• Energy Research
• 2021-2025close
• other engineering and technologies close
• IT close
• IR close
• AE close

AbstractService unavailability of transmission lines, due to the direct and indirect lightning strikes, is evaluated as a challenging issue within electric companies. The lightning event can produce dangerous overvoltage, equipment failures, and power supply interruptions. Here, externally gapped line arresters (EGLAs) performances installed on a 63 kV transmission line are modelled using EMTP‐ATP to investigate their capability to withstand current and energy discharged by lightning strokes during back flashover phenomena. Frequency behaviour of the grounding system impedance, first and subsequent lightning current parameters effects on insulators back flashover and lightning flashover failure rate have been considered by Monte‐Carlo method. Then, extensive analysis has been carried out to study the absorbed energy of the EGLA and its expected life. The results show the dependency of failure rate and the EGLA expected life on the soil resistivity and lightning strike parameters. The selected EGLA must be provided sufficient lightning protection to the transmission line based on its absorbed energy capability, the soil and lightning parameters and be complied with the discharge energy capability requirement specified by the utility company.

Abstract In this paper, a reintegration-based multi-objective intentional controlled islanding (ICI) model is proposed to enhance resiliency of electrical power systems under catastrophic events. This remedial measure plan relies on a mixed-integer linear programming model with two objective functions including reintegration risk and total load shedding value. While ensuring that each island includes only coherent generators, the proposed multi-objective model solves the controlled islanding problem using lexicographic optimization approach. To ease the islands’ reintegration, charging reactive power, reliability, capacity, and power flow disruption of transmission lines are considered in the model. After implementation of controlled islanding, each resulted island may face temporary active/reactive load-generation imbalance, which may put the islands at the risk of frequency instability, transient voltage instability or a combination of both. The proposed model reduces these risks by modeling energy storage systems (ESSs) and static VAR compensators (SVCs) as fast corrective control actions. In addition to modeling voltage dependent loads in the controlled islanding problem, a linear island frequency response (IFR) model is proposed for frequency stability assessment. The test results of the proposed ICI model on the IEEE 39-bus and IEEE 118-bus test systems demonstrate its performance.

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

Exterior insulation finishing systems (EIFSs) can efficiently promote energy efficiency of buildings. In this study, an EIFS with high thermal efficiency is presented to improve the insulation behavior of building enclosure. Based on heat transfer analysis results, energy simulations of buildings with fire spread prevention structures were performed. Results revealed that heat flow through the wall increased by 10.3 % when using a metal rail to fix the insulation; in contrast, using non-combustible phenolic foam reduces heat flow by 37.4 %, satisfying the requirement for fire spread prevention structures. Additionally, the energy consumption decreased by 8.8 % when both mineral wool and phenolic foam were applied. Fire spread prevention structures are essential to improve the fire safety performance of buildings. This external insulation system efficiently promote energy saving in building; additionally, leveraging a phase change material to improve the thermal storage performance of the building can reduce energy consumption by up to 11.9 %.

In most industrial processes, toxic pollutants and vapors are produced and released, which cause various diseases in people working in industry and irreparable damage to the environment. Industrial ventilation systems are considered as one of the most effective methods of reducing and controlling gaseous pollutants and dust particles. One of the effective systems in industrial ventilation is blowing -suction ventilation systems. In this study, the effect of flow ratio (ratio of blowing flow to suction flow) and direction of blowing jet air on the performance of blowing-suction ventilation system was investigated numerically. The mixing parameter has been used as an indicator to measure the performance of the ventilation system. The results showed that the performance of the ventilation system blowing-sucking by reducing the current ratio improved exponentially. It was also found that one of the ways to improve the performance of the blowing – suction ventilation system is to reduce the direction of the blowing angle.

The assessment of the ‘quality’ of built heritage is a complex transdisciplinary issue, which both public administrations and real estate developers need to carefully consider when making any interventions. Recent international climate regulations underline that currently around 75% of buildings in the EU are not energy efficient. In Italy, those inefficient buildings are more than 50 years old and, if subjected to retrofit interventions, risk being totally transformed and losing their historical value in favor of a more contemporary use. This work aimed to study the residential heritage of the second half of the 20th century in the real estate market and to understand if, how, and in what measure the building and architectonical qualities are recognized and monetized by buyers. The city of Turin was chosen as a study area, and residential building qualities were analyzed using two quality indicators to perform a GWR on market POIs. The results highlighted that housing historical qualities are not homogeneously recognized by the real estate market, in favor of green ones. This work can help both public and private bodies to identify which ‘invisible’ quality residential buildings are immediately exploitable for enhancement strategies, with more respectful retrofitting interventions and a modern protection policy.

Battery participation in the service of power system frequency regulation is universally recognized as a viable means for counteracting the dramatic impact of the increasing utilization of renewable energy sources. One of the most complex aspects, in both the planning and operation stage, is the adequate characterization of the dynamic variation of the state of charge of the battery in view of lifetime preservation as well as the adequate participation in the regulation task. Since the power system frequency, which is the input of the battery regulation service, is inherently of a stochastic nature, it is easy to argue that the most proper methodology for addressing this complex issue is that of the theory of stochastic processes. In the first part of the paper, a preliminary characterization of the power system frequency is presented by showing that with an optimal degree of approximation it can be regarded as an Ornstein–Uhlenbeck process. Some considerations for guaranteeing desirable performances of the control strategy are performed by assuming that the battery-regulating power depending on the frequency can be described by means of a Wiener process. In the second part of the paper, more realistically, the regulating power due to power system changes is described as an Ornstein–Uhlenbeck or an exponential shot noise process driven by a homogeneous Poisson process depending on the frequency response features requested of the battery. Because of that, the battery state of charge is modeled as the output of a dynamic filter having this exponential shot noise process as input and its characterization constitutes the central role for the correct characterization of the battery life. Numerical simulations are carried out for demonstrating the goodness and the applicability of the proposed probabilistic approach.