boundary layer and accordingly high exergy efficiency. This review would also throw light on the scope for further research and recommendation for improvement in the existing solar thermal collectors. Finally, this work will be beneficial for the scholars working on exergy analyses of solar parabolic collectors.

Abstract The colour rendering index (CRI) and correlated colour temperature (CCT) of transmitted daylight through a DSSC glazing is an essential parameter for building interior space comfort. Six small-scale dye-sensitized solar cells (DSSCs) were fabricated by varying TiO2 electrode thickness, which offered luminous transmittance between 0.19 and 0.53. Below 0.5 transmittance, the CRI for this TiO2 electrode based DSSC glazing was less than 80. A strong linear correlation was found between CCT and CRI. The CRI of 53% transparent DSSC glazing had only 2.7% lower CRI than 77% transparent double glazing and 72% transparent vacuum glazing.

Copper indium diselenide (CuInSe2) compound was synthesized by reacting its constituent’s elements copper, indium and selenium in near stoichiometric proportions (i.e. 1:1:2 with 5% excess selenium) in an evacuated quartz ampoule. Synthesized pulverized compound material was used as an evaporant material to deposit thin films of CuInSe2 onto organically cleaned sodalime glass substrates, held at different temperatures (300–573 K), by means of single source thermal evaporation method. The phase structure and the composition of chemical constituents present in the synthesized compound and thin films have been investigated using X-ray diffraction and energy dispersive X-ray analysis, respectively. The investigations show that CuInSe2 thin films grown above 423 K are single phase, having preferred orientation of grains along the (112) direction, and having near stoichiometric composition of elements. The surface morphology of CuInSe2 films, deposited at different substrate temperatures, has been studied using the atomic force microscopy to estimate its surface roughness. An analysis of the transmission spectra of CuInSe2 films, recorded in the wavelength range of 500–1500 nm, revealed that the optical absorption coefficient and the energy band gap for CuInSe2 films, deposited at different substrate temperatures, are ∼104 cm−1 and 1.01–1.06 eV, respectively. The transmission spectrum was analyzed using iterative method to calculate the refractive index and the extinction coefficient of CuInSe2 thin film deposited at 523 K. The Hall effect measurements and the temperature dependence of the electrical conductivity of CuInSe2 thin films, deposited at different substrate temperatures, revealed that the films had electrical resistivity in the range of 0.15–20 ohm cm, and the activation energy 82–42 meV, both being influenced by the substrate temperature.