• Energy Research
• other engineering and technologies close
• 11. Sustainability close
• 6. Clean water close
• IN close
• OM close

Abstract The main hindrances to the large-scale development of renewable-energy projects are the lack of bankability and the inability to align investments and investors with suitable financial instruments or robust policy measures. To illustrate a bankable project, this paper presents a research-based case study on the installation of solar photovoltaic panels on the rooftops of 195 trains of the Indian Railways. Detailed information on the annual running hours, exposure to sunlight, efficiency of solar photovoltaic generation and electrical power demands of each rail coach is considered to conduct a quantitative measure of the tentative amount of fossil fuel savings. The purpose is to provide insight into the types of renewable-energy projects that can be highly attractive to financial institutions and promoters due to their lucrative internal return on investment. As seen in this case study, there are annual savings in diesel of 12 323 088 litres and a CO2 reduction of 32 755 tonnes, with return on investment of 1.3 years. Furthermore, this study conducts a comprehensive analysis of the limitations of existing renewable-energy project financing mechanisms in India. Subsequently, three policy measures are recommended to develop a robust financial mechanism that can effectively meet the needs of investors and investors. These measures include increasing equity injection through a buy-and-hold strategy, providing direct tax benefits to promoters and financing through real-estate investment trusts. The findings are highly relevant to address the challenges associated with bridging the financial gap between access to finance and capital investment in the renewable-energy sector, especially for Asian countries.

Considerable interest is being shown in using biochar production from waste biomass with a variety of disciplines to address the most pressing environmental challenges. Biochar produced by the thermal decomposition of biomass under oxygen-limited conditions is gaining popularity as a low-cost amendment for agro-ecosystems. The efficiency of biochar formation is affected by temperature, heating rate, feedstock type, particle size and reactor conditions. Properties such as pH, surface area and ash content of produced biochar increases with increasing temperatures. Biochar produced at lower heating rates may have high porosity and be beneficial for morphological changes in the soil. Biochar can help to enhance soil health and fertility as well as improve agricultural yield. As a result, biochar can assist in increasing food security by promoting sustainable agricultural systems and preserving an eco-friendly environment. Biochar is also widely being used as a sorbent for organic and inorganic pollutants, owing to its large surface area, allowing it to be immobilized from soil with ease. The functional groups and charges present on the surface of biochar play an important role in pollutants removal. This review focuses on the mechanisms of biochar production using different waste materials as a feed stock, factors that influence biochar quality as well as application of biochar in agricultural soil and their reclamation as well. This article also discusses knowledge gaps and future perspectives in the field of biochar-based toxic-pollution remediation.

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

In a study of the electrochemical behavior of low-cyanide silver plating baths and of the properties of the deposits obtained, it was found that the current-potential curve obtained with a solid electrode showed a two-step reduction wave, the height of the first being 1/5 that of the second. Analysis of the results of polarographic and rotating disk electrode measurmenents sugests that the rate-controlling steps wereAgCN+e-_??_Ag+CN-……(1)Ag(CN)2-+e-_??_Ag+2CN-……(2)for the first and second waves respectively. The Tafel plots of the two waves showed linear relationships at their rising portions, and the reactions are accordingly concluded to be slow chargetransfer controlled.In baths to which selenocyanate ion was added, the increase in current was markedly greater for the second wave than for the first, and the wave was shifted to the positive side. Potential decay curves for the baths containing selenocyanate ion obtained by the current interrupter method showed lower differential capacities than those for baths that were free of selenocyanate ion. This indicates that the selenocyanate ions were adsorbed preferentially at the electrode, suppress the adsorption of cyanide ions and enhancing the silver deposition reaction.Deposits obtained by jet plating were matt at current densities lower than 50A/dm2, and their appearance was not affected by the addition of selenocyanate ion. At above 50A/dm2, deposits obtained from selenocyanate-free baths were burnt, but deposits obtained from baths with selenocyanate ion added were mirror-bright with a strong (200) orientation up to around 150A/dm2.

Energy conservation potential of the evaporative roof cooling technique for a cinema house in a composite climate (characterized by Delhi) has been evaluated. Thermal loads due to heat conduction through the building envelope, the required ventilation and the occupants have been taken into account. Life-cycle-cost analysis has been employed to evaluate the cost effectiveness of this energy conservation technique. It is seen that evaporative cooling on the roof leads to a net saving of 14% in the initial investment and 17% in the annual cost.

