• Energy Research
• 12. Responsible consumption close
• PL close
• AT close

Although European energy policy supports the reduction of energy consumption, the current economic and political situation in Poland and uncertainty related to the origin of energy sources do not support it. Therefore, the aim of this paper is to identify and assess the factors that affect the energy-saving behaviour of Polish consumers in the process of energy consumption. The research problem concerns the specificity of behaviours that are part of new trends in consumption, such as greening and the ethical dimension of consumption. The research question arises as to what the social responsibility of consumers is in the process of energy consumption. The research problem comes down to the question of factors that determine the behaviour of an individual consumer in the energy market. In order to realise the indicated purpose of the article, a conceptual research model was built and direct research was conducted using the research method, which was an online survey (CAWI). The research was run among 1422 individual consumers. After verifying 14 research hypotheses, it can be concluded that energy-saving behaviour is influenced in similar ways by a set of factors. In the paper there are findings which show that the generally understood energy-saving behaviour (Y1—at home and Y2—off-site) is influenced by the following factors: X1—energy-saving knowledge, X3—green consumer values, X5—social influence, X6—beliefs, and X7—consumer awareness. The specific mechanism of influence of each of the dominant factors is that the higher the intensity of these factors in consumer behaviour, the more actions are taken to save energy inside or outside the home. However, X2—energy-saving cost perception and X4—materialism presents this influence mechanism only for Y1—energy-saving behaviour at home.

Deammonification for nitrogen removal in municipal wastewater in temperate and cold climate zones is currently limited to the side stream of municipal wastewater treatment plants (MWWTP). This study developed a conceptual model of a mainstream deammonification plant, designed for 30,000 P.E., considering possible solutions corresponding to the challenging mainstream conditions in Germany. In addition, the energy-saving potential, nitrogen elimination performance and construction-related costs of mainstream deammonification were compared to a conventional plant model, having a single-stage activated sludge process with upstream denitrification. The results revealed that an additional treatment step by combining chemical precipitation and ultra-fine screening is advantageous prior the mainstream deammonification. Hereby chemical oxygen demand (COD) can be reduced by 80% so that the COD:N ratio can be reduced from 12 to 2.5. Laboratory experiments testing mainstream conditions of temperature (8–20°C), pH (6–9) and COD:N ratio (1–6) showed an achievable volumetric nitrogen removal rate (VNRR) of at least 50 gN/(m3∙d) for various deammonifying sludges from side stream deammonification systems in the state of North Rhine-Westphalia, Germany, where m3 denotes reactor volume. Assuming a retained Norganic content of 0.0035 kgNorg./(P.E.∙d) from the daily loads of N at carbon removal stage and a VNRR of 50 gN/(m3∙d) under mainstream conditions, a resident-specific reactor volume of 0.115 m3/(P.E.) is required for mainstream deammonification. This is in the same order of magnitude as the conventional activated sludge process, i.e., 0.173 m3/(P.E.) for an MWWTP of size class of 4. The conventional plant model yielded a total specific electricity demand of 35 kWh/(P.E.∙a) for the operation of the whole MWWTP and an energy recovery potential of 15.8 kWh/(P.E.∙a) through anaerobic digestion. In contrast, the developed mainstream deammonification model plant would require only a 21.5 kWh/(P.E.∙a) energy demand and result in 24 kWh/(P.E.∙a) energy recovery potential, enabling the mainstream deammonification model plant to be self-sufficient. The retrofitting costs for the implementation of mainstream deammonification in existing conventional MWWTPs are nearly negligible as the existing units like activated sludge reactors, aerators and monitoring technology are reusable. However, the mainstream deammonification must meet the performance requirement of VNRR of about 50 gN/(m3∙d) in this case.

Sewage sludge produced in municipal sewage treatment plants, because of its physicochemical and sanitary properties, is a serious threat to the environment. In order to neutralize it, various methods of processing are used, which directly affect the quantity and quality of produced sewage sludge, which in the final stage can be used naturally. Properly managed sludge management is presented on the example of a sewage treatment plant, conducting the methane fermentation process with the production of biogas.

The aim of this publication was determining the impact of implementation of the ISO 14001 standard requirements on creating sustainable supply chains in the textile industry. The research process included the development of research tools such as questionnaires. Surveys of anonymous nature were sent by e-mail to top management representatives organizations operating in the south-eastern Poland and Slovakia who hold a certified quality management system according to ISO 14001. The research process carried out as well as the analysis of the obtained results allowed to respond to the research questions. As a resoult it can be stated that the ISO 14001 standard is an instrument that has a noticeable impact on improving the concept of sustainable supply chain management (SSCM) in the textile industry.

