• Energy Research
• Open Access close
• Embargo close
• 6. Clean water close
• GB close
• DE close
• IT close

This dataset contains time series of reservoir releases (including any spills), evaporation loss, and rule curves for the Pong and Bhakra reservoirs, India. {"references": ["https://doi.org/10.3390/w11071413", "https://doi.org/10.1016/j.scitotenv.2019.06.021"]}

Hydrochar, carbon-rich material produced during the thermochemical processing of biomass, is receiving increased attention due to its potential value as soil amendment. It can increase agroforestry systems’ productivity through direct and indirect effects on growth and soil quality. Hydrochar may also directly help mitigate climate change by sequestering stable carbon compounds in the soil and perhaps indirectly through increased C uptake by trees. In this research, we aim to evaluate how the application of hydrochar produced by two feedstock types, Cynara cardunculus L. (Hc) residuals and sewage sludge (Hs), and in two different doses (3 and 6 kg m−2) could improve the growth and water use efficiency of Populus alba L., a fast-growing tree species largely used in agroforestry as bioenergy crops and in C sequestration. We considered five plants per treatment, and we measured apical growth, secondary growth, leaf area and intrinsic water use efficiency in each plant for the whole growing season from February to October 2022. Our results highlighted that hydrochar applications stimulate the growth and water use efficiency of plants and that the double dose (6 kg m−2) of both hydrochars, and particularly Hc, had positive effects on plant performance, especially during extremely hot periods. Indeed, the year 2022 was characterized by a heat wave during the summer period, and this condition allowed us to evaluate how plants, growing in soils amended with hydrochar, could perform under climate extremes. Our findings showed that the control plants experienced severe damage in terms of dried stems and dried leaves during summer 2022, while hydrochar applications reduced these effects.

Hydrothermal carbonization (HTC) provides an attractive alternative method for the treatment of high-moisture waste and, in particular, digested sludge. HTC could reduce the costs and environmental risks associated with sludge handling and management. Although it is recognized that the dewaterability of hydrochars produced from digested sludge, even at mild temperatures (180–190 °C), is highly improved with respect to the starting material, the filterability of HTC slurries for the recovery of the solid material (hydrochar) still represents a challenge. This study presents the results of an investigation into the filterability of agro-industrial digested sludge HTC slurries produced by a C-700 CarboremTM HTC industrial-scale plant. The filterability of HTC slurries, produced at 190 °C for 1 h, with the use of acid solutions of hydrochloric acid, sulfuric acid or citric acids, was investigated by using a semi-industrial filter press. The use of sulfuric acid or citric acid solutions, in particular, significantly improved the filterability of HTC slurries, reducing the time of filtration and residual moisture content. The acid treatment also promoted the migration of heavy metals and phosphorus (P) in the HTC filtrate solution. This study demonstrates that P can be recovered via the precipitation of struvite in high yields, recovering up to 85 wt% by mass of its initial P content.

Daily rainfall is measured as the total (mm) over the 24-hour period 0900 to 0900 GMT. It includes all precipitation - snow, rain, mist and fog. Rainfall was first recorded at Rothamsted in March 1853, using a copper funnel rain gauge (5 inch / 12.7 cm diameter) and measured using a graduated cylinder. Since 2004 it has been measured using an electronic tipping bucket rain gauge (10 inch / 25.4cm diameter), ARG100, calibrated to tip at 0.2mm (which has since become the minimum amount of rain that can be recorded). The rain gauge is placed within a 30cm deep 1.5m radius turf wall, retained by brick, to reduce wind eddies that may potentially blow rain out of the gauges. Data were collected daily manually until 2004 and since then by Automatic Weather Station using a standard protocol. There are differences in the capture rate between the two gauges, see Rainfall for further information. The monthly summary data contained in this spreadsheet are derived from daily data measured at Rothamsted Meteorological Station, Harpenden. Total monthly data is determined from daily data using Genstat 19th Edition. Verification includes checks for instrument errors, for missing data and outliers. The original raw daily data is available, after registering, from the e-RA database. Please contact the e-RA Curators for an access password and further details. This dataset represents the mean monthly rainfall recorded at Rothamsted from October 1985 - September 2017 and is derived from continuous daily records measured at the site. Location: Rothamsted Meteorological Station, Harpenden, Hertfordshire, England 51.82 N 0.37 W 128 m asl.

