• Energy Research
• engineering and technology close
• 13. Climate action close
• 11. Sustainability close
• 9. Industry and infrastructure close
• KR close

Abstract Limiting the increase of global temperature requires electrification of the railway transport, which is relatively a distinct mode of transport in terms of economy, business and socialization of a country. However, battery complemented railway transport systems such as fuel cell hybrid railway propulsion systems are constrained by the high cost of the battery, and suboptimal performance of the fuel cell under varying loads. Optimized selection of battery can reduce its costs associated with sizing, life and utilization. Similarly, managing the load distribution between the battery and fuel cell can reduce the load variations concern for fuel cell. In this study, model-based selective characterization of the battery and fuel cell is done to identify the optimal features and constraints. Following characterization, the load allocation to battery and fuel cell is determined with the targets of collaborative utilization of optimal features and mitigation of constraints. Subsequently, considering this load allocation and results of characterization, conditions are proposed for reliable sizing and optimized selection of battery. The significance of the proposed conditions in reliable sizing is explored. Based on these conditions, certain commercially developed batteries are evaluated for optimized selection of battery. The results signify this study as a foundation for research on the reliable sizing and optimized selection of battery in fuel cell hybrid railway propulsion systems.

The current status and challenges associated with the production and utilization of cellulosic ethanol in Korea are reviewed in this paper. Cellulosic ethanol has emerged as a promising option for mitigating Korea's CO(2) emissions and enhancing its energy security. Korea's limited biomass resources is the most critical barrier to achieving its implementation targets for cellulosic ethanol. Efforts to identify new suitable biomass resources for cellulosic ethanol production are ongoing and intensive. Aquatic biomasses including macroalgae and plantation wastes collected in the Southeast Asia region have been found to have great potential as feedstocks for the production of cellulosic ethanol. R&D explorations into the development of technologies that can convert biomass materials to ethanol more efficiently also are underway. It is expected that cellulosic ethanol will be in supply from 2020 and that, by 2030, its use will have effectively reduced Korea's total gasoline consumption by 10%.

As smart cities become a global topic, interest in smart mobility, the core of smart cities, is also growing. The technology that comes closest to general users is “autonomous driving”. In particular, the successful market entry and establishment of some private companies proved that “autonomous driving” is not technology of the future but imminent reality. However, safety in autonomous vehicles that rely on sensors instead of the driver’s five senses has been the focus of attention from the beginning and continues to be so. In this study, we attempted to counter this interest. Based on the actual data of thirty traffic accidents, assuming the AEBS (Autonomous Emergency Braking System) was installed to assist the driver in safe driving, it was reinterpreted through simulation to see what changes occurred in the accident. In the computer program, PC-Crash, the results were first analyzed through simulation using Euro NCAP (New Car Assessment Program)’s AEBS test standards. Subsequently, the other variables in the AEBS were controlled and the accident was reinterpreted by changing only the angle of the radar detection sensor. As a result, it was confirmed that a total of 27 accidents out of thirty accidents could have been prevented with the AEBS. In addition, it proved that the crash avoidance rate of vehicles gradually increased as the radar angle increased.

AbstractThe penetration of financialization into the biocultural geographies of islands builds upon processes of commodification and privatization of environments, entailing enclosures of resource commons, environmental destruction and displacement of people, their livelihoods, knowledge and practices, with implications for sustainability. Against this background I critique the growing literature on acronym models of island development, arguing for more careful consideration of issues concerning democracy, human rights and sustainability. Drawing on the ‘right to the city’ literature, I highlight the importance of the ‘right to the island’ in an effort to move beyond the policy imperatives of MIRAB, SITE and PROFIT. Exercising the right to the island involves cultivating radically pluralistic democracy through struggles for alternative island futures. In so doing it problematizes what it means to develop and achieve sustainability.

