• Energy Research
• 2. Zero hunger close
• 15. Life on land close
• IT close
• Energies close

The cultivation of plants in greenhouses currently plays a role of primary importance in modern agriculture, both for the value obtained with the products made and because it favors the development of highly innovative technologies and production techniques. An intense research effort in the field of energy production from renewable sources has increasingly led to the development of greenhouses which are partially covered by photovoltaic elements. The purpose of this study is to present the potentiality of an innovative prototype photovoltaic greenhouse with variable shading to optimize energy production by photovoltaic panels and agricultural production. With this prototype, it is possible to vary the shading inside the greenhouse by panel rotation, in relation to the climatic conditions external to the greenhouse. An analysis was made for the solar radiation available during the year, for cases of completely clear sky and partial cloud, by considering the 15th day of each month. In this paper, the results show how the shading variation enabled regulation of the internal radiation, choosing the minimum value of necessary radiation, because the internal microclimatic parameters must be compatible with the needs of the plant species grown in the greenhouses.

We analysed the environmental impacts of three biogas systems based on dairy manure, sorghum and maize. The geographical scope of the analysis is the Po valley, in Italy. The anaerobic digestion of manure guarantees high GHG (Green House Gases) savings thanks to the avoided emissions from the traditional storage and management of raw manure as organic fertiliser. GHG emissions for maize and sorghum-based systems, on the other hand, are similar to those of the Italian electricity mix. In crop-based systems, the plants with open-tank storage of digestate emit 50% more GHG than those with gas-tight tanks. In all the environmental impact categories analysed (acidification, particulate matter emissions, and eutrophication), energy crops based systems have much higher impacts than the Italian electricity mix. Maize-based systems cause higher impacts than sorghum, due to more intensive cultivation. Manure-based pathways have always lower impacts than the energy crops based pathways, however, all biogas systems cause much higher impacts than the current Italian electricity mix. We conclude that manure digestion is the most efficient way to reduce GHG emissions; although there are trade-offs with other local environmental impacts. Biogas production from crops; although not providing environmental benefits per se; may be regarded as an option to facilitate the deployment of manure digestion.

Extensive surfaces of land are currently under-utilized, marginal and/or contaminated (MUC) in many EU and neighbouring countries. In the past few years, scientific research has demonstrated that bioenergy crops can potentially render this land profitable, generating income for the local populations and, at the same time, reaching the goals of the new Renewable Energy Directive (REDII) without interfering with food production. The main purpose of this paper is to measure net economic returns by computing benefits and costs of low indirect Land Use Change (iLUC) biofuel production on MUC land from the perspective of both the private investors and social welfare. A standard cost-benefit technique was applied to analyse and compare net returns of different advanced bioenergy value-chains in monetary terms. Productivity, economic feasibility and green-house gas (GHG) emissions impact were assessed and considered for the economic analysis. The considered pathways were cellulosic or second generation (2G) ethanol from Giant reed (Arundo donax) in Italy, electricity from miscanthus, biochemicals from spontaneous grass and cultivated Lucerne (Alpha-alfae) with sorghum for biomethane in Germany, and 2G ethanol from Willow (Salix viminalis) in Ukraine. For the risk assessment, Monte Carlo simulation was applied. The results indicated that in Italy and Ukraine, although the production of 2G ethanol would allow positive net yearly margins, the investments will not be profitable compared to the baseline scenarios. In Germany, the work showed good profitability for combined heat and power (CHP) and biochemicals. On the other hand, investments in biomethane showed negative results compared with the baseline scenarios. Finally, the Monte Carlo simulation enabled us to identify the range of possible economic results that could be attained once volatility is factored in. While for Italy the likelihood of yielding positive results remains lower than 20 percent, case studies in Ukraine and Germany showed higher certainty levels, ranging from 49 to 91 percent.

Dairy cattle farms are continuously developing more intensive systems of management which require higher utilization of durable and not-durable inputs. These inputs are responsible of significant direct and indirect fossil energy requirements which are related to remarkable emissions of CO2. This study aims to analyze direct energy requirements and the related carbon footprint of a large population of conventional dairy farms located in the south of Italy. A detailed survey of electricity, diesel and Liquefied Petroleum Gas (LPG) consumptions has been carried out among on-farm activities. The results of the analyses showed an annual average fuel consumption of 40 kg per tonne of milk, while electricity accounted for 73 kWh per tonne of milk produced. Expressing the direct energy inputs as primary energy, diesel fuel results the main resource used in on-farm activities, accounting for 72% of the total fossil primary energy requirement, while electricity represents only 27%. Moreover, larger farms were able to use more efficiently the direct energy inputs and reduce the related emissions of carbon dioxide per unit of milk produced, since the milk yield increases with the herd size. The global average farm emissions of carbon dioxide equivalent, due to all direct energy usages, accounted for 156 kg CO2-eq per tonne of Fat and Protein Corrected Milk (FPCM), while farms that raise more than 200 heads emitted 36% less than the average value. In this two-part series, the total energy demand (Part 1 + Part 2) per farm is mainly due to agricultural inputs and fuel consumption, which have the largest quota of the annual requirements for each milk yield class. These results also showed that large size farms held lower CO2-eq emissions when referred to the mass of milk produced.

Biomass occupies a very important place among renewable energy sources, and the residual biomass recovery chain represents a sector of fundamental importance. Our work focused on the production of pellets by pruning residues from two of the most important woody crops in Italy: hazelnut and olive groves. We found a higher value of bulk density for the hazelnut pellet (581.30 kg m−3 vs. 562.38 kg m−3) and a higher value of length for the olive pellet (16.66 mm vs. 10.47 mm). The percentages of durability were very similar (98%). The low heating value and ash content of hazelnut and olive were 17.21 MJ kg−1 and 3.1%, and 16.83 MJ kg−1 and 2.5%. A higher concentration of Cu, Pb, and Ni was observed in the hazelnut. The contrary was observed for the concentration of Zn. N content was 0.77% and 1.24% for the hazelnut and the olive, respectively. The concentration of S was 0.00% for both. The quality parameters that do not meet current standards could be improved by mixing these materials with different types of wood.

Groundwater Heat Pumps (GWHPs) are increasingly adopted for air conditioning in urban areas, thus reducing CO2 emissions, and this growth needs to be managed to ensure the sustainability of the thermal alteration of aquifers. However, few studies have addressed the propagation of thermal plumes from open-loop geothermal systems from a long-term perspective. We provide a comprehensive sensitivity analysis, performed with numerical finite-element simulations, to assess how the size of the thermally affected zone is driven by hydrodynamic and thermal subsurface properties, the vadose zone and aquifer thickness, and plant setup. In particular, we focus the analysis on the length and width of thermal plumes, and on their time evolution. Numerical simulations are compared with two simplified methods, namely (i) replacing the time-varying thermal load with its yearly average and (ii) analytical formulae for advective heat transport in the aquifer. The former proves acceptable for the assessment of plume length, while the latter can be used to estimate the width of the thermally affected zone. The results highlight the strong influence of groundwater velocity on the plume size and, especially for its long-term evolution, of ground thermal properties and of subsurface geometrical parameters.