• Energy Research
• Open Source close
• Embargo close
• engineering and technology close
• NL close
• IT close
• IR close

AbstractCalcium oxide supported on ZrO2 is a highly active catalyst for base‐catalyzed reactions such as aldol‐type reactions and transesterification reactions. The role of key parameters during preparation, that is, impregnation versus precipitation, heat treatment, and metal oxide loading on the basicity and catalytic activity were investigated for CaO supported on ZrO2. An impregnation of 10 wt % CaO on monoclinic zirconia followed by heat treatment at 600 °C resulted in high activity for the self‐condensation reaction of acetone. An evaluation of a series of CaO/ZrO2 samples with different loadings showed that the activity increased for impregnated amounts per gram catalyst of 0–10 wt % CaO, and at higher loading the activity decreased as a result of a decrease in dispersion. The number of strong base sites (calculated from CO2 desorbed at temperatures higher than 625 °C) correlated with the activity. For MgO, CaO, SrO, and BaO on zirconia the catalytic activity increased as the ionic radius of the metal cation increased, suggesting the impact of base strength on catalytic performance.

AbstractTransition to a bio‐based economy will create new demand for biomass, e.g. the increasing use of bioenergy, but the impacts on existing markets are unclear. Furthermore, there is a growing public concern on the sustainability of biomass. This study proposes a methodological framework for mapping national biomass flows based on domestic production‐consumption and cross‐border trade, and respective share of sustainably‐certified biomass. A case study was performed on the Netherlands for 2010‐2011, focusing on three categories: (i) woody biomass, (ii) oils and fats, and (iii) carbohydrates. Between 2010‐2011 few major shifts were found, besides the increasing biofuel production. The share of sustainably‐certified feedstock is growing in many categories. Woody biomass used for energy amounted to 3.45 MT, including 1.3 MT imported wood pellets ( >85% certified). About 0.6 MT of oils and fats and 1.2 MT (estimation) of carbohydrates were used for biofuel production. It is assumed that only certified materials were used for biofuel production. For non‐energy purpose, more than 50% of woody biomass used was either certified or derived from recycled streams. Certified oils has entered the Dutch food sector since 2011, accounted for 7% of total vegetable oils consumption. It is expected that carbohydrates will also be certified in the near future. Methodological challenges encountered are: inconsistency in data definitions, lack of coherent cross‐sectorial reporting systems, low reliability of bilateral trade statistics, lack of transparency in biomass supply chains, and disparity in sustainability requirements. The methodology may be expanded for future projection in different scenarios. © 2013 Society of Chemical Industry and John Wiley & Sons, Ltd

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.

The aim of this study was to analyze whether, and if so, in what way risks would influence the design,costs and routing of CO2pipelines. This article assesses locational and societal risks of CO2pipelinetransport and analyses whether rerouting or implementing additional risk mitigation measures is themost cost-effective option. The models EFFECTS and RISKCURVES are used to estimate the dispersion andrisk, respectively. The pipeline routes are optimized by using the least cost path function in ArcGIS.This article evaluates three case studies in the Netherlands. The results show that pipelines transportingdense phase CO2(8–17 MPa) with a minimal amount of risk mitigation measures already meet the 10−6locational risk required in the Netherlands. 10−6locational risks of 135 m are calculated for intermediatepumping stations, handling 450 kg CO2/s (about 14 Mt CO2/year). In all the cases, pumping stations couldbe located along the pipeline route without any problem.For the cases studied transporting gaseous CO2(1.5–3 MPa) leads to larger 10−6locational risk distancesthan transporting dense phase CO2. This is caused by the large momentum behind a dense phase CO2release, leading to smaller but higher jet and to a higher mixing rate with the surrounding air than for agaseous CO2release.Based on our analysis, it can be concluded that dense phase CO2transport is safe if it is well organized.The risks are manageable and widely accepted under current legislation. In addition, risk mitigationmeasures, like marker tape and increased surveillance, are available which reduce the risk significantlyand increase the costs only slightly. Pipeline routing for gaseous CO2transport appears more challengingin densely populated areas, because larger safety zones are attached to it.

Abstract As main contributors to greenhouse gas emissions, power and transportation are crucial sectors for energy system decarbonization. Their interaction is expected to increase significantly: plug-in electric vehicles add a new electric load, increasing grid demand and potentially requiring substantial grid upgrade; hydrogen production for fuel cell electric vehicles or for clean fuels synthesis could exploit the projected massive power overgeneration by intermittent and seasonally-dependent renewable sources via Power-to-Hydrogen. This work investigates the infrastructural needs involved with a broad diffusion of clean mobility, adopting a sector integration perspective at the national scale. The analysis combines a multi-node energy system balance simulation and a techno-economic assessment of the infrastructure to deliver energy vectors for mobility. The article explores the long-term case of Italy, considering a massive increase of renewable power generation capacity and investigating different mobility scenarios, where low-emission vehicles account for 50% of the stock. First, the model solves the energy balances, integrating the consumption related to mobility energy vectors and taking into account power grid constraints. Then, an optimal infrastructure is identified, composed of both a hydrogen delivery network and a widespread installation of charging points. Results show that the infrastructural requirements bring about investment costs in the range of 43–63 G€. Lower specific costs are associated with the exclusive presence of FCEVs, whereas the full reliance on BEVs leads to the most significant costs. Scenarios that combine FCEVs and BEVs lie in between, suggesting that the overall power + mobility system benefits from the presence of both drivetrain options.

