• Energy Research
• 7. Clean energy close
• 13. Climate action close
• IN close
• AU close

Abstract Integration of solar photovoltaic (PV) and battery storage systems is an upward trend for residential sector to achieve major targets like minimizing the electricity bill, grid dependency, emission and so forth. In recent years, there has been a rapid deployment of PV and battery installation in residential sector. In this regard, optimal planning of PV-battery systems is a critical issue for the designers, consumers, and network operators due to high number of parameters that can affect the optimization problem. This paper aims to present a comprehensive and critical review on the effective parameters in optimal planning process of solar PV and battery storage system for grid-connected residential sector. The key parameters in process of optimal planning for PV-battery system are recognized and explained. These parameters are economic and technical data, objective functions, energy management systems, design constraints, optimization algorithms, and electricity pricing programs. A timely review on the state-of-the-art studies in PV-battery optimal planning is presented. The challenges, trends and latest developments in the topic are discussed. At the end, scopes for future studies are developed. It is found that new guidelines should be provided for the customers based on various electricity rates and demand response programs. Also, several design considerations like grid dependency and resiliency need further investigation in the optimal planning of PV-battery systems.

Abstract Hybrid nanofluids are a novel class of colloidal fluids which have drawn significant attention due to potential tailoring of their thermo-physical properties for heat transfer enhancement by a combination of more than one nano-additive to meet specific requirements of an application. In the present work, ceramic copper oxide/carbon (SiO2-CuO/C) nanoparticles in 80:20 (wt%) composition were prepared by ultrasonic-assisted wet mixing technique. The hybrid nanofluid was formulated by dispersing the nanoparticles into a base fluid mixture of 60:40 (% by mass) glycerol and ethylene glycol (G/EG) using the two-steps method. The influence of nanoparticles on the augmentation of specific heat, thermal conductivity and viscosity was examined in the volume concentration range of 0.5–2.0% in the temperature range of 303.15–353.15 K. The results demonstrate that the synthesized SiO2-CuO/C hybrid nanoparticles enhanced the thermo-physical properties of the base fluid mixture which is higher than using SiO2 alone. In the case of SiO2–G/EG nanofluid, the specific heat capacity decremented by a maximum value of 5.7% whereas the thermal conductivity and viscosity incremented by 6.9% and 1.33-times as compared with G/EG at maximum volume concentration of 2.0% at a temperature of 353.15 K. Comparatively, a reinforcement of 80% SiO2 with 20% CuO/C in G/EG mixture led to thermal conductivity and viscosity enhancement by 26.9% and 1.15-times, respectively with a significant reduction of specific heat by 21.1%. New empirical correlations were proposed based on the experimental data for evaluation of thermophysical properties.

Abstract The upward energy demand, along with the depletion of conventional energy sources, demands improved utilization of renewable energy resources. Among all renewable energy resources, solar energy is the most appropriate alternative to conventional energy sources owing to its inexhaustibility and green property. Solar collectors are devices that convert solar radiation into heat or energy. However, the efficiency of the solar collector is still not adequate. The competent step to enhance the efficiency of the solar collector is to use nanofluids. This study is carried out different phases viz. characterization and stabilization while both qualitative and quantitative methods used to evaluate the stability of nanofluids thermophysical properties of Al2O3 and CNC nanofluids such as thermal conductivity measured at four different temperature using KD2 Pro, viscosity and specific heat determined at similar temperature range by viscometer and differential scanning calorimetry respectively. The experiment is executed with a fixed flow rate and in steady-state conditions under extensive solar radiation. The experimental study has revealed that up to 2.48% and 8.46% efficiency of solar collector enhanced by using 0.5% Al2O3 and 0.5% CNC nanofluids respectively. Moreover, nanofluids show good to moderate stability performance. Besides, the thermal conductivity of nanofluids increased while viscosity is in a decreasing trend with increasing temperature. Nanofluids could enhance the efficiency of a flat-plate solar collector.

Abstract It is well known that Espinosa-parades et al. (Espinosa-Paredes et al., 2011) proposed a fractional neutron point kinetic (FNPK) model with multi-group of delayed neutrons to describe dynamic behavior in a nuclear reactor. In (Aboanber and Nahla, 2016b), Aboanber and Nahla presented an extension of Espinosa-parades et al. FNPK model. This new model is called as the corrected fractional neutron point kinetic (CFNPK) model. The present study is concerned with the numerical solution of the CFNPK model (Aboanber and Nahla, 2016b) with six groups of delayed neutron precursors. The fractional derivative is described in the sense of Grunwald-Letnikov. An implicit finite difference method (FDM) is constructed for the solution of CFNPK model. The stability analysis of the method is carried out. We analyze the results of neutron density for different values of anomalous diffusion order, reactivity function, relaxation time and time step size. In addition, we compare the results corresponding to CFNPK model (Aboanber and Nahla, 2016b) with the results corresponding to the FNPK model proposed by Espinosa-parades et al. (Espinosa-Paredes et al., 2011). It is shown that as anomalous diffusion order decreases or simulation time increases the difference between the values of neutron density increases. We have investigated the effects of each term of the CFNPK.

