• Energy Research
• Restricted close
• IT close

Starting from an interpretation of “sustainable mobility”, this study describes a possible taxonomy of the modalities of urban travels related to sustainability and it suggests an inclusive approach to implement urban policies for “soft mobility” inside the urban contexts. These policies aim at improving the levels of urban liveability, reducing the polluting emissions and promoting the recovery of a sober moral behaviour in acting and reacting inside the city. The underway photovoltaic bikesharing project “Bene Bike” in Benevento shows how the bike station plays an innovative role. It represents a multifunctional element able of managing material and immaterial “flows of urban travels” (people, energy, information).

Abstract The International Geothermal Association (IGA), founded in 1988, is an international, worldwide, non-profit and non-governmental association whose objective and mission is to promote the research and utilization of geothermal resources, through the compilation, publication, and dissemination of scientific and technical data and information. The Information Committee (IC) of the IGA is responsible for advising the IGA Board on policies concerned with the collection, compilation, publication, exchange and dissemination of geothermal information, including information on utilization, development, technical findings, scientific research, meetings, publications and Association activities. The Committee is also responsible for the implementation of information policies determined by the Board.

Abstract Methane conversion to a rich H2 fuel by reforming reactions is a largely applied industrial process. Recently, it has been considered for applications combined to gas turbine powerplants, as a mean for (I) chemical recuperation (i.e. chemical looping CRGT) and (II) decarbonising the primary fuel and make the related power cycle a low CO2 releaser. The possibility of enhancing methane conversion by the addition of CO2 to the steam reactant flow (i.e. tri-reforming) has been assessed and showed interesting results. When dealing with gas turbines, the possibility of applying tri-reforming is related to the availability of some CO2 into the fluegas going to the reformer. This happens in semi-closed gas turbine cycles (SCGT), where the fluegas has a typical 14–15% CO2 mass content. The possibility of joining CRGT and SCGT technologies to improve methane reforming and propose an innovative, low CO2 emissions gas turbine cycle was assessed here. One of the key issues of this joining is also the possibility of greatly reduce the external water consumption due to the reforming, as the SCGT is a water producer cycle. The SCGT-TRIREF cycle is an SCGT cycle where fuel tri-reforming is applied. The steam due to the reformer is generated by the vaporization of the condensed water coming out from the fluegas condensing heat exchanger, upstream the main compressor, where the exhausts are cooled down and partially recirculated. The heat due to the steam generation is recuperated from the turbine exhausts cooling. The reforming process is partially sustained by the heat recovered from the turbine exhausts (which generates superheated steam) and partially by the auto thermal reactions of methane with fresh air, coming from the compressor (i.e. partial combustion). The effect of CO2 on methane reforming (tri-reforming effect) increases with decreasing steam/methane ratio: at very low values, around 30% of methane is converted by reactions with CO2. At high values of steam/methane ratio, the steam reforming reactions are dominant and only a marginal fraction of methane is interested to tri-reforming. Under optimised conditions, which can be reached at relatively high pressure ratios (25–30), the power cycle showed a potential efficiency around 46% and specific work at 550 kJ/kg level. When the amine CO2 capture is applied, the specific CO2 emissions range between 45 and 55 g CO 2 / kW h .

This paper investigates the energy system of the Basilicata region (southern Italy) to highlight, through a scenario analysis, its possible future development in compliance with the European Commission's long-term vision. The IEA-ETSAP methodology was utilized to model and analyse the Basilicata energy system in a business-as-usual scenario, based on the assumptions of the 2010 Regional Energy and Environmental Policy Plan, and in two low-carbon scenarios, decarbonisation and high energy efficiency, which, in line with the long-term European strategy, foresee an 85% carbon dioxide emission reduction and a 20% energy efficiency increase in 2050. The results highlight that electricity production from renewable energy sources (in particular wind energy), strongly supported by the regional policy, goes beyond the Basilicata Regional Energy-Environmental Plan forecast, with a further increase in the decarbonisation scenarios. In addition, solar thermal and highly efficient technologies are adopted in commercial and residential end-use sectors. An additional 9% reduction in energy consumption is achieved in the high energy efficiency scenario by passive houses. The proposed approach shows the usefulness of a modelling framework typically used for national and supranational analyses to support regional authorities in their decision-making process to obtain results in line with the European and national strategies. Application to the Basilicata region shows the usefulness of a consolidated framework for policy assessment at a local scale to assess regional contribution to the achievement of national climate mitigation targets that tend towards climate neutrality.

European cities are essential actors for transition to a low carbon society on a 2050 horizon. Urban activities account for 80 % of energy consumption in Europe as well as most GHG emissions. The need for a new paradigm based on energy efficiency and saving thus represents both a challenge and an opportunity to local authorities who have to deal with the complexity of urban systems and energy issues. In light of this realization, the Smart Energy Master project conducted by the Department of Civil, Architectural and Environmental Engineering at the University of Naples Federico II aims to develop a model of governance for local energy saving and efficiency. One of the results of this research project is the Urban Saving Energy Model aimed at integrating the different subsystems in which a city can be structured with energy consumption at a neighborhood scale. This paper describes the model in question and some of the results achieved by applying the UrbanSEM to three Naples neighborhoods.

