• Energy Research
• Restricted close
• RU close
• IN close
• CNR ExploRA close

Wood biomass is turned into industrial fuel through chipping. The efficiency of chipping depends on many factors, including chipper knife wear. Chipper knife wear was determined through a long-term follow-up study, conducted at a waste wood recycling yard. Knife wear determined a sharp drop of productivity (>20%) and a severe decay in product quality. Dry sharpening with a grinder mitigated this effect, but it could not replace proper wet sharpening. Increasing the frequency of wet sharpening sessions determined a moderate increase of knife depreciation cost, but it could drastically enhance machine performance and reduce biomass processing cost. Since benefits largely exceed costs, increasing the frequency of wet sharpening sessions may be an effective measure for reducing overall chipping cost. If the main goal of a chipper operator is to increase productivity and/or decrease fuel consumption, then managing knife wear should be a primary target. (C) 2014 Elsevier Ltd. All rights reserved.

The paper presents a method of analysis and design of urban landscapes called PlaceMaker. The method is intended as a key resource for assessing the identity of places and measures for its enhancement, reconstruction and design. By using different tools for analysis and interpretation of places and questionnaires administered to their users, PlaceMaker finds the identity material that the city has available and how to de-compose and re-compose it for its sustainable project transformation. Pedestrian-intensive areas, in particular urban, cultural and historical poles of attraction, increasingly bear the imprint of globalization, conveying messages which have developed in an uncontrolled manner and are aimed at conveying their users' patterns of thought and action. The presence of a dense mixture of contrasting elements and perceptions can detract from the image of a city. As regards, the paper is completed with a synopsis of the experiment carried out in an historic axe in London - Oxford Street - where globalization is in danger of levelling out the beauty of the area in favour of widespread genericity

Bioenergy crops are well known for their ability to reduce greenhouse gas emissions and increase the soil carbon stock. Although such crops are often held to be in competition with food crops and thus raise the question of current and future food security, at the same time mitigation measures are required to tackle climate change and sustain local farming communities and crop production. However, in some cases the actions envisaged for specific pedo-climatic conditions are not always economically sustainable by farmers. In this frame, energy crops with high environmental adaptability and yields, such as giant reed (Arundo donax L.), may represent an opportunity to improve farm incomes, making marginal areas not suitable for food production once again productive. In so doing, three of the 17 Sustainable Development Goals (SDGs) of the United Nations would be met, namely SDG 2 on food security and sustainable agriculture, SDG 7 on reliable, sustainable and modern energy, and SDG 13 on action to combat climate change and its impacts. In this work, the response of giant reed in the marginal areas of an agricultural district of southern Italy (Destra Sele) and expected farm incomes under climate change (2021-2050) are evaluated. The normalized water productivity index of giant reed was determined (WP; 30.1gm-2) by means of a SWAP agro-hydrological model, calibrated and validated on two years of a long-term field experiment. The model was used to estimate giant reed response (biomass yield) in marginal areas under climate change, and economic evaluation was performed to determine expected farm incomes (woodchips and chopped forage). The results show that woodchip production represents the most profitable option for farmers, yielding a gross margin 50% lower than ordinary high-input maize cultivation across the study area.

Thermochemical systems for energy conversion are just at the interface between chemical and thermal engineering because the final aim is a transformation of energy, while the specific tool is a thermally driven chemical reaction. Designing the efficient systems calls for appropriate choice of chemical process, comprehensive analysis of its thermodynamics and kinetics, intensification of heat and mass transfer, intelligent integration of components into overall heat device, etc. This paper reviews the joint activity of the six institutes from the four countries on applying chemical reactions in modern devices for production of cold, which are driven by solar heat.

