• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Embargo close
• 12. Responsible consumption close
• IT close
• DE close
• BE close

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

Cogeneration of heat and electricity is an important pillar of energy and climate policy. To plan the production and distribution system of combined heat and power (CHP) systems for residential heating, suitable methods for decision support are needed. For a comprehensive feasibility analysis, the integration of the location and capacity planning of the power plants, the choice of customers, and the network planning of the heating network into one optimization model are necessary. Thus, we develop an optimization model for electricity generation and heat supply. This mixed integer linear program (MILP) is based on graph theory for network flow problems. We apply the network location model for the optimization of district heating systems in the City of Osorno in Chile, which exhibits the “checkerboard layout” typically found in many South American cities. The network location model can support the strategic planning of investments in renewable energy projects because it permits the analysis of changing energy prices, calculation of break-even prices for heat and electricity, and estimation of greenhouse gas emission savings.

Abstract In many cases, hazardous wastes are subject to thermal treatment at elevated temperatures. Some types of wastes do not have a sufficient calorific value to cover the heat demand of the high temperature process. For thermal treatment of e.g. filter residues, dusts, sulfuric acid, aluminium dross, foundry sand, or waste water, supplementary energy supply is needed. The specific energy demand ranges from 0.5 to 2.5 kWh/kg (2–10 MJ/kg). An important aim of process optimisation is the reduction of (fossil) energy consumption and exhaust gas flow. Concentrated solar energy promises advantages when applied to high energy consuming waste treatment processes with regard to substitute fossil or electric energy consumption, to reduce CO2 emissions, and exhaust gas flow. In parallel to conceptional studies, a solar-heated rotary kiln mini-plant has been designed and constructed for tests in the DLR solar furnace. The tests will give indications of boundary conditions for solar thermal treatment or conversion of selected hazardous materials.

Buildings in private and domestic use are responsible for about 30% of the global greenhouse gas emissions attributable mainly to their need for heating and cooling energy. This corresponds to about 40% of the global final energy consumption. Therefore, a viable implementation of building energy efficiency policies is inevitable to realize a transformation of the energy system to mitigate climate change. Within the building sector lies a huge potential for emission reduction consisting in the renovation of the existing building stock and climate-friendly building guidelines applicable to new constructions, both adapting CO2-neutral technology solutions. However, as there are several different pathways leading to a decarbonized energy system, there is always the question which political and technological solutions are most efficient, effective, and feasible. This paper aims to analyze building efficiency policy measures and instruments and the related technological solutions in two front-runner countries of the energy transition, possessing different structural conditions: Germany and Norway. We hence apply a comparative approach which allows us to present and assess the policies in place. The paper answers three research questions: (1) Which policies prevail in Germany and Norway to foster the deployment of energy efficient and decarbonized solutions for residential buildings? (2) How do these policies respond to country-specific barriers to the energy transition in the building sector, and (3) What effects do they have on the actual implementation of technological and societal solutions? This research provides a new insight to the highly relevant topic of energy efficiency in buildings in the context of international Intended Nationally Determined Contribution benchmarking and discusses some unsolved trade-offs in the translation of the global climate governance into the national building sector.

Abstract Orange Peel Waste (OPW) is a widely produced residue whose management is complicated by its physical and chemical properties. Anaerobic digestion (AD), which is commonly used for the treatment and exploitation of many biodegradable wastes, is inefficient on OPW due to the presence of essential oils (mainly d -Limonene) as well as the low pH, which cause the process to be unstable. Here we explore the effect of alkaline pre-treatment of OPW and of the addition of granular activated carbon (GAC) and Zero Valent Iron (ZVI) in improving AD in two semi-continuous reactors at a laboratory scale. The addition and pre-treatment of ZVI/GAC were shown to help process stability up to a loading of 3 kgVS·m−3·d−1 and to increase methane production even at a sub-optimal pH. The investigation of the bacterial community, by high-throughput sequencing, has also increased our insight on their involvement in AD in the presence of ZVI, including its biotic oxidation. In addition, direct interspecies electron transfer was shown to play a role in the reactor supplemented with ZVI.

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

Abstract Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%.