• Energy Research
• Open Access close
• Embargo close
• DK close
• PK close
• Technical University of Denmark close

Two types of wind lidar?s have become available for ground-based vertical mean wind and turbulence profiling. A continuous wave (CW) wind lidar, and a pulsed wind lidar. Although they both are build upon the same recent 1.55 μ telecom fibre technology, they possess fundamental differences between their temporal and spatial resolution capabilities. A literature review of the two lidar systems spatial and temporal resolution characteristics will be presented, and the implication for the two lidar types vertical profile measurements of mean wind and turbulence in the lower atmospheric boundary layer will be discussed.

Degradation issues correlated to microstructural changes are the main obstacles to solid oxide fuel cell and electrolyser applications, making their identification and understanding fundamental steps. Coupling experimental activities with modelling, this work analyses the state-of-the-art Ni-YSZ (Yttria-Stabilized Zirconia)/YSZ/CGO (Cerium Gadolinium Oxide)/LSCF (Lanthanum Strontium Cobalt Ferrite)-CGO-based cell after 1000 h of galvanostatic electrolysis operation at fixed temperature and high steam composition in the inlet gas. Following a multiscale approach, the system behaviour is characterized through electrochemical impedance spectra and polarization curves as well as studying microstructure evolution, with a focus on Ni-cermet functional layer in view of Ni instability detected as the main degradation cause. A comparison with a cell consisting of the same initial geometrical structure and materials but aged in fuel cell mode allows to highlight the influence of operating mode and parameters on Ni-YSZ microstructure. Ni particle size and phase fraction variations experimentally observed on the electrode surface are correlated to water content and applied polarization simulated local values. Ni uneven distribution at the electrolyte interface and particle coarsening, above all, lead to an increase in polarization loss under electrolysis and fuel cell mode, respectively, since both penalise the charge transfer reaction and migration.

The penetration level of wind power into the power system over the world have been increasing very fast in the last few years and is still keeping the fast growth rate. It is just a matter of time that the wind power will be comparable to the conventional power generation. Therefore, many transmission system operators (TSOs) over the world have come up the grid codes to request the wind power plants (WPPs) to have more or less the same operating capability as the conventional power plants. The grid codes requirements from other TSOs are under development. This paper covers the steady state operation and low voltage ride through (LVRT) for the WPPs. The discussion of coping with the grid codes requirements is presented to come up with the grid codes complied WPPs solutions.

Abstract The increased complexity of electric distribution networks, entails higher requirements on the interoperability between the information and communication technology (ICT) infrastructure and the power system. In current literature, distribution network monitoring methods require reliable operation of the ICT infrastructure, and depend on load estimation accuracy in cases of unavailable measurements. In the low voltage (LV) distribution network, ICT infrastructure is sensible to noise and congestion, and load estimation is challenged by irrational consumer behaviour. Such limitation impede the implementation of currently proposed methods. The conditions are complicated further when considering the impact of emerging data privacy concerns that can prevent utilization of household consumption data. Therefore, this work proposes a novel method for voltage magnitude interval estimation by utilizing the information from existing data acquisition systems in LV distribution networks. The proposed method is based on knowledge of load connection, and estimates the entire radial feeder voltage magnitude conditions from measurements of voltage magnitudes from minimum one node. The proposed method can therefore be implemented on existing ICT infrastructure and effectively keeps the privacy of consumers consumption profiles. The ability of the proposed method to estimate the feeder voltage interval is illustrated by an example and evaluated using Monte Carlo simulations for different meter distribution and accuracy scenarios.

The critical roles of Li-salts in lithium batteries, particularly Li–metal, Li–O2, and Li–S batteries, are reviewed.

UNAFLOW(UNsteady Aerodynamics for FloatingWind) is a joint EU-IRPWIND founded experiment on wind turbine rotor unsteady aerodynamics. It brings together four different academic contributors: Energy research Centre of the Netherlands (ECN), DTU Wind Energy, University of Stuttgart (USTUTT) and Politecnico di Milano (PoliMi) sharing knowledge both in numerical modelling and in experimental tests design, allowing direct numerical and experimental comparison. The experimental tests carried out for UNAFLOW are of the same type of the ones carried out during the ongoing EU H2020 project LIFES50+ [1], regarding both the unsteady behaviour of the 2d blade section and the entire turbine rotor, although with improved setup and wider test matrix. The project partners are already currently jointly collaborating in the AVATAR project [2], developing and validating numerical models of different accuracy level. The numerical models used in the UNALFOW project range from engineering tool (eg. BEM) to high fidelity CFD methods. Numerical simulations are used both in the design of experiment phase and in the results analysis allowing for an in depth understanding of the experimental findings through advanced modelling approach. The UNAFLOW project, together with a new understanding of the unsteady behaviour of the turbine rotor aerodynamics, will provide also an open database to be shared among the scientific community for future analysis and new models validation.

Nature-based solutions may actively reduce hydro-meteorological risks in urban areas as a part of climate change adaptation. However, the main reason for the increasing uptake of this type of solution is their many benefits for the local inhabitants, including recreational value. Previous studies on recreational value focus on studies of existing nature sites that are often much larger than what is considered as new NBS for flood adaptation studies in urban areas. We thus prioritized studies with smaller areas and nature types suitable for urban flood adaptation and divided them into four common nature types for urban flood adaptation: sustainable urban drainage systems, city parks, nature areas and rivers. We identified 23 primary valuation studies, including both stated and revealed preference studies, and derived two value transfer functions based on meta-regression analysis on existing areas. We investigated trends between values and variables and found that for the purpose of planning of new NBS the size of NBS and population density were determining factors of recreational value. For existing NBS the maximum travelling distance may be included as well. We find that existing state-of-the-art studies overestimate the recreational with more than a factor of 4 for NBS sizes below 5 ha. Our results are valid in a European context for nature-based solutions below 250 ha and can be applied across different NBS types and sizes.