• Energy Research
• 13. Climate action close
• 7. Clean energy close
• 2. Zero hunger close
• US close
• CA close
• IT close
• English close

The need for an improved control strategy for the operation of a wind-powered refrigeration system for the storage of apples was investigated. The results are applicable to other systems which employ intermittently available power sources, battery and thermal storage, and an auxiliary, direct current power supply. Tests were conducted on the wind-powered refrigeration system at the Virginia Polytechnic Institute and State University Horticulture Research Farm in Blacksburg, Virginia. Tests were conducted on the individual components of the system. In situ windmill performance were also conducted. The results of these tests have been presented. An improved control strategy was developed to improve the utilization of available wind energy and to reduce the need for electrical energy from an external source while maintaining an adequate apple storage environment. Ph. D.

Dielectric and anelastic spectroscopies are complementary techniques and their combination allows valuable information to be obtained in the field of multifunctional materials. Whereas the dielectric spectroscopy measures the dielectric susceptibility ?(?,T) and it is sensitive to fluctuations of electric dipoles, the anelastic spectroscopy measures the elastic compliance or elastic susceptibility s(?,T) and it is sensitive to fluctuations of elastic dipoles. Both susceptibilities are complex, their immaginary part being due to the delayed response of the mobile defects coupled to the electric field/stress. The great advantage of using a combination of both techniques is that the anelastic measurements are insensitive to free charges, therefore it is possible to measure the dynamics of ions also in the presence of free charges. Two main types of investigations have been pursued by the combination of these techniques: the study of structural phase transitions and the study of microscopic mechanisms associated with the presence of defects, both important for the knowledge and development of multifunctional materials. We have applied this approach for different functional materials with perovskite framework: multiferroic, ferroelectric and relaxor ferroelectric ceramics, and organic-inorganic perovskite photovoltaics. Thanks to the combination of the two spectroscopies, it has been possible to probe more accurately the structural transitions involving the antiferrodisortive tilt modes of the octahedra in PZT [1] and NBT-BT [2]. It was also possible to evidence incipient phase separation in lead titanate-based multiferroics [3]. Moreover, since the elastic response is insensitive to free charges, it has been used to probe the piezoelectric response even in unpoled ceramics [4] and for the study of coexisting ferroelectric and metallic states [5]. The combination of the two techniques allowed also new features to be revealed on the reorientation dynamics of the organic molecules in MAPbI3 photovoltaic organic-inorganic perovskites and the hindrance of their ferroelectric order by coupling with the tilt modes [6]. 1. F. Cordero, F. Trequattrini, F. Craciun, C. Galassi, Phys. Rev. B, 87 (2013) 094108 2. F. Cordero, F. Craciun, F. Trequattrini, et al., Phys. Rev. B, 81 (2010) 144124 3. F. Craciun, F. Cordero, B. Vasile, et al., Phys. Chem. Chem. Phys., 20 (2018) 14652 4. F. Cordero, F. Craciun, F. Trequattrini, C. Galassi, Phys. Rev. B, 93 (2016) 174111 5. F. Cordero, F. Trequattrini, F. Craciun, et al., Phys. Rev. B, 99 (2019) 064106 6. F. Cordero, F. Craciun, F. Trequattrini, et al., J. Phys. Chem. Lett., 9 (2018) 4401

This Milestone, namely M3.3, is part of Task 3.3 “Downscaling of future climate projections at the case-study scale and their transfer to the Partners”. The aim of M3.3 is to outline the results of the climate change evaluation over the investigated pilot sites. For the future projections of the climate variables (precipitation and temperature), the data provided by EURO-CORDEX initiative under two emission scenarios (RCP4.5 and RCP8.5) are used. The main information on the pilot sites, available data, analyses and results are presented. The data are freely downloadable from the web repository https://doi.org/10.5281/zenodo.7247977. This project is part of the PRIMA Programme supported by the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No 1923.

This work has been developed under the AGROinLOG Project, “Demonstration of innovative integrated biomass logistics centres for the Agro-industry sector in Europe”. An Integrated Biomass Logistics Center (IBLC), is based on the introduction of new production chains into existing agro-industries by using new biomass feedstock. The AGROinLOG Project has dedicated great attention to investigate the potential of cereal chaff as a valuable resource.Chaff is the fine fraction of the thrashing residues, not usually collected. Chaff is made up of glumes, seed husks, rachis and the tinner part of the cereal stems, whole and cracked kernels, as well as weed seeds.Currently there are several mechanical solutions available on the market for chaff recovery, and others are still at prototype stage, but theyare not so common and very often unknown to the farmers.So far, the literature reportsfew cases of chaff collection with the specific purpose of weed seeds removal, but it still lacks specificexperiments on these machinesintentionally used for biomass collection.For this reason, during the Project AGROinLOG a series of large field tests were performed using an independent scientific approach with different kind of chaff harvesting technologiesin France, Sweden and Italy from 2017 to 2019.The present study collects the results of these activities with the aim to fill that gap and provide deeper understanding in the possibility to enhance the current cereal harvesting method, in order to improve the quantity of biomass collected by including the chaff. Proceedings of the 29th European Biomass Conference and Exhibition, 26-29 April 2021, Online, pp. 62-68