This paper presents experimental results of the impact of CO(2) co-feed on a gasification/pyrolysis process for various feedstocks (biomass, coal, and municipal solid waste (MSW)). Various feedstocks were thermo-gravimetrically characterized under various atmospheric conditions and heating rates. A substantial amount of char burn out was identified in the presence of CO(2) via a series of thermo-gravimetric analysis tests, which enabled high conversion of final mass (approximately 99%) to be achieved. The impact of CO(2) co-feed on the volatilization regime during the pyrolysis/gasification process was not apparent at a heating rate of 10-40 degrees C min(-1). However, the impact of CO(2) on the volatilization regime at a fast heating rate (950 degrees C min(-1)) was substantial. For example, significant enhancement in the generation of CO, by a factor of approximately 2, was observed in the presence of CO(2). The generation of major chemical species, such as CH(4) and C(2)H(4), were enhanced, but this was not as apparent as in the case with CO. In addition, introducing CO(2) to the pyrolysis/gasification process enabled the amount of condensable liquid hydrocarbons, such as tar (approximately 30-40%) to be significantly reduced in the presence of CO(2), in that injecting CO(2) into the pyrolysis/gasification process expedites cracking the volatilized chemical species. Experimental work confirmed that biomass and MSW could be feasible and desirable feedstocks for the pyrolysis/gasification process as these feedstocks can be easily treated compared to coal. To extend this understanding to a more practical level, various feedstocks were tested in a tubular reactor and drop tube reactor under various experimental conditions.

Abstract Bamboo has been considered a potential feedstock of energy for the future. It can be subjected to the pyrolysis for biofuels production. The thermogravimetric analysis (TGA) combined with differential thermogravimetric analysis (DTG) for bamboo was carried out prior to pyrolysis. The thermal degradation of bamboo was mainly between 230 and 420 °C. The conventional pyrolysis of bamboo was investigated in a bubbling fluidized-bed reactor using silica sand. The product distribution and composition of pyrolysis bio-oil were dependent on biomass component and operating conditions such as pyrolysis temperature, fluidization velocity, and particle size of biomass. The fractional catalytic pyrolysis of bamboo was also studied to upgrade the pyrolysis vapor, using HZSM-5 and red mud. The highest yield of bio-oil was 54.03 wt% compared to 49.14 wt% and 50.34 wt% of HZSM-5 and red mud catalyst, respectively. In the red mud catalytic pyrolysis, the oxygen content was rejected from pyrolysis vapor mostly via decarboxylation to produce more CO2 than CO; in contrast, for the HZSM-5 catalytic pyrolysis, the production of CO through decarbonylation was more favored than CO2. The main composition of catalytic pyrolysis bio-oil was 4-vinylphenol, which was employed as a raw material source to synthesize valuable material for energy storage.

Abstract A change in the thermal environment of an urban area affects health, living conditions, and energy consumption. In urban planning, urban parks are one of the methods for improving the thermal environment and saving cooling energy. Urban park construction can mitigate temperature, but it also causes urban development by increasing local attractiveness. To achieve efficient energy saving through parks in urban planning, the purpose of this study is to investigate the relationship between building energy consumption and urban characteristics both before and after the construction of an urban park. This study targeted Seoul's Gyeongui line forest, which was recently converted into a linear park on the former railway as an urban regeneration project. We analyzed the relationship between energy consumption and urban characteristics using a regression model, focusing on the changes before and after the construction. In this study, urban characteristics include environment, building physical characteristics, and economic variables. The results show that the construction of the urban park reduced not only temperature but also building energy consumption. The energy reduction effect of the park was limited to a marginal distance. Meanwhile, the urban park construction caused land prices to rise and prompted new development, and this changed the urban characteristics of the area and affected energy consumption. Despite changes in urban characteristics, urban park planning is an effective methods of reducing the energy consumption involved in cooling urban areas. We recommend comprehensive consideration of the urban factors when making park policy to reduce urban temperature and energy consumption.

To meet international efforts to prevent climate change, the South Korean government is seeking to transform its main power source from coal to natural gas (NG), which emits less carbon dioxide (CO2) than coal. The government needs information about public preferences for increasing NG-fired generation. Therefore, the purpose of this paper is to provide the government with this information by gathering the data on public preferences for increasing NG-fired generation for reducing CO2 emissions, analyzing these data, and obtaining the implications from the analysis. To this end, a survey of 1000 people, after explaining the merits and demerits of NG-fired power, were asked to determine the proper ratio of NG-fired generation by choosing one of six examples: lower than 10%, 10%–20%, 20%–30%, 30%–40%, 40%–50%, and higher than 50%. An interval data model was employed to deal with the data. The average value of the ratio was estimated to be 26.7% with statistical significance, which is greater than the actual value of 22.2% from 2017. Finally, whether and how much some variables such as education level, age, gender, and income level of the respondent affected their preferences for NG-fired generation were investigated.