Integrated multitrophic aquaculture (IMTA) is a versatile technology emerging as an ecological and sustainable solution for traditional monoculture aquacultures in terms of effluent treatment. Nevertheless, IMTA is still poorly applied in aquaculture industry due to, among other reasons, the lack of effective, low-investment and low-maintenance solutions. In this study, one has developed a practical and low maintenance IMTA-pilot system, settled in a semi-intensive coastal aquaculture. The optimisation and performance of the system was validated using Ulva spp., a macroalgae that naturally grows in the fishponds of the local aquaculture. Several cultivation experiments were performed at lab-scale and in the IMTA-pilot system, in static mode. The specific growth rate (SGR), yield, nutrient removal, N and C enrichment, protein and pigment content were monitored. Ulva spp. successfully thrived in effluent from the fish species sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax) production tanks and significantly reduced inorganic nutrient load in the effluent, particularly, NH4+, PO43− and NO3−. The enrichment of nitrogen in Ulva spp.’s tissues indicated nitrogen assimilation by the algae, though, the cultivated Ulva spp. showed lower amounts of protein and pigments in comparison to the wild type. This study indicates that the designed IMTA-pilot system is an efficient solution for fish effluent treatment and Ulva spp., a suitable effluent remediator.

In the agricultural sector, climate change (CC) affects multiple weather variables at different stages of crop cycles. CC may influence the mean level or affect the distribution of events (e.g., rainfall, temperature). This work evaluates the economic impact of CC-related changes in multiple climatic components, and the resulting uncertainty. For this purpose, a three-stage discrete stochastic programming model is used to represents farm sector of an irrigated area of Italy and to examine the influence of CC on rainfall and on maximum temperature. These variables affect the availability of water for agriculture and the water requirements of irrigated crops. The states of nature, and their change, are defined more broadly than in previous analyses; this allows examining the changes of more climatic variables and crops cultivation. The effect of CC is obtained by comparing the results of scenarios that represent the climatic conditions in the current situation and in the future. The results show that the agricultural sector would seek to lower costs by modifying patterns of land use, farming practices and increasing the use groundwater. The overall economic impact of these changes is small and due primarily to the reduced availability of water in the future. The temperature increase is, in fact, largely offset by the effects of the increase in CO2 levels, which boosts the yield of main crops of the irrigated zone. Therefore, availability and water management becomes a crucial factor to offset the increase of evapotranspiration and of water stress resulting from the increase of temperature. However, the costs of CC are very high for some types of farming, which suffer a large reduction in income.

AbstractThe integration of power plants and desalination systems has attracted increasing attention over the past few years as an effective solution to tackle sustainable development and climate change issues. In this light, this paper introduces a novel modelling and optimization approach for a combined-cycle power plant (CCPP) integrated with reverse osmosis (RO) and multi-effect distillation (MED) desalination systems. The integrated CCPP and RO–MED desalination system is thermodynamically modelled utilizing MATLAB and EES software environments, and the results are validated via Thermoflex software simulations. Comprehensive energy, exergic, exergoeconomic, and exergoenvironmental (4E) analyses are performed to assess the performance of the integrated system. Furthermore, a new multi-objective water cycle algorithm (MOWCA) is implemented to optimize the main performance parameters of the integrated system. Finally, a real-world case study is performed based on Iran's Shahid Salimi Neka power plant. The results reveal that the system exergy efficiency is increased from 8.4 to 51.1% through the proposed MOWCA approach, and the energy and freshwater costs are reduced by 8.4% and 29.4%, respectively. The latter results correspond to an environmental impact reduction of 14.2% and 33.5%. Hence, the objective functions are improved from all exergic, exergoeconomic, and exergoenvironmental perspectives, proving the approach to be a valuable tool towards implementing more sustainable combined power plants and desalination systems.

