• Energy Research
• 11. Sustainability close
• EU close
• PL close
• AT close

Survey of Timisoara City residents conducted by the West University of Timisoara for the SMARTEES project between March and August 2020 (n=439). The survey was aimed at (1) understanding individual behaviours related to the environment and energy in general, and (2) assessing how people make decisions about energy efficiency measures in particular (i.e., perceptions about existing regional or national programmes aiming to improve the energy efficiency of homes through upgrades to the building fabric with a neighbourhood-scale heat network retrofit). It includes data about citizens' attitudes, behaviours and social networks. Files include the dataset in two formats: .csv and .sav. The questionnaire, a data dictionary and background and sampling details are also included.

This dataset was prepared by TNO as a contribution to the H2020 project CHE and the H2020 project VERIFY. The basis is a high-resolution (~1x1 km) emission inventory providing CO2 and CO (from fossil fuels and biofuels separately) over western Europe (2ºW - 19ºE, 47ºN - 56ºN). The reported emissions by European countries to UNFCCC (CO2) and to EMEP/CEIP (CO) have been used and where needed gap-filled or replaced with emission data from the GAINS model. These country-level emissions are disaggregated in space using a consistent spatial distribution methodology, whereas large point sources are listed with their exact locations. This approach is similar to the one described by Kuenen et al., (ACP, 2014). Emissions are reported per GNFR sector, with an extra split for road transport. The emission grids that are part of this dataset are a variation on the base grid, representing the uncertainty in the emission data. Each grid is equally plausible. The grids have been created using a Monte Carlo approach. The uncertainties in the underlying data used to create the base grid (emissions: activity data and emission factors, spatial proxies) have been collected (either from country reports or based on expert judgement). Through the Monte Carlo simulation these uncertainties, taking into account error correlations between some sub-sectors, are combined to create ten new emission grids. The spread in emissions between these emission maps gives an indication of the uncertainty in the emissions. The grid files (in .csv and .nc format) contain annual total emissions per grid cell for the year 2015. A separate file has been prepared for each ensemble member in the Monte Carlo simulation (indicated with M). The unit in the files is kg/yr. A detailed description of the Monte Carlo simulation is presented in: Super, I., Dellaert, S. N. C., Visschedijk, A. J. H., and Denier van der Gon, H. A. C.: Uncertainty analysis of a European high-resolution emission inventory of CO2 and CO to support inverse modelling and network design, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2019-696, in review, 2019. N.B. It is important to note that 10 maps are not sufficient to describe the sometimes complex uncertainty structures, for example in the case of lognormal uncertainty distributions. The interpretation of the uncertainty based on these 10 maps should therefore be done with care. NB. Despite efforts to prevent negative emissions to occur in the grid maps, some negative values are still present. In local studies this might cause some issues, and we recommend to set negative emissions to zero in those cases.

Data reported by companies on the production, import, export, destruction and feedstock use of fluorinated greenhouse gases in the European Union during the years 2007-2019. The primary data is synthesised and aggregated at EU level and used to assess the progress on HFC phase-down made under both EU legislation and the UN framework as part of the Kigali Amendment to the Montreal Protocol. The data also details the amount of F-gases supplied to various industrial applications.

The dataset includes 90 global food system and land use scenarios developed with the model BioBaM-GHG 2.0. The scenarios have been developed for assessing the global potential of forest regeneration for climate mitigation to 2050 under various food system pathways, i.e. diets, crop yield developments, land requirements for energy crops, and two variants of grassland use. The scenarios include the following data on country level: Land use and land-use change, cropland area by crop group, grazing area by quality classes, crop production by crop groups, crop consumption by crop groups and use types, crop wastes (losses), net imports/exports, production and consumption of animal products, grass supply and demand, GHG emissions from land-use change, GHG emissions from agricultural activities, and total cumulated GHG emissions. The main model result in this context, cumulative carbon sequestration from forest regeneration until 2050, is calculated as difference between the parameters "GHG emissions from land use change (cumulative) (Mt CO2e)" and "GHG emissions from land use change excluding C stock changes from natural succession (cumulative) (Mt CO2e)". Please refer to the related publication "Exploring the option space for land system futures at regional to global scales: The diagnostic agro-food, land use and greenhouse gas emission model BioBaM-GHG 2.0" (Kalt et al., 2021 - currently under review at Ecological Modelling) for further information. This work was funded by the Austrian Science Fund (FWF) within project P29130-G27 GELUC.

This paper evaluated the environmental effects of socially responsible investments (SRIs) in European countries and analyzed the differentiation between them in terms of SRIs and selected features in the environmental dimension. The first section of the paper discusses contemporary trends in Europe and in certain European countries, whilst the second compares SR environmental investments and environmental factors in selected European countries from a multidimensional perspective. The aim of the study was to identify and evaluate these trends as well as to find similarities and differences between European countries, and subsequently to indicate groups of countries with similar approaches to pro-ecological investments. In order to solve the problem, descriptive and multidimensional statistical methods were used, namely correspondence analysis (CA). Although the research results clearly revealed upward tendencies in the volume of SR environmental investments in the analyzed period, they nonetheless represent a relatively low share in the total number of socially responsible investments. The overall growth in SRIs in Europe may have resulted from the more intense activities of policymakers in some countries as a consequence of concluding agreements reached during the 21st Conference of the Parties (COP21) in 2015. The results of the study also revealed no significant correlations between SR environmental investments and environmental variables among the European countries analyzed; hence, there is no substantial evidence that investors’ assets contribute to the improvement of the environment.