The application of multi-floor manufacturing (MFM) in huge cities is related to the rational use of urban areas and the solution to traffic problems. The operation of the city MFM clusters depends on the efficiency of production and transport management considering technical, economic, environmental, and other factors. The primary goal of this paper was to identify and analyze the drivers of sustainable supply chains (SSCs) that influence or encourage the design of sustainable processes in city MFM clusters under uncertainty in supply chains. This paper presents an SSC performance model for city MFM clusters under uncertainty. The proposed model is universal and is based on material flow analysis (MFA) methodology. The presented analysis helps to determine the conditions for rhythmic deliveries with the use of the multi-IRTs. The coefficients of rhythmic deliveries for multiple intelligent reconfigurable trolleys (IRTs) and the capacity loss of freight elevators allow us to periodically assess the sustainability processes in city MFM clusters related to the flow materials. These assessments are the basis for the decision-making and planning of SSCs.

In 2021, the European Commission set out the direction of changes in the field of European enterprise activities by establishing the principles of Industry 5.0. One of the indicated directions was the implementation of sustainable development principles in European industry. The aim of this article is to examine the level and nature of competences in the field of sustainable development among students at two Lublin universities: the Lublin University of Technology and the University of Life Sciences in Lublin. This is to enable the assessment of students’ preparation for the implementation of sustainable development principles in their future professional activities. The research sought to determine the relationship between the type of university and the competences of students, through the self-assessment of competences. The conceptualization and operationalization of competences in the field of sustainable development was based on the de Haan and Cebrian models, respectively. The tool used was the author’s own questionnaire based on the self-assessment of 25 statements, grouped into five areas of competence: knowledge, action, values and ethics, emotions and systems thinking. The results of the study confirmed differences between students in the areas of knowledge and activity. However, a relationship between the type of university and self-esteem in areas related to systemic thinking, emotions, and ethics and values was not found. Various self-assessment patterns (clusters) were observed in individual areas among the respondents. Differences in the assessment of the statements indicated the existence of factors that influenced responses. The results of the study confirmed the usefulness of the tool in identifying competency gaps of students based on which the tool can be recommended for use in the design of study programs.

The European Union is currently in the process of transformation toward a circular economy model in which different areas of activity should be integrated for more efficient management of raw materials and waste. The wastewater sector has a great potential in this regard and therefore is an important element of the transformation process to the circular economy model. The targets of the circular economy policy framework such as resource recovery are tightly connected with the wastewater treatment processes and sewage sludge management. With this in view, the present study aims to review existing indicators on resource recovery that can enable efficient monitoring of the sustainable and circular solutions implemented in the wastewater sector. Within the reviewed indicators, most of them were focused on technological aspects of resource recovery processes such as nutrient removal efficiency, sewage sludge processing methods and environmental aspects as the pollutant share in the sewage sludge or its ashes. Moreover, other wide-scope indicators such as the wastewater service coverage or the production of bio-based fertilizers and hydrochar within the wastewater sector were analyzed. The results were used for the development of recommendations for improving the resources recovery monitoring framework in the wastewater sector and a proposal of a circularity indicator for a wastewater treatment plant highlighting new challenges for further researches and wastewater professionals.

This work intended to explore some motivations that influence people’s eating habits towards sustainability. This was an observational, cross-sectional study, carried out by questionnaire survey on a non-probabilistic sample of 10,067 participants from 13 countries (Argentina, Brazil, Croatia, Greece, Hungary, Latvia, Lithuania, Poland, Portugal, Serbia, Slovenia, Romania and United States). Results indicated that people prefer fresh local foods from the season, being important because it allows transportation and storage to be reduced, which in many cases implies refrigeration systems and consequent energy expenditure. Although people avoid food waste at home, the awareness for the waste at restaurants still needs to be improved. Consumers seem to prefer foods that have been produced and packed in sustainable ways but still give importance to the package—understandable for food products. The results also indicated significant differences in the food choice motivations between groups for all sociodemographic variables tested (age, sex, marital status, education, professional area, living environment and country), but the association was high only for variable country. Additionally, a tree classification analysis allowed to identify the relative importance of the influential variables on the sustainable food choices, with country being the most important, followed by age and sex. Additionally, discriminant function analysis allowed establishing a model for the relation between country and six variables accounting for preservation of biodiversity, respect for life, save natural resources, save energy, reduce industrial pollution and minimal packaging. Although with some limitations, this study brings valuable insight into some aspects linked with sustainable food choices on a number of countries and how people shape their food choices according to some sustainability issues.