• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• 11. Sustainability close
• IT close
• AU close
• ES close

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

Abstract The central role of occupants for achieving energy savings in residential buildings is increasingly recognised. Simulation programmes able to take into account occupant behaviour are considered to be powerful tools for bridging the gap between the predicted and the actual energy consumption for new buildings. Nevertheless, the majority of residential buildings that will constitute the housing stock in 2050 have already been built today, therefore occupant behaviour and building simulation tools need to be fully exploited for supporting the renovation of existing housing stock. The aim of this paper is to explore the role of occupant behaviour modelling in supporting decision-makers dealing with the design of renovation strategies for residential buildings. An Italian multi-family public housing building is assumed as case study to estimate the influence of three dimensions linked with occupant behaviour – management of the thermostat, management of the heating system, variation of building characteristics – on energy heating consumption. The results show that, while the occupant behaviour influences the heating loads up to 1/3 in case of high level of building retrofit, the less the building is renovated, the higher is the behavioural impact in absolute terms of energy reduction. Therefore, in order to be effective, renovation strategies are required to design appropriate informative instruments at an early stage to support behaviour changes towards responsible energy consumption.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

This article concerns a field study about the use of non-invasive manual lighting and shading control to save energy in listed buildings. The system was chosen to limit cabling and masonry work. The test room consists of an individual office located in a historical building in Southern Italy. The room was retrofitted with two roller shades (semi-transparent and blackout) and six LED-based pendants provided with step-dimming and three Correlated Colour Temperature options. Shading and lighting could be remotely controlled from the desk by six subjects who took part in the test for two weeks each. Behavioural interventions and a set back to default setting at the end of the working day were adopted to improve the test subjects’ energy behaviour. The results show that energy for lighting could be reduced between 15% and 71% compared to European benchmark, with wide range accounting for variability of individual preference and weather conditions. The savings are due to the computer-based work, the communication and engagement campaign, as well as the default settings. The findings suggest that simple manually controlled systems are energy and economic viable solution for listed buildings, since the system accommodates users’ needs, and proper training is provided to the users.

Electricity generation systems have traditionally been evaluated using only a limited number of economic or environmental indicators, for example capital investment, generation cost or carbon dioxide emissions. Moreover, the evaluations have generally been restricted to performance within the geographic boundary of the power station. This paper reports a sustainability assessment of power generation from Australian fossil fuels, notably black coal, brown coal and natural gas. A range of key sustainability indicators incorporating environmental, economic and social performance are included. The system boundary incorporates fuel extraction, fuel transport to the power station, generation of power, and transmission of electricity to the point of use. Most commonly employed existing technologies and some promising advanced technologies for power generation are considered. The cases of exporting Australian LNG and black coal to Japan for power generation in that country have also been considered. No one fuel or technology system was superior or inferior for every indicator. However the following generalizations can be made: Natural gas combined cycle systems have advantages for the majority of environmental and economic indicators, brown coal has an advantage in terms of value added, and black coal has relatively poor safety performance.

Abstract In recent years, modern appliances with high electricity demand have played a significant role in residential energy consumption. Despite the positive impact of these appliances on the quality of life, they suffer from major drawbacks, such as serious environmental concerns and high electricity bills. This paper introduces a consolidated framework of load management to alleviate those drawbacks. Initially, benefiting from a demonstrative analysis of home energy consumption data, controllable and responsive appliances in smart home are identified. Then, the energy consumption pattern is reduced and shifted using flexible load models and better utilization of existing energy storage systems. This can be achieved through data mining approaches, i.e., density-based spatial clustering of application with noise (DBSCAN) method. In this technique, no sensor for detection or measurement instruments will be required, whose deployment incur cost to the system or increase security risk for consumers. In the following, one scheduling of using controllable appliances, which is formulated by convex optimization, is considered for the demand response (DR) program, provided that this plan doesn't affect customers’ priority and convenience. In the last stage, the deployment of energy storage systems, such as plug-in hybrid electric vehicles (PHEVs) and battery energy storage systems (BESS), is introduced to lower the energy cost and improve the performance of the proposed DR model. Simulation results of this demand response are compared with conventional k-clustering methods to confirm the economic superiority of the DBSCAN clustering technique using the data of a residential unit during three different scenarios.

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.