In the pursuit of creating efficient CdTe p-n homojunctions, we developed iodine (I) n-type doped CdTe using Cadmium Iodide (CdI2) as a dopant in varying concentrations (1018 cm-3, 1019 cm-3 and 1020 atoms·cm-3 target concentrations) in CdTe. Iodide doped crystals were grown using a Modified Vertical Bridgman furnace (MVB). Single crystals were characterized using XRD (X-Ray Diffraction), Hall effect, IR (Infrared) Microscopy, UV-VIS-NIR (Ultraviolet-Visible-Near infrared Spectroscopy) and FTIR (Fourier Transform Infrared Spectroscopy). Partners at the National Renewable Energy Laboratory (NREL) also provided data for Hall Effect and Two Photon Excitation Time Resolved Photoluminescence (2PE TRPL) of wafers and films. Photoluminescence mapping (PL mapping) was obtained from Klar scientific, and glow discharge mass spectrometry (GDMS) for purity and final doping concentration was obtained from the National Research Council Canada. Due to poor carrier properties in the crystals as-grown, two annealing treatments were explored, in either tellurium or cadmium vapor. Homojunctions were made at NREL by depositing n-type films from these crystals on p-type single crystals, CdTe:P grown and WSU. The n-type films were created using the close-space sublimation epitaxy (CSSE) process. Herein is reported the results of the grown CdTe:I crystals and, to a lesser extent, the properties of the CdTe:I thin films formed by CSSE.

The recent dispositions related to the energy performance of buildings, launched by the European Directives 2002/91/EC and 2010/31/EU, turned attention to the Energy Performance Certificate (EPC). The aim of this study is to investigate the economic effects of the recent Italian statutory provisions related to energy performance of buildings on listing behaviour. With this aim an hedonic regression analysis is performed, in order to measure the impact of EPC level on listing prices. The study, based on a set of more than 500 housing property asset collected in 2012 from real estate advertisements websites, is focused on the Turin real estate market as a case study. Furthermore this paper contributes to the early limited literature on implication of the impact of EPC level on Italian housing market, representing one of the first systematic evidence about the energy certifications in the housing listing prices. Aestimum, Aestimum 65 (2014)

Earth observation (EO) data are useful tools to analyse geomorphological processes, among which slow-moving landslides triggered by rainfall. EO data are also used to evaluate climate change and to assess its impact on geomorphological processes and geo-hydrological phenomena. The latter is the topic of the Project OT4Clima (Innovative Earth Observation technologies to study Climate Change and its impact on the environment) joined by CNR-IRPI within a consortium that includes other CNR institutes, universities and private companies. The OT4CLIMA project moves from the awareness that the impacts of climate change on the environment need to be better observed, understood, and modelled, especially at a regional scale, in order to put in place appropriate and effective risk mitigation strategies. Within the project, the CNR-IRPI group works on the development of rigorous methods and procedures for evaluating the impact of climate and its change on landslides, in particular on those characterized by a slow cinematic, at a regional scale. The test site is represented by four catchments located in the Basilicata region, southern Italy, namely the basins of the Bradano, Basento, Agri, and Sinni rivers. Long-term rainfall series gathered from 22 rain gauges located in the four catchments are analysed to evaluate the presence of temporal trends. To this aim, non-parametric and statistical tests are applied to the series. Historical landslide information is gathered from the analysis of the IFFI (Inventario dei Fenomeni Franosi in Italia) database, the Idrogeo platform (https://idrogeo.isprambiente.it/app/) and the AVI (Aree Vulnerate in Italia) catalogue. Only some types of landslide movements are considered, namely rotational-translational slides, slow slides/flows, complex movements. Moreover, Copernicus Sentinel-1 images are employed to detect the spatial and temporal distribution of slow earth surface deformations. The obtained results are used for checking the completeness of the landslide inventories. More in detail, the deformation maps of the test site are obtained by means of the application of the SBAS (Small BAseline Subset) technique to three datasets of Sentinel-1 images: t146 ascending orbit and t51 and t124 descending orbits, for the period 2015-2020. Then, a comparative analysis of rainfall data with displacement series is carried out with the aim of identifying clusters of satellite measurements with homogeneous behaviour likely correlated to variations in the rainfall regime. In particular, only the points with a mean velocity in the observation higher than 0.1 cm/year are considered to be moving. Moreover, only the displacement series of points located in areas mapped as landslides - as for the historical inventories - and sited within the influence regions of each rain gauge in the study area are analysed. A 10-km circular buffer centred in the stations are used to define the influence region of each station. The displacement series are analysed and compared to the rainfall series to search for correlations and to evaluate the effects of climate drivers on slow moving landslides.

Bio-based and biodegradable plastics (BBPs) are innovative materials, wholly or partially produced from biomass, with the potential to enhance the circulation of resources in the biological cycle of the Ellen MacArthur Foundation’s butterfly diagram. Although BBPs are generally considered more environmental-friendly than conventional plastics, robust scientific evidence is still missing. The lack of tools and metrics to assess the circularity and sustainability of the BBPs industry poses relevant challenges for its upscaling and contribution to climate neutrality goals in Europe. It calls for adopting system and life cycle thinking, guided by multi-level and multi-dimensional examinations, which led researchers to build a comprehensive picture of trends, gaps and future orientations that may boost a sustainable circular bioeconomy in the sector. The value- chain based and multi-faceted SWOT analysis that emerged from the intersection of system and corporate data reveals the need to establish a combined circular bioeconomy strategy where incentives to integrated local supply chain, dedicated EPR scheme, eco-design guidelines, revised EoL standards, new clear labelling schemes and harmonised sustainability criteria should be prioritized and conjointly pursued to accelerate the transition towards a sustainable circular bioeconomy of the BBPs value chain. European Journal of Social Impact and Circular Economy, V. 4 N. 2 (2023)