Natural potentials for future cropland expansion The potential for the expansion of cropland is restricted by the availability of land resources and given local natural conditions. As a result, area that is highly suitable for agriculture according to the prevailing local biophysical conditions but is not under cultivation today has a high natural potential for expansion. Policy regulations can further restrict the availability of land for expansion by designating protected areas, although they may be suitable for agriculture. Conversely, by applying e.g. irrigation practices, land can be brought under cultivation, although it may naturally not be suitable. Here, we investigate the potentials for agricultural expansion for near future climate scenario conditions to identify the suitability of non-cropland areas for expansion according to their local natural conditions. We determine the available energy, water and nutrient supply for agricultural suitability from climate, soil and topography data, by using a fuzzy logic approach according to Zabel et al. (2014). It considers the 16 globally most important staple and energy crops. These are: barley, cassava, groundnut, maize, millet, oil palm, potato, rapeseed, rice, rye, sorghum, soy, sugarcane, sunflower, summer wheat, winter wheat. The parameterization of the membership functions that describe each of the crops’ specific natural requirements is taken from Sys et al. (1993). The considered natural conditions are: climate (temperature, precipitation, solar radiation), soil properties (texture, proportion of coarse fragments and gypsum, base saturation, pH content, organic carbon content, salinity, sodicity), and topography (elevation, slope). As a result of the fuzzy logic approach, values in a range between 0 and 1 describe the suitability of a crop for each of the prevailing natural conditions at a certain location. The smallest suitability value over all parameters finally determines the suitability of a crop. The daily climate data is provided by simulation results from the global climate model ECHAM5 (Jungclaus et al. 2006) for near future (2011-2040) SRES A1B climate scenario conditions. Soil data is taken from the Harmonized World Soil Database (HWSD) (FAO et al. 2012), and topography data is applied from the Shuttle Radar Topography Mission (SRTM) (Farr et al. 2007). In order to gather a general crop suitability, which does not refer to one specific crop, the most suitable crop with the highest suitability value is chosen at each pixel. In addition the natural biophysical conditions, we consider today’s irrigated areas according to (Siebert et al. 2013). We assume that irrigated areas globally remain constant until 2040, since adequate data on the development of irrigated areas do not exist, although it is likely that freshwater availability for irrigation could be limited in some regions, while in other regions surplus water supply could be used to expand irrigation practices (Elliott et al. 2014). However, it is difficult to project where irrigation practices will evolve, since it is driven by economic investment costs that are required to establish irrigation infrastructure. In principle, all agriculturally suitable land that is not used as cropland today has the natural potential to be converted into cropland. We assume that only urban and built-up areas are not available for conversion, although more than 80% of global urban areas are agriculturally suitable (Avellan et al. 2012). However, it seems unlikely that urban areas will be cleared at the large scale due to high investment costs, growing cities and growing demand for settlements. Concepts of urban and vertical farming usually are discussed under the aspects of cultivating fresh vegetables and salads for urban population. They are not designed to extensively grow staple crops such as wheat or maize for feeding the world in the near future. Urban farming would require one third of the total global urban area to meet only the global vegetable consumption of urban dwellers (Martellozzo et al. 2015). Thus, urban agriculture cannot substantially contribute to global agricultural production of staple crops. Protected areas or dense forested areas are not excluded from the calculation, in order not to lose any information in the further combination with the biodiversity patterns (see chapter 2.3). We use data on current cropland distribution by Ramankutty et al. (2008) and urban and built-up area according to the ESA-CCI land use/cover dataset (ESA 2014). From this data, we calculate the ‘natural expansion potential index’ (Iexp) that expresses the natural potential for an area to be converted into cropland as follows: Iexp = S * Aav The index is determined by the quality of agricultural suitability (S) (values between 0 and 1) multiplied with the amount of available area (Aav) for conversion (in percentage of pixel area). The available area includes all suitable area that is not cultivated today, and not classified as urban or artificial area. The index ranges between 0 and 100 and indicates where the conditions for cropland expansion are more or less favorable, when taking only natural conditions into account, disregarding socio-economic factors, policies and regulations that drive or inhibit cropland expansion. The index is a helpful indicator for identifying areas where cropland expansion could take place in the near future. Further information Detailled information are available in the following publication: Delzeit, R., F. Zabel, C. Meyer and T. Václavík (2017). Addressing future trade-offs between biodiversity and cropland expansion to improve food security. Regional Environmental Change 17(5): 1429-1441. DOI: 10.1007/s10113-016-0927-1 Contact Please contact: Dr. Florian Zabel, f.zabel@lmu.de, Department für Geographie, LMU München (www.geografie.uni-muenchen.de) This research was carried out within the framework of the GLUES (Global Assessment of Land Use Dynamics, Greenhouse Gas Emissions and Ecosystem Services) Project, which has been supported by the German Ministry of Education and Research (BMBF) program on sustainable land management (grant number: 01LL0901E).