This study focuses on formulating the most sustainable concrete by incorporating recycled concrete aggregates and other products retrieved from construction and demolition (C&D) activities. Both recycled coarse aggregates (RCA) and recycled fine aggregates (RFA) are firstly used to fully replace the natural coarse and fine aggregates in the concrete mix design. Later, the cement rich ultrafine particles, recycled glass powder and mineral fibres recovered from construction and demolition wastes (CDW) are further incorporated at a smaller rate either as cement substituent or as supplementary additives. Remarkable properties are noticed when the RCA (4–12 mm) and RFA (0.25–4 mm) are fully used to replace the natural aggregates in a new concrete mix. The addition of recycled cement rich ultrafines (RCU), Recycled glass ultrafines (RGU) and recycled mineral fibres (RMF) into recycled concrete improves the modulus of elasticity. The final concrete, which comprises more than 75% (wt.) of recycled components/materials, is believed to be the most sustainable and green concrete mix. Mechanical properties and durability of this concrete have been studied and found to be within acceptable limits, indicating the potential of recycled aggregates and other CDW components in shaping sustainable and circular construction practices. The authors wish to acknowledge the financial support from EU Horizon 2020 Project VEEP ‘‘Cost-Effective Recycling of C&DW in High Added Value Energy Efficient Prefabricated Concrete Compo-nents for Massive Retrofitting of our Built Environment” (No.723582).

IT technologies related to Industry 4.0 facilitate the implementation of the framework for sustainable manufacturing. At the same time, Industry 4.0 integrates IT processes and systems of production companies with IT solutions of cooperating companies that support a complete manufactured product life cycle. Thus, the implementation of sustainable manufacturing implies a rapid increase in interfaces between IT solutions of cooperating companies. This, in turn, raises concerns about security among manufacturing company executives. The lack of a recognized methodology supporting the decision-making process of choosing the right methods and means of cybersecurity is, in effect, a significant barrier to the development of sustainable manufacturing. As a result, the propagation of technologies in Industry 4.0 and the implementation of the sustainable manufacturing framework in companies are slowing down significantly. The main novelty of this article, addressing the above deficiencies, is the creation, using the combined DEMATEL and ANP (DANP) and PROMETHEE II methods, of a ranking of the proposed three groups of measures, seven dimensions and twenty criteria to be implemented in companies to ensure cybersecurity in Industry 4.0 and facilitate the implementation of the sustainable production principles. The contribution of Industry 4.0 components and the proposed cybersecurity scheme to achieve the Sustainable Development goals, reducing the carbon footprint of companies and introducing circular economy elements was also indicated. Using DANP and PROMETHEE II, it can be concluded that: (i) the major criterion of cybersecurity in companies is validation and maintaining electronic signatures and seals; (ii) the most crucial area of cybersecurity is network security; (iii) the most significant group of measures in this regard are technological measures.

Abstract. Reliable quantification of the sources and sinks of greenhouse gases, together with trends and uncertainties, is essential to monitoring the progress in mitigating anthropogenic emissions under the Paris Agreement. This study provides a consolidated synthesis of CH4 and N2O emissions with consistently derived state-of-the-art bottom-up (BU) and top-down (TD) data sources for the European Union and UK (EU27+UK). We integrate recent emission inventory data, ecosystem process-based model results, and inverse modelling estimates over the period 1990–2018. BU and TD products are compared with European National GHG Inventories (NGHGI) reported to the UN climate convention secretariat UNFCCC in 2019. For uncertainties, we used for NGHGI the standard deviation obtained by varying parameters of inventory calculations, reported by the Member States following the IPCC guidelines recommendations. For atmospheric inversion models (TD) or other inventory datasets (BU), we defined uncertainties from the spread between different model estimates or model specific uncertainties when reported. In comparing NGHGI with other approaches, a key source of bias is the activities included, e.g. anthropogenic versus anthropogenic plus natural fluxes. In inversions, the separation between anthropogenic and natural emissions is sensitive to the geospatial prior distribution of emissions. Over the 2011–2015 period, which is the common denominator of data availability between all sources, the anthropogenic BU approaches are directly comparable, reporting mean emissions of 20.8 Tg CH4 yr−1 (EDGAR v5.0) and 19.0 Tg CH4 yr−1 (GAINS), consistent with the NGHGI estimates of 18.9 ± 1.7 Tg CH4 yr−1. TD total inversions estimates give higher emission estimates, as they also include natural emissions. Over the same period regional TD inversions with higher resolution atmospheric transport models give a mean emission of 28.8 Tg CH4 yr−1. Coarser resolution global TD inversions are consistent with regional TD inversions, for global inversions with GOSAT satellite data (23.3 Tg CH4yr−1) and surface network (24.4 Tg CH4 yr−1). The magnitude of natural peatland emissions from the JSBACH-HIMMELI model, natural rivers and lakes emissions and geological sources together account for the gap between NGHGI and inversions and account for 5.2 Tg CH4 yr−1. For N2O emissions, over the 2011–2015 period, both BU approaches (EDGAR v5.0 and GAINS) give a mean value of anthropogenic emissions of 0.8 and 0.9 Tg N2O yr−1 respectively, agreeing with the NGHGI data (0.9 ± 0.6 Tg N2O yr−1). Over the same period, the average of the three total TD global and regional inversions was 1.3 ± 0.4 and 1.3 ± 0.1 Tg N2O yr−1 respectively, compared to 0.9 Tg N2O yr−1 from the BU data. The TU and BU comparison method defined in this study can be operationalized for future yearly updates for the calculation of CH4 and N2O budgets both at EU+UK scale and at national scale. The referenced datasets related to figures are visualized at https://doi.org/10.5281/zenodo.4288969 (Petrescu et al., 2020).