• Energy Research
• Open Access close
• Restricted close
• Open Source close
• IT close
• EU close

The phenomena of climate change transcend all national and regional boundaries. To address this complex challenge, we must determine the areas of the country of interest, in this case, Greece, that have been most adversely affected by climate. Greece is surrounded by water, and a significant part of its GDP is derived from the marine and maritime industries, including tourism. Since the start of the IntelComp project, a Preparatory Living Lab (PLL) has been planned and delivered, feeding into the development of the IntelComp platform and the Living Lab on Climate Change Adaptation. The study's results lead to the conclusion that one of the most important challenges in tackling climate change is the decarbonisation challenge, specifically the shift to renewable energy sources and the investments that must be made. Several EU and national policy frameworks, including the European Green Deal, the Climate Law, the National Long-term Strategy for 2050 (on the Climate and Energy), highlight the decarbonisation as one of the major challenges in the climate change pledge. This will be the primary subject of the IntelComp climate change case study. PLLs also led to the identification of policy questions and useful data sources to aid the IntelComp project's launch. While previous research on co-production has primarily focused on involving citizens through public participation processes in order to gain their support, trust, and insights in structured decision-making processes, our approach opens a new channel for incorporating external knowledge into problem-solving processes. The IntelComp project will aid in policy development by providing pertinent tools co-developed with the final users that will provide insights and analysis in the field of STI (Science, Technology, Innovation) encompassing all of the Energy areas mentioned above.

Environment preservation, energy, and the growing economy are becoming strongly interconnected themes requiring new solutions to be exploited. An example of this interconnection is the demand for the development of almost zero-energy buildings, i.e. buildings capable to be almost autonomous from external energy supply or at least not dependent on the energy supply from utilities. The actual conception of a zero energy building is a very complex system formed by several subsystems, with the consequence that costs are very high and reliability relatively low. The aim of this research program is to deepen the possibility to employ the Stirling engine and cooler technology to lower the number of components required in a near zero-energy building, increase the efficiency, and contemporary raise the reliability of the overall system. Stirling cooler could be used to convert mechanical work into heating and cooling effects and produce the temperature difference by the expanding and compressing the working fluid. A similar concept of the Stirling cooler could also be adopted to develop a heat pump. Compared to the traditional vaporcompression refrigeration systems, the Stirling coolers are of higher efficiency and with no components like compressor, expansion valve, evaporator, or condensers. Therefore, they are considered to be clean cooling devices. On the other hand, the Stirling engine is an external combustion engine, which is compatible with a variety of thermal sources, such as solar radiation, waste heat, geothermal energy, combustion, and so on. With the heat input to the hot end of the engine, the Stirling engine could be operated to produce mechanical work/electricity at high thermal efficiency. In principle, the Stirling machines are capable to provide all the forms of energy (heat, cool, and electricity) that form the almost total energy load of a building.

Abstract Building energy performance requirements aiming at the nZEB target have been recently established by the national legislation. In Italy, the requirements are verified through the notional reference building, whose U-values are reduced in two steps: up to 2018 and since 2019 for public buildings, and up to 2020 and since 2021 for all other buildings. This might cause a reduction of the heating need but an increase of the cooling need. The objective of the study is to investigate in which conditions and extent a significant imbalance of the energy needs occurs. Different building types and climatic zones are considered.

For future landscapes to be sustainable, significant changes in land-use and management practices will be needed. This article argues that landscape archaeology can make distinctive contributions t...

Municipal wastewater treatment plants (MWWTPs) are essential infrastructures in any urban context, but they may be considered as a potential source of greenhouse gas (GHG) emissions and should be coherent with European Union (EU) policy on energy efficiency. This study presents a sustainability evaluation of four Italian and Romanian MWWTPs in terms of energy efficiency and greenhouse gas emissions using Energy Performance and Carbon Emissions Assessment and Monitoring (ECAM) tool software. The obtained results indicated that biogas recovery improved energy performances, while the largest contributions in terms of GHG emissions were in all cases caused by energy consumption and methane produced during wastewater treatment. The Romanian plants exhibited higher GHG emissions, compared to the Italian plants, mainly because of the different values of national conversion factors for grid electricity (0.41 kg CO2/kWh for Italy and 1.07 kg CO2/kWh for Romania). Two scenarios aimed at enhancing the overall sustainability were hypothesized, based on increasing the serviced population or energy efficiency, achieving significant improvements. A sustainability assessment of MWWTPs should be adopted as a useful tool to help water utilities to introduce low-energy, low-carbon management practices as well as being useful for policy recommendations.

AbstractIn this paper a preliminary tridimensional CFD analysis is carried out for a future realization of a reduced-scale road tunnel experimental apparatus of 1/50 equipped with different impulsive fans, traditional and alternative. The alternative jet fan is provided of inlet/outlet sections inclined at a fixed pitch angle (α=6°) toward the tunnel floor. Typically, in the experimental scale tunnel model the air flow induced by ventilation system is provided by an external fan and fully developed flow field is considered. In this paper, the authors have simulated a realistic full and reduced-scale tunnel in order to evaluate the influence of ceiling and floor roughness height on the velocity field to identify an appropriate material for a future experimental apparatus.The jet fans are simulated as a simple momentum source. The fan is considered to be infinitely thin and the discontinuous pressure rise (pressure drop) across it is defined as a function of the air velocity through the fan. In order to create a reduced-scale model from a full scale, Froude method is applied to preserve geometrical, kinematical and dynamical similitude. The results, provided in terms of axial velocity profiles in different tunnel sections, show the overlapping between velocity profiles of full scale numerical model with those of the reduced-scale model, for the both ventilation systems.

Economic support policies are widely adopted in European countries in order to promote a more efficient energy usage and the growth of renewable energy technologies. On one hand these schemes allow us to reduce the overall pollutant emissions and the total cost from the point of view of the energy systems, but on the other hand their social impact in terms of economic investment needs to be evaluated. The aim of this paper is to compare the social cost of the application of each incentive with the correspondent CO2 emission reduction and overall energy saving. A Mixed Integer Linear Programming optimization procedure is used to evaluate the effect of different economic support policies on the optimal configuration and operation of a distributed energy supply system of an industrial area located in the north-east of Italy. The minimized objective function is the total annual cost for owning, operating and maintaining the whole energy system. The expectation is that a proper mix of renewable energy technologies and cogeneration systems will be included in the optimal solution, depending on the amount and nature of the supporting policies, highlighting the incentives that promote a real environmental benefit.