In the last years, the upgrading of wastewater treatment plants (WWTPs) could be required in order to comply with the more stringent regulation requirements. Nevertheless, the main issue is related to the surface availability. A proper solution could be represented by the attached biomass processes, in particular the moving bed biofilm reactors (MBBR), that have a significant footprint reduction with respect to conventional activated sludge (CAS). However, MBBR showed an important disadvantage: the poor aeration energy efficiency due to the use of coarse bubble diffusers, which guarantee high reliability and low maintenance costs with respect to fine bubble ones. Moreover, the presence of carriers inside the reactor emphasizes this aspect. The aim of this work is to verify the benefits achievable by installing a fine bubble aeration system inside a MBBR system. The comparison, in terms of oxygen transfer efficiency, between a medium bubble aeration system and a fine ceramic bubble diffuser was studied and the effect of biofilm growth on oxygen transfer was assessed. Several tests were carried out in order to test the operation of a coarse and a fine bubble side aeration at different air flow rates, both in clean water conditions, in order to evaluate the influence of carriers (Chip M type) on the aeration efficiency, both in wastewater conditions with the aim to assess the effect of bacteria growth on the carriers. The main results are the following: (i) the fine bubble system placed off-center ensured good mixing even without using the mixer; (ii) the fine bubble side aeration system compared to the coarse ones did not show significant advantages in terms of oxygen transfer efficiency; (iii) the increase in specific air flow rate negatively influenced the aeration efficiency; (iv) the presence of biomass had a positive effect on the oxygen transfer yield.

Abstract The management of riparian vegetation which includes cutting operations of grass, reeds, bushes and trees, is very important to reduce hydrogeologic risk. In Tuscany, riparian biomass and residues are mainly left shredded along courses or disposed in landfills as special wastes: actually different laws prohibit that tree trunks are abandoned in areas naturally affected by flooding, because they can be moved contributing to increase the water level and to maximize the hydraulic risk of some other nearby areas. In some cases, it is also possible to store the logs in specified sites from where they can be taken and used as a fuel in fireplaces or domestic heating plants. This work studies the possibility of the reuse of riparian vegetation as biomass for energy production and evaluates benefits and drawbacks from the economical, environmental and managerial points of view. Particularly, a specific methodology has been developed for two hydrological districts of Tuscany, with different typologies and densities of vegetation. First, an estimation of biomass distribution on the land and an evaluation of annual wood availability have been carried out; then, different chains concerning harvesting operation, biomass transport, storage conditions and final utilisation, have been defined and compared by a specific multicriteria analysis (MCA); finally, for the most suitable bio-energy chains the Life Cycle Assessment (LCA) has been implemented. Results of the LCA have also permitted to validate some environmental indicators used in the MCA, as mechanisation level of yards, energy efficiency of plants or transport distances. The decision making tool developed allows to compare costs and environmental benefits of the energy use of riparian vegetation, supporting local authorities involved in energy planning: in this way it is possible to confront different alternatives to match the energy demand and meet the energy saving and sustainability issues at the lowest cost for the community. In conclusion, the most interesting bio-energy chains, based on technology of direct combustion, are those that require a limited forestry mechanisation, the short transport distances and the medium sized plants. The LCA applied to these most suitable chains has also shown significant environmental benefits to promote the energetic use of riparian biomass instead of fossil fuels.

There is strong social and political pressure to reduce pesticide use in European agriculture. Evaluating the sustainability of cropping systems is a complex task due to the conflicting objectives underlying its economic, social and environmental dimensions. Multi-criteria assessment of different Integrated Pest Management (IPM) scenarios and evaluation of the most sustainable options at regional, national and European level is essential. Within the EU Network of Excellence ENDURE, two expert-based surveys were conducted (i.e. interviews), where experts from four European regions (northern region, Denmark and The Netherlands; central-eastern, Tolna and Békés counties in Hungary; south-western, Ebro Valley in Spain; southern, Po Valley in Italy) determined which are the main current maize-based cropping systems (MBCSs) in their region and proposed innovative IPM-based systems. The DEXiPM® (DEXi Pest Management) model for arable cropping systems was used to evaluate and compare the economic and environmental sustainability of these systems. The social sustainability was evaluated by adapting indicators of this model to the specificities of maize systems. The assessments showed that all innovative rotated MBCSs proposed in the four regions can have a higher environmental sustainability than and maintain the same economic sustainability as current rotated systems. These cropping systems are thus acceptable for testing under "real" field conditions. Only the innovative continuous maize system proposed in the central-eastern region was both economically and environmentally more sustainable than the current system. All innovative systems had a positive impact on work safety but according to local expert opinion producers and consumers are not ready to implement them or to accept their higherpriced products, with the exception of consumers in the northern region. These results suggest the need for European and regional policies to encourage the adoption of innovative rotated MBCSs that have positive agronomic and environmental impact through IPM implementation. The major constraints that inhibit this adoption were predominantly relating to (1) the lack of access that farmers have to the practical knowledge needed to effectively manage these systems and (2) the insufficient consumer awareness and acceptance of product improvements associated with IPM. To overcome these constraints supportive policy environments, well-functioning knowledge management systems (including good farmer support networks) and effective marketing is required.