• Energy Research
• Closed Access close
• Open Source close
• JP close
• KR close

This paper presents a multi-objective optimization model for a long-term generation mix in Indonesia. The objective of this work is to assess the economic, environment, and adequacy of local energy sources. The model includes two competing objective functions to seek the lowest cost of generation and the lowest CO2 emissions while considering technology diffusion. The scenarios include the use of fossil reserves with or without the constraints of the reserve to production ratio and exports. The results indicate that Indonesia should develop all renewable energy and requires imported coal and natural gas. If all fossil resources were upgraded to reserves, electricity demand in 2050 could be met by domestic energy sources. The maximum share of renewable energy that can be achieved in 2050 is 33% with and 80% without technology diffusion. The least cost optimization produces lower generation costs than the least CO2 emissions, as well as the combined scenario. Total CO2 emissions in 2050 are five to six times as large as current emissions. The least CO2 emissions scenario can reduce almost half of the CO2 emissions of the least cost scenario by 2050. The proposed multi-objective optimization model leads some optimal solutions for a more sustainable electricity system.

Conventionally assessing of turbine performance was done by conducting model experiments which at times become costly and time consuming for several design alternatives in design optimization. Recently, computational fluid dynamics (CFD) has become a more cost effective tool for predicting detailed flow information in turbine space to enable the selection of the best design. With the growth of computational mechanics, the virtual hydraulic machines are becoming more and more realistic to get minor details of the flow, which are not possible in model testing. The inverse design technique and fully 3-dimensional flow simulations were performed early to manufacture the newly developed runner. It allows a quick and efficient improvement and optimization of turbine components. The system has been applied to the optimization of a Francis turbine runner for a turbine replacement project. In present work, 3D turbulent real flow analyses in hydraulic Francis turbine have been carried out at four guide vane opening at constant rotational speed using Ansys CFX computational fluid dynamics (CFD) software. The newly developed runner from reverse engineering and CFD results show an enhanced performance. The average values of flow parameters like velocities and flow angles at the inlet and outlet of runner, guide vane and stay vane of turbine are computed to derive flow characteristics. The aim was to analyze the flow behavior and pressure distribution to further fine-tune the whole numerical experiment to achieve the level of accuracy necessary for the concept design of a revitalized turbine. The obtained results are in good agreement with the in site experiments, especially for the characteristic curve.

Abstract International politics affects the oil trade. But do financial and commercial traders who participate in spot oil trading also respond to changes in international politics? We construct a firm-level dataset for all U.S. oil-importing companies over 1986–2008 to examine how these firms respond to increases in “political distance” between the U.S. and her trading partners, measured by divergence in their UN General Assembly voting patterns. Consistent with previous macro evidence, we first show that individual firms diversify their oil imports politically, even after controlling for unobserved firm heterogeneity. However, the political pattern of oil imports is not entirely driven by the concerns of hold-up risks, which exist when oil transactions via term contracts are associated with backward vertical FDI that is subject to expropriation. In particular, our results indicate that even financial and commercial traders significantly reduce their oil imports from U.S. political enemies. Interestingly, while these traders diversify their oil imports politically immediately after changes in international politics, other oil companies reduce their oil imports with a significant time lag. Our findings suggest that in designing regulations to avoid harmful repercussions on commodity and financial assets, policymakers need to understand the nature of political risk.

Thermochemical reactions viz. combustion and pyrolysis are important processes in the conversion of biomass from agricultural wastes into functional materials activated carbon fibre (ACF). Acid treatment during combustion and pyrolysis leaves a major impact which affects quality and properties of the resulting ACF such as pore size control and surface area enlargement. In this study, carbonisation and activation of empty fruit bunch (EFB) fibre into ACF was carried out using acid treatment assisted combustion and pyrolysis followed by CO2 gas flow. The effects of acid treatment on the physicochemical properties and pore characteristics was studied by applying sulphuric acid and switching the sequence of acid treatment before and after combustion and pyrolysis. Intercalation of sulphuric acid and exfoliation reactions on the acid-treated EFB fibre resulted in a higher thermal degradation rate compared to raw EFB fibre without acid treatment. Higher BET surface area and total pore volume were obtained for ACF samples treated with acid. The higher pore volume is due to the intercalated sulphuric compound which facilitated the removal of volatile matter and generated more pores for adsorption. However, severe acid oxidation could also lead to pore blocking with excess oxygen complexes and creation of limited porosity. The results show that properties of the ACF can be affected by the sequence of the acid treatment depending on the thermochemical process applied.