Co-generation of energy derived from human movement is not new. Intentionally accumulating energy, from mass urban-mobility, provides opportunities to re-purpose power. However, when mass-mobility is predictable, yet not harnessed, this highlights critical gaps in application of interdisciplinary knowledge. This research highlights a novel application of geostatistical modelling for the built environment with the purpose of understanding where energy harvesting infrastructure should be located. The work presented argues that advanced Geostatistical methods can be implemented as an appropriate method to predict probability distribution, density, clustering of populations and mass-population mobility patterns from large-scale online distributed and heterogeneous data sets published by the Australian Urban Research Infrastructure Network. Where clear urban spatio-behavioural relationships of density and movement can be predicted – understanding such patterns supports cross-disciplinary city planning and decision-making. A data-informed – predictive spatial decision-making framework is proposed – facilitating the endeavour of cogenerating kinetic human energy within a prescribed space. This novel proposition could further sustainability strategies for compact living for cities such as in Perth, Western Australia which is increasingly economically and geographically pressured to densify. This research argues that surveillance data elucidate a capacity to interpret and understand impacts of densification strategies, efficacy of CCTV networks in existing and emerging cities.

Cultural perspectives shape responses to climate change. This research examines ‘myths of physical nature’ outlined in cultural theory. Patterns of values and beliefs about the environment are described as ‘cultural biases’, which legitimize four ways of life – worldviews. We test whether cultural biases about the environment have the same structure as those about society. Study 1 details sound psychometric measures developed through a survey of Australians (n = 290). Study 2 replicates the measures (n = 5081), and demonstrates their predictive validity in relation to climate change beliefs and self-reported pro-environmental behaviors. Two negatively correlated dimensions are identified that differ from the grid-group framework. Individualistic and fatalistic perspectives frame the environment as ‘elastic’ to justify damaging behaviors. Hierarchical and egalitarian perspectives frame the environment as ‘ductile’ to justify environmental conservation. Theoretical implications and differences to established measures of environmental concern and worldview are discussed.

The present study utilizes (a) recycled low density polyethylene oil extracted through catalytic pyrolysis and (b) 1-decanol and di-n-butyl ether, as a blend component with diesel to power a single...

Abstract In this paper, we investigate distributed thermal-electrochemical modeling of a Lithium-Ion battery cell to include the effect of temperature distribution across the thickness of the cell as a first step to study the module level temperature distribution at high charging rates. Most recent works have focused on lumped thermal models for a Li-Ion cell which ignore any temperature differential across cell thickness. However, even a small temperature differential across cell thickness at the cell level can contribute to significant temperature differential in the thickness direction of stacked-up Li-Ion cells at the module level. Such temperature differential can potentially impact the battery charging control system, especially at high charging rates. Here, the thermal-electrochemical partial differential and algebraic equations for a Li-ion cell are solved via a spatial finite difference method. Simulation results show that the temperature differentials over the cell thickness at the cell level are not insignificant, particularly at high charging rates.

AbstractCoral reefs across the world have been seriously degraded and have a bleak future in response to predicted global warming and ocean acidification (OA). However, this is not the first time that biocalcifying organisms, including corals, have faced the threat of extinction. The end‐Triassic mass extinction (200 million years ago) was the most severe biotic crisis experienced by modern marine invertebrates, which selected against biocalcifiers; this was followed by the proliferation of another invertebrate group, sponges. The duration of this sponge‐dominated period far surpasses that of alternative stable‐ecosystem or phase‐shift states reported on modern day coral reefs and, as such, a shift to sponge‐dominated reefs warrants serious consideration as one future trajectory of coral reefs. We hypothesise that some coral reefs of today may become sponge reefs in the future, as sponges and corals respond differently to changing ocean chemistry and environmental conditions. To support this hypothesis, we discuss: (i) the presence of sponge reefs in the geological record; (ii) reported shifts from coral‐ to sponge‐dominated systems; and (iii) direct and indirect responses of the sponge holobiont and its constituent parts (host and symbionts) to changes in temperature andpH. Based on this evidence, we propose that sponges may be one group to benefit from projected climate change and ocean acidification scenarios, and that increased sponge abundance represents a possible future trajectory for some coral reefs, which would have important implications for overall reef functioning.