The optical and photovoltaic properties of Si NCs / SiC multilayers (MLs) are investigated using a membrane-based solar cell structure. By removing the Si substrate in the active cell area, the MLs are studied without any bulk Si substrate contribution. The occurrence is confirmed by scanning electron microscopy and light-beam induced current mapping . Optical characterization combined with simulations allows us to determine the absorption within the ML absorber layer, isolated from the other cell stack layers. The results indicate that the absorption at wavelengths longer than 800 nm is only due to the SiC matrix. The measured short-circuit current is significantly lower than that theoretically obtained from absorption within the ML absorber, which is ascribed to losses that limit carrier extraction. The origin of these losses is discussed in terms of the material regions where recombination takes place. Our results indicate that carrier extraction is most efficient from the Si NCs themselves, whereas recombination is strongest in SiC and residual a-Si domains . Together with the observed onset of the external quantum efficiency (EQE) at 700-800 nm, this fact is an evidence of quantum confinement in Si NCs embedded in SiC on device level.

AbstractThis study compared the economic and environmental impacts of torrefaction on bioenergy supply chains against conventional pellets for scenarios where biomass is produced in Mozambique, and undergoes pre‐processing before shipment to Rotterdam for conversion to power and Fischer‐Tropsch (FT) fuels. We also compared the impacts of using different land quality (productive and marginal) for feedstock production, feedstocks (eucalyptus and switchgrass), final conversion technologies (XtY and CXtY) and markets (the Netherlands and Mozambique). At current conditions, the torrefied pellets (TOPs) are delivered in Rotterdam at higher cost (7.3–7.5 $/GJ) than pellets (5.1–5.3 $/GJ). In the long term, TOPs costs could decline (4.7–5.8 $/GJ) and converge with pellets. TOPs supply chains also incur 20% lower greenhouse gas (GHG) emissions than pellets. Due to improved logistics and lower conversion investment, fuel production costs from TOPs are lower (12.8–16.9 $/GJFT) than from pellets (12.9–18.7 $/GJFT). Co‐firing scenarios (CXtY) result in lower cost fuel (but a higher environmental penalty) than 100% biomass fired scenarios (XtY). In most cases, switchgrass and the productive region of Nampula provide the lowest fuel production cost compared to eucalyptus and the marginally productive Gaza region. Both FT and ion in Mozambique are more costly than in Rotterdam. For the Netherlands, both FT and power production are competitive against average energy costs in Western Europe. The analysis shows that large‐scale bioenergy production can become competitive against fossil fuels. While the benefits of TOPs are apparent in logistics and conversion, the current higher torrefaction costs contribute to higher biofuel costs. Improvements in torrefaction technology can result in significant performance improvements over the future chain. © 2013 Society of Chemical Industry and John Wiley & Sons, Ltd

Abstract Latest trends in the photovoltaic sector see the use of innovative photovoltaic technologies with extended spectral responsivity ranging from 300 to 1200 nm for non-concentrating terrestrial applications, and to 1800 nm for concentrating PV and space applications. As a consequence, an update of the IEC 60904-9 standard is ongoing with a definition of new spectral ranges for the assessment of the spectral match. This poses new challenges to laboratories and research centers on whether or not they still are able to accurately measure the spectral mismatch of their sun simulator in the newly-defined spectral regions. Prior to that, there is a need to understand if the commercially available spectroradiometers are ready to extend their measurement range as prescribed by the forthcoming new standard. This paper analyses two options for an extension of the spectrum characterisation of solar simulators to 300–1200 nm and compares them in terms of spectral match of global normal irradiance (GNI) spectra acquired under natural sunlight by eight spectroradiometers during the 6th European Spectroradiometer Intercomparison. The acquired spectra are also compared in terms of an index of consistency of the spread of the measured spectra with the estimated measurement uncertainty, hereafter named as performance statistics E n . Results show that all investigated laboratories assure the equivalence of the spectral match classification well below the 25% limit corresponding to class-A simulators. When considering the more stringent class-A+ corresponding to a 12.5% limit, one of the two considered options that rearranges the 300–1200 nm spectral range into 6 bands appears to still assure the equivalence of the class A+ limits among considered instruments. The E n performance index analysis highlights some inconsistencies with the estimated measurement uncertainty or instrument drifts from the expected performance, and the need of further improvements in calibration, set up and measurement procedures.