Abstract Light wells in the centers of high-rise apartment buildings in Japan are called ‘Voids’. Gas water-heaters built into Voids discharge exhaust gas so a large enough opening has to be designed at the bottom of a Void to keep the indoor air quality (IAQ) acceptable. In order to secure the IAQ in the Void from contamination, a simple calculation method of the ventilation rate induced by wind force and thermal buoyancy through openings at the bottom, along with heat sources such as water-heaters, is presented. The accuracy of this calculation method was examined by wind tunnel testing. As a result, it turned out that the simple calculation methods introduced in this study were valid for predicting the vertical temperature distribution and ventilation rates in Voids.

This paper presents experimental results of the impact of CO(2) co-feed on a gasification/pyrolysis process for various feedstocks (biomass, coal, and municipal solid waste (MSW)). Various feedstocks were thermo-gravimetrically characterized under various atmospheric conditions and heating rates. A substantial amount of char burn out was identified in the presence of CO(2) via a series of thermo-gravimetric analysis tests, which enabled high conversion of final mass (approximately 99%) to be achieved. The impact of CO(2) co-feed on the volatilization regime during the pyrolysis/gasification process was not apparent at a heating rate of 10-40 degrees C min(-1). However, the impact of CO(2) on the volatilization regime at a fast heating rate (950 degrees C min(-1)) was substantial. For example, significant enhancement in the generation of CO, by a factor of approximately 2, was observed in the presence of CO(2). The generation of major chemical species, such as CH(4) and C(2)H(4), were enhanced, but this was not as apparent as in the case with CO. In addition, introducing CO(2) to the pyrolysis/gasification process enabled the amount of condensable liquid hydrocarbons, such as tar (approximately 30-40%) to be significantly reduced in the presence of CO(2), in that injecting CO(2) into the pyrolysis/gasification process expedites cracking the volatilized chemical species. Experimental work confirmed that biomass and MSW could be feasible and desirable feedstocks for the pyrolysis/gasification process as these feedstocks can be easily treated compared to coal. To extend this understanding to a more practical level, various feedstocks were tested in a tubular reactor and drop tube reactor under various experimental conditions.

Abstractπ‐Conjugated polyelectrolytes (CPEs) have been studied as interlayers on top of a separate hole transport layer (HTL) to improve the wetting, interfacial defect passivation, and crystal growth of perovskites. However, very few CPE‐based HTLs have been reported without rational molecular design as ideal HTLs for perovskite solar cells (PeSCs). In this study, the authors synthesize a triphenylamine‐based anionic CPE (TPAFS‐TMA) as an HTL for p‐i‐n‐type PeSCs. TPAFS‐TMA has appropriate frontier molecular orbital (FMO) levels similar to those of the commonly used poly(bis(4‐phenyl)‐2,4,6‐trimethylphenylamine) (PTAA) HTL. The ionic and semiconducting TPAFS‐TMA shows high compatibility, high transmittance, appropriate FMO energy levels for hole extraction and electron blocking, as well as defect passivating properties, which are confirmed using various optical and electrical analyses. Thus, the PeSC with the TPAFS‐TMA HTL exhibits the best power conversion efficiency (PCE) of 20.86%, which is better than that of the PTAA‐based device (PCE of 19.97%). In addition, it exhibits negligible device‐to‐device variations in its photovoltaic performance, contrary to the device with PTAA. Finally, a large‐area PeSC (1 cm2) and mini‐module (3 cm2), showing PCEs of 19.46% and 18.41%, respectively, are successfully fabricated. The newly synthesized TPAFS‐TMA may suggest its great potential as an HTL for large‐area PeSCs.

Cogeneration plants, which simultaneously produce electricity and heat energy, have been introduced increasingly for commercial and domestic applications in Korea because of their energy efficiency. The optimal plant configuration of a specific commercial building can be determined by selecting the sizes and the number of cogeneration systems and the auxiliary equipment based on the annual demands of electricity, heating and cooling. In this study, a mixed-integer, linear programming, utilizing the branch and bound algorithm was used to obtain the optimal solution. Both the optimal configuration system equipment and the optimal operational mode were determined based on the annual cost method for the installation of a cogeneration system to a hospital and a group of apartments in Seoul, Korea. In addition, the economic evaluation for the optimal cogeneration system depending on the fuel tariff system was calculated. A short payback period and higher internal rate of return on the initial investment were found to be essential for the adoption of cogeneration plants to hospitals and apartments.