• Energy Research
• 13. Climate action close
• 12. Responsible consumption close
• 11. Sustainability close
• IN close
• RU close
• SA close

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

AbstractThis article shows the results of hydrological studies on the river Don around water-intake facilities in Rostov-on-Don. The factors of wind-surge influencing ecstatic increases in the water level of the receiving basin are presented. The uneven seasonal and long-term flow river regime leading to intensive channel deformations was evaluated. A low water discharge, causing an active rift deformation within the saddle was of a high river-forming significance for the natural water flow due to a high amount of water irrespective of the yearly water content. However, the river reformation occurred mostly during a high water discharge (flooding): the floodplain was subdivided into separate arrays of channels and creeks constituting several branches within the floodplain. These deformations facilitated the formation of the easily washed floodplain alluvium. These deformations occurred mainly during years with the abundant rainfall. For a relatively short period of time (the flood period) the most significant river bed deformation occurred during the natural flow. Hydrographs were drafted according to the results of the studies on the water-level regime.

This paper studied the droplet transport and deposition in the turbulent flow inside a wave-plate eliminator of the waste-heat utilisation complex (WHUC). The Lagrangian discrete particle approach was used to simulate the process of liquid separation from wet steam flow. Two different models for droplet-eddy interaction were tested using data from the available literature. The tested numerical model was used to predict the WHUC performance.

AbstractRecently, modern power systems depend heavily on MicroGrids (MGs), which can accommodate Distributed Energy Resources (DERs) economically and with high flexibility. MGs integrated with DERs can assist in enhancing energy security, significant cost savings, and reduction in emission of greenhouse gases. In this paper, the assessment of operating performance of proposed MG system with DERs is employed to investigate the multi‐objective problems of cost optimization and economic scheduling. A grid‐connected Micro‐grid (MG) combined with solar photovoltaic (PV), wind turbine (WT), fuel cell (FC), and Battery Energy Storage System (BESS) is implemented to model the problem. This proposed model is considered as a test system for cost optimization and battery charging/discharging optimization. The developed framework is presented as multi‐objective function with constraints that can be tackled using an effective optimization technique. The above stochastic multi‐objective problem is optimized using various commonly used Physics based Meta‐heuristic techniques such as Simulated Annealing (SA), Harmony Search (HS), Slime Mold Algorithm (SMA), Gravitational Search Algorithm (GSA), Black Hole Optimization (BHO), Sine Cosine Algorithm (SCA), Multiverse optimization (MVO) and Lightning Search Algorithm (LSA). The assessment of the aforementioned physics‐based optimization techniques used on the proposed MG test system is compared using the results. According to the analysis, Black Hole Optimization (BHO) and Lightning Search Algorithm (LSA) both provide greater cost savings overall and for battery charging, respectively. The suggested optimization methods will take the BESS charging/discharging pattern and total cost savings into account.

Heat stress and cold stress have a negative influence on cattle welfare and productivity. There have been some studies investigating the influence of cold stress on cattle, however the emphasis within this review is the influence of heat stress on cattle. The impact of hot weather on cattle is of increasing importance due to the changing global environment. Heat stress is a worldwide phenomenon that is associated with reduced animal productivity and welfare, particularly during the summer months. Animal responses to their thermal environment are extremely varied, however, it is clear that the thermal environment influences the health, productivity, and welfare of cattle. Whilst knowledge continues to be developed, managing livestock to reduce the negative impact of hot climatic conditions remains somewhat challenging. This review provides an overview of the impact of heat stress on production and reproduction in bovines.

AbstractIn the present study, we analyze a field-based seven-year data series of surface mass-balance measurements collected during 2011/12 to 2017/18 on Naradu Glacier, western Himalaya, India. The average annual specific mass balance for the said period is − 0.85 m w.e. with the maximum ablation of − 1.15 m w.e. The analysis shows that the topographic features, south and southeast aspects and slopes between 7 to 24 degrees are the reasons behind the maximum ablation from a particular zone. The causes of surface mass balance variability have been analyzed through multiple linear regression analyses (MLRA) by taking temperature and precipitation as predictors. The MLRA demonstrates that 71% of the observed surface mass balance variance can be explained by temperature and precipitation. It clearly illustrates the importance of summer temperature, which alone explains 64% variance of surface mass balance. The seasonal analysis shows that most of the surface mass balance variability is described by summer temperature and winter precipitation as two predictor variables. Among monthly combinations, surface mass balance variance is best characterized by June temperature and September precipitation.

Local renewable energy resources (RES) are often considered as an alternative to the conventional power supply by means of power lines. This is an urgent approach for rural electrification if there are long distances from main substations, and distribution feeders’ construction and service is not cost effective for grid companies. Nevertheless, the real potential for RES implementation at some regions could be limited by economic, geographical and climatic factors especially. The paper gives a review of the experience of power supply type selection for distant consumers given the specific northern continental conditions. The main goal of the paper is the methods estimating technical and economical efficiency of power supply system alternatives including centralized power supply and standalone microgrid implementation to select suitable power supply variant.