Farming of shellfish and seaweeds is a tested tool for mitigating eutrophication consequences in coastal environments, however as many other marine economic activities it should be a subject of marine spatial planning for designating suitable sites. The present study proposes site selection framework for provisional zebra mussel farming in a eutrophic lagoon ecosystem, aimed primarily at remediation purposes. GIS-based multi-criteria approach was applied, combining data from empirical maps, numerical models and remote sensing to estimate suitability parameters. Site selection and prioritisation of suitable areas considered 15 environmental and socio-economic criteria, which contributed to 4 optimisation models (settlement, growth and survival of mussels, environmental and socio-economic) and 3 predefined scenarios representing provisional goals of mussel cultivation: spat production, biomass production and bioremediation. The relative importance of each criterion was assessed utilizing the Analytical Hierarchy Process. Site suitability index was calculated and the final result of the site selection analysis was summarized for 3 scenarios and overall suitability map. Four suitability classes (unsuitable, least, moderately and most suitable) were applied, and 3 most suitable zones for provisional zebra mussel cultivation with 12 candidate sites were selected accordingly. The integrated approach presented in this study can be adjusted for designating zebra mussel farming sites in other estuarine lagoon ecosystems, or cultivation of other mussel species for bioremediation purposes. The analytical framework and the workflow designed in this study are also adoptable for addressing other aquaculture-related spatial planning issues.

AbstractDonor–acceptor dyes are a well‐established class of photosensitizers, used to enhance visible‐light harvesting in solar cells and in direct photocatalytic reactions, such as H2 production by photoreforming of sacrificial electron donors (SEDs). Amines—typically triethanolamine (TEOA)—are commonly employed as SEDs in such reactions. Dye‐sensitized photoreforming of more sustainable, biomass‐derived alcohols, on the other hand, was only recently reported by using methanol as the electron donor. In this work, several rationally designed donor–acceptor dyes were used as sensitizers in H2 photocatalytic production, comparing the efficiency of TEOA and EtOH as SEDs. In particular, the effect of hydrophobic chains in the spacer and/or the donor unit of the dyes was systematically studied. The H2 production rates were higher when TEOA was used as SED, whereas the activity trends depended on the SED used. The best performance was obtained with TEOA by using a sensitizer with just one bulky hydrophobic moiety, propylenedioxythiophene, placed on the spacer unit. In the case of EtOH, the best‐performing sensitizers were the ones featuring a thiazolo[5,4‐d]thiazole internal unit, needed for enhancing light harvesting, and carrying alkyl chains on both the donor part and the spacer unit. The results are discussed in terms of reaction mechanism, interaction with the SED, and structural/electrochemical properties of the sensitizers.

This study provides a state-of-the art overview of forest biomass harvesting technologies and supply chains used in North America, Europe and the Southern Hemisphere. The productivity and cost of selected efficient technologies is presented for each country with a brief description about the source of the biomass and harvesting method. Expert opinions on the most successful biomass operations have been presented briefly for each country. The main conclusions from various intentional studies are provided in addition to future requirements for research and development. This report can be a useful high level guide of technology and supply chain selection for industry and academics.

AbstractThe photophysical properties of a supramolecular fullerene–porphyrin ensemble resulting from the self‐assembly of a pyrrolidinofullerene–imidazole derivative (F1) with a multimetalloporphyrin array constructed around a hexasubstituted fullerene core (F(ZnP)12) have been investigated. The fullerene hexa‐adduct core of the host system does not play any active role in the cascade of photoinduced events of the supramolecular ensemble, indeed no intercomponent photoinduced processes could be observed in host F(ZnP)12. In contrast, upon axial coordination with the monosubstituted fullerene guest F1, a quantitative quenching of the fluorescence signal of the metalloporphyrins was observed for the supramolecular complex [F(ZnP)12(F1)n] both in polar and nonpolar solvents. In toluene, the supramolecular ensemble exhibits a charge transfer emission centered around 930 nm, suggesting the occurrence of intramolecular face‐to‐face interactions of F1 with neighboring metalloporphyrin moieties within the self‐assembled photoactive array. This mechanism is supported by the fact that a one order of magnitude increase in the binding constant was observed for the supramolecular complex [F(ZnP)12(F1)n] when compared with a reference system lacking the pyrrolidinofullerene unit. In benzonitrile, a long‐lived charge‐separated state (τ=0.3 μs) has been detected for the supramolecular adduct.