The study aims to comprehensively assess the energy and water consumption pattern in the seafood industries and suggest measures for the sustainable development of the sector. The unscrupulous usage of water and higher consumption of energy resulted in an uncontrolled generation of wastewater and enormous usage of fossil fuels. In the seafood industry, energy is primarily used for machinery and equipment handling processes such as freezing, refrigeration, heating, cooling, and drying. Similarly, a huge amount of clean water is used for cleaning machinery and plant, and for operations like washing of raw material, de-icing, defrosting, and salt splashing. As a consequence, in the energy-water nexus, additional energy is required for drawing fresh water and further processing of wastewater demands energy that results in air pollution and greenhouse gas emissions and incurring additional costs to the plant. Hence, this review mainly focuses on the significance of energy and water use optimization in the seafood industry, the existing trend of energy and water use pattern and management practices, optimization strategies, and the seafood-energy-water nexus and its environmental implications.

Abstract Enhancing microalgae biomass productivity through different abiotic and environmental factors optimization is crucial. Design of experimental (DOE) methodology using Taguchi orthogonal array (OA) was studied to evaluate the specific influence of eight important factors (light, pH, temperature, carbon concentration, nitrates, phosphates, magnesium ion concentration and carbon source) on the biomass production using three levels of factor (2 1 × 3 7 ) variation with experimental matrix [L 18 -18 experimental trails]. All the factors were assigned with three levels except light illumination (2 1 ). Substantial influence on biomass productivity is observed with carbon concentration contributing 16.8%, followed by nitrates 12.8% and light 9.3%. Experimental setup eight (Light, pH-8.5, Temperature 25°C, Carbon concentration 10 g/l, nitrates 1.5 g/l, phosphates 0 g/l, magnesium 150 mg/l, Carbon source (glucose)) showed maximum biomass growth (5.26 g/l) and good substrate degradation (63%, COD removal efficiency) contributing to carbohydrate production (257 mg/g biomass) which is further converted to lipids (20% Total lipid and 10% Neutral lipids). Chlorophyll ( a , b ), carbohydrates composition, FAME analysis for lipid percentage were monitored during process operation. Elemental analysis reveals that the carbon to hydrogen and oxygen ratio present in dried algal biomass can be hydrothermally liquefied (HTL) to produce biocrude.

Abstract A process engineering strategy was developed for cultivation of high density biomass of Chlorella sp. FC2 with improved productivity under photoautotrophic condition. The process engineering strategy involved a combinatorial approach of: (i) optimization of CO2 concentration in the inlet gas stream & aeration rate; (ii) growth kinetic driven feeding recipe for limiting nutrients; and (iii) dynamic increase in light intensity. The strategy was tested by growing the cells on laboratory grade BG11 medium. With an attempt to reduce the cultivation cost, the growth performance of the organism was then evaluated on commercial grade BG11 medium. Finally, hydrothermal liquefaction was carried out for direct conversion of microalgal slurry into bio-crude oil. Cultivation on laboratory grade BG11 medium resulted in biomass titer and overall productivity of 8.41 g L−1 and 575.9 mg L−1 day−1 respectively. Significant improvement in biomass titer (13.23 g L−1) and overall productivity (731.6 mg L−1 day−1) was observed when grown on commercial grade BG11 medium. Higher fraction of hydrocarbon in the bio-crude oil depicted better oil quality. Thermal gravimetric analysis revealed that maximum distillate fraction lies within the boiling point range of 200–300 °C which is suitable for conversion into diesel oil, jet fuel, and fuel for stoves.

Abstract Higher resolution rock formation characterization is of paramount priority, amid growing interest in injecting carbon dioxide, CO2, into subsurface rock formations of depeleting/depleted hydrocarbon reservoirs or saline aquifers in order to reduce emissions of greenhouse gases. In this paper, we present a case study for a Mississippian carbonate characterization integrating post-stack seismic attributes, well log porosities, and seismic petrophysical facies classification. We evaluated changes in petrophysical lithofacies and reveal structural facies-controls in the study area. Three cross-plot clusters in a plot of well log porosity and acoustic impedance corroborated a Neural Network petrophysical facies classification, which was based on training and validation utilizing three petrophysically-different wells and three volume seismic attributes, extracted from a time window including the wavelet of the reservoir-top reflection. Reworked lithofacies along small-throw faults has been revealed based on comparing coherency and seismic petrophysical facies. The main objective of this study is to put an emphasis on reservoir characterization that is both optimized for and subsequently benefiting from pilot tertiary CO2 carbon geosequestration in a depleting reservoir and also in the deeper saline aquifer of the Arbuckle Group, south central Kansas. The 3D seismic coherency attribute, we calculated from a window embracing the Mississippian top reflection event, indicated anomalous features that can be interpreted as a change in lithofacies or faulting effect. An Artificial Neural Network (ANN) lithofacies modeling has been used to better understand these subtle features, and also provide petrophysical classes, which will benefit flow-simulation modeling and/or time-lapse seismic monitoring feasibility analysis. This paper emphasizes the need of paying greater attention to small-scale features when embarking upon characterization of a reservoir or saline-aquifer for CO2 based carbon geosequestration.