• Energy Research
• other engineering and technologies close
• IT close
• IR close
• AE close

One of the main uncertainties in long‐term distribution network planning is load forecasting error. This paper presents a probabilistic multistage expansion planning method to consider the load forecasting error as well as pseudo dynamic behavior of network parameters and geographical constraints. The optimal routes of MV feeders as backbone of distribution networks are obtained for both mid and long‐term case with deterministic and probabilistic modeling. The Imperialist Competitive Algorithm (ICA) is adapted for the optimal expansion planning of MV distribution network. To check and maintain the radial configuration of the MV distribution network during ICA random operators, a novel algorithm is employed. Comparative tabular and graphical results are given for deterministic and probabilistic planning. In probabilistic case the results is also represented by histogram of statistics data, mean and standard deviation of input and output variables using Monte Carlo Simulation (MCS). Based on the results it is possible to design the MV network at the presence of uncertainties more robust and flexible with respect to deterministic planning without reasonable increase in total cost. The efficiency and capability of the method is tested on a relatively large‐scale distribution network.

AbstractService unavailability of transmission lines, due to the direct and indirect lightning strikes, is evaluated as a challenging issue within electric companies. The lightning event can produce dangerous overvoltage, equipment failures, and power supply interruptions. Here, externally gapped line arresters (EGLAs) performances installed on a 63 kV transmission line are modelled using EMTP‐ATP to investigate their capability to withstand current and energy discharged by lightning strokes during back flashover phenomena. Frequency behaviour of the grounding system impedance, first and subsequent lightning current parameters effects on insulators back flashover and lightning flashover failure rate have been considered by Monte‐Carlo method. Then, extensive analysis has been carried out to study the absorbed energy of the EGLA and its expected life. The results show the dependency of failure rate and the EGLA expected life on the soil resistivity and lightning strike parameters. The selected EGLA must be provided sufficient lightning protection to the transmission line based on its absorbed energy capability, the soil and lightning parameters and be complied with the discharge energy capability requirement specified by the utility company.

Due to the single-phase loads and their stochastic behavior, the current in the distribution feeders is not balanced. In addition, the single-phase loads are located in different positions along the LV feeders. So the amount of the unbalanced load and its location affect the feeder losses. An unbalanced load causes the feeder losses and the voltage drop. Because of time-varying behavior of the single-phase loads, phase balancing is a dynamic and combinatorial problem. In this research, a heuristic and dynamic solution for the phase balancing of the LV feeders is proposed. In this method, it is supposed that the loads’ tie could be connected to all phases through a three-phase switch. The aim of the proposed method is to make the feeder conditions as balanced as possible. The amount and the location of single-phase loads are considered in the proposed phase balancing method. Since the proposed method needs no communication interface or no remote controller, it is inexpensive, simple, practical, and robust. Applying this method provides a distributed and dynamic phase balancing control. In addition, the feasibility of reducing the used switches is investigated. The ability of the proposed method in the phase balancing of the LV feeders is approved by carrying out some simulations.

AbstractAn arc‐furnace model consisting of non‐linear, time‐varying resistance, realized by the Alternative Transients Program (ATP), is presented in this paper. It is shown that the model is appropriate for flicker investigation in electrical networks supplying arc furnaces, constituting a valid alternative to the linear arc modelling realized by amplitude modulation of voltage generators. Block diagram of the procedure for ATP modelling of the nonlinear, time‐varying arc resistance, dynamic voltage‐current characteristic of the furnace electric arc, voltage and current arc waveforms and characteristic curves of an arc furnace, obtained by ATP simulation, are presented, referring to circuit parameters taken from an actual plant and to a sinusoidal law for arc‐length time variation. Aflickermeter ATP simulation is realized to derive equivalent voltage‐variation values in agreement with the actual flicker measurements.

Abstract The central role of occupants for achieving energy savings in residential buildings is increasingly recognised. Simulation programmes able to take into account occupant behaviour are considered to be powerful tools for bridging the gap between the predicted and the actual energy consumption for new buildings. Nevertheless, the majority of residential buildings that will constitute the housing stock in 2050 have already been built today, therefore occupant behaviour and building simulation tools need to be fully exploited for supporting the renovation of existing housing stock. The aim of this paper is to explore the role of occupant behaviour modelling in supporting decision-makers dealing with the design of renovation strategies for residential buildings. An Italian multi-family public housing building is assumed as case study to estimate the influence of three dimensions linked with occupant behaviour – management of the thermostat, management of the heating system, variation of building characteristics – on energy heating consumption. The results show that, while the occupant behaviour influences the heating loads up to 1/3 in case of high level of building retrofit, the less the building is renovated, the higher is the behavioural impact in absolute terms of energy reduction. Therefore, in order to be effective, renovation strategies are required to design appropriate informative instruments at an early stage to support behaviour changes towards responsible energy consumption.

The main objective of this paper is to illustrate the current state of the art of the newborn smart gas grid concept. We provide a detailed discussion of the envisaged features of the smart gas grid, giving attention to both the related academic literature and to the ongoing world-wide projects. In doing so, we also discuss the potentialities of rethinking the smart grid paradigm from the perspective of a whole energy system, that both encompasses the electrical and the gas grid, and identify some critical key aspects that must be handled while developing the new smart energy paradigm.

Abstract In this paper, a general mathematical model for the dynamic simulation of a single-effect LiBr/water absorption chiller is presented. The model is based on mass and energy balances applied to the internal components of the machine, and it accounts for the non-steady behaviour due to thermal and mass storage in the components. The validation of the mathematical model is performed through experimental data collected on a commercial small-capacity water-cooled unit. Due to the peculiar technology adopted in the real chiller, a special effort was made to identify the appropriate values of the main physical parameters. The validation of the model is based on the values of the water temperature at the outlet of the machine, as no measurement inside the machine was possible; anyway, a consistency analysis applied to the internal parameters is also presented. The agreement between experimental and simulated results is very good, both on a daily and on a seasonal basis.

Abstract In this paper, a reintegration-based multi-objective intentional controlled islanding (ICI) model is proposed to enhance resiliency of electrical power systems under catastrophic events. This remedial measure plan relies on a mixed-integer linear programming model with two objective functions including reintegration risk and total load shedding value. While ensuring that each island includes only coherent generators, the proposed multi-objective model solves the controlled islanding problem using lexicographic optimization approach. To ease the islands’ reintegration, charging reactive power, reliability, capacity, and power flow disruption of transmission lines are considered in the model. After implementation of controlled islanding, each resulted island may face temporary active/reactive load-generation imbalance, which may put the islands at the risk of frequency instability, transient voltage instability or a combination of both. The proposed model reduces these risks by modeling energy storage systems (ESSs) and static VAR compensators (SVCs) as fast corrective control actions. In addition to modeling voltage dependent loads in the controlled islanding problem, a linear island frequency response (IFR) model is proposed for frequency stability assessment. The test results of the proposed ICI model on the IEEE 39-bus and IEEE 118-bus test systems demonstrate its performance.