• Energy Research
• Closed Access close
• Restricted close
• 13. Climate action close
• 12. Responsible consumption close
• 2. Zero hunger close
• IT close
• FR close

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

The main objective of this paper is to illustrate the current state of the art of the newborn smart gas grid concept. We provide a detailed discussion of the envisaged features of the smart gas grid, giving attention to both the related academic literature and to the ongoing world-wide projects. In doing so, we also discuss the potentialities of rethinking the smart grid paradigm from the perspective of a whole energy system, that both encompasses the electrical and the gas grid, and identify some critical key aspects that must be handled while developing the new smart energy paradigm.

Abstract This paper aims to present a feasibility study of the innovative plant for methanol synthesis from carbon dioxide-sequestered by fossil fuel power plant and hydrogen, which is produced by water electrolyzer employing the over-production on the electrical grid. The thermo-economic analysis is performed in the framework of the MefCO2 H2020 EU project and it is referred to the German economic scenario, properly taking into account the real market costs and cost functions for different components of the plant. Three different plant capacities for methanol production (4000 10,000 and 50,000 ton/year) have been investigated, assuming an average cost for electrical energy to feed electrolysers and analyzing the influence of the most significant parameters (oxygen selling option, methanol selling price and electrolysers’ capital cost) on the profitability of the plant. The analysis has been performed in W-ECoMP, software for the thermo-economic analysis and plant optimization developed by the University of Genoa.

Abstract In recent years living walls have increasingly spread, thus becoming a diffuse architectural envelope cladding technology. Consequently, a more precise understanding of their thermal behavior and impact on the building energy balance are needed. One of the most important effects provided by the use of living walls is the shading of the building envelope, with clear benefits during the cooling period. Furthermore, many features characterize the thermal behavior of living walls, namely plant species, leaf area index (LAI), evapotranspiration, emissivity and air cavity type. All these particular characteristics have been accounted in the mathematical model developed in the frame of the presented research, whose aim is to provide a tool for the prediction of the thermal behavior of living walls. Two kinds of living walls, one with grass and closed air cavity and the other one with vertical garden and open air cavity were considered. The results achieved by means of the developed model show a good agreement with the measurements also supported by model efficiency indexes such as Nash–Sutcliffe efficiency index (NSEC). Values of around 0.7 were obtained for the NSEC index for both the investigated living walls.

Abstract An international workshop was held in Richland, Washington, United States of America, in October, 1980 to discuss progress on development of the acid digestion process for treating combustible nuclear waste. The workshop was attended by participants from nine member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The status of the acid digestion development programs of various countries is discussed in this paper. The acid digestion process has been developed and demonstrated on an engineering scale in several countries and appears to be especially applicable to treatment of combustible wastes containing high levels of transuranic contamination, where there is potential for recovering the transuranic radionuclides. Because the process takes place at a relatively low temperature, the plutonium contained in the residue is in a form that can be readily recovered using standard leaching techniques. The process is adaptable to a wide variety of combustible wastes, such as cellulosics, plastics, rubber materials, and ion exchange resin. While the process has been developed and demonstrated on an engineering scale primarily for transuranic contaminated wastes, the process is also adaptable to beta-gamma wastes such as reactor ion exchange resins.

The paper proposes a critical assessment of municipal solid waste gasification today, starting from basic aspects of the process (process types and steps, operating and performance parameters) and arriving to a comparative analysis of the reactors (fixed bed, fluidized bed, entrained bed, vertical shaft, moving grate furnace, rotary kiln, plasma reactor) as well as of the possible plant configurations (heat gasifier and power gasifier) and the environmental performances of the main commercially available gasifiers for municipal solid wastes. The analysis indicates that gasification is a technically viable option for the solid waste conversion, including residual waste from separate collection of municipal solid waste. It is able to meet existing emission limits and can have a remarkable effect on reduction of landfill disposal option.

Abstract This paper describes the point of view of a gas utility regarding systems for cooling and heating by solid sorption. Indeed, the context is favorable to the emergence of such systems first, of course, due to the regulatory constraints on certain refrigerant fluids, but also for their specific technical characteristics (the storage capacity, for example). The gas utilities have in fact shown an increasingly keen interest in all types of sorption systems, as a way of diversifying natural gas utilization, particularly in the summer. After a review of that context, this paper highlights the advantages of solid sorption and describes the criteria for choosing an installation in air conditioning and cooling production applications. Finally, it discusses the difficulties likely to be encountered in developing sorption systems, as well as the prospects for the future.

Efficiency of energy resource use is a key factor for a sustainable energy future. By matching the exergy levels of supply and demand, Energy Quality Management (EQM) of building energy supply systems may achieve more efficient use of energy resources. Beyond this, environmental impact of energy supply systems is another essential issue. This work addresses the influence of EQM on CO 2 emissions in the operation optimization of a Distributed Energy System (DES). A multi-objective linear programming problem is formulated to reduce energy costs and increase the overall exergy efficiency. Total CO 2 emissions are evaluated for the optimized operation strategies of the DES. The operators of the DES can choose the operation strategy from the Pareto front, based on their priorities and also aware of effects on CO 2 emissions. Results demonstrate more efficient use of energy resources and reduction in CO 2 emissions through EQM, as compared with conventional energy supply systems.