• Energy Research
• 12. Responsible consumption close
• 6. Clean water close
• PL close
• CZ close
• Energies close

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emitting. The use of electric vehicles in car-sharing fleets can reduce carbon dioxide emissions from 14% to 65% compared to using cars with internal combustion engines. However, the key role during car-sharing trips is played by the driving style of the drivers, which has been omitted from the literature to date. This should be properly regulated by service providers and focus on the proper use of energy from electric vehicle batteries, especially at low temperatures. The article provides support for operators planning to modernize their fleet of vehicles and fills the research gap concerning car-sharing emissions.

Nowadays, heating using wood, briquettes, or pellets is a curious replacement to fossil fuels such as coal, oil, or gas. Unfortunately, the combustion of biofuels, especially in low-power boilers with unstable operating conditions, releases a lot of gas pollutants (e.g., carbon monoxide (CO), nitric oxide (NO), and various organic compounds) that are usually generated due to the incomplete product combustion. The combustion of biofuel in grate boilers with top-down ignition is a new approach, popular in society (mainly used for coal fuels), which improves the combustion process and reduces the amount of pollutants emitted. This study evaluated the impact of ignition techniques on the emission level of gas pollutants during the combustion of wood logs, briquettes, and pellets of pine in grate-based charging boilers. The combination of top ignition mode with pinewood logs allowed us to achieve a reduction of 6% in CO and sulfur dioxide (SO2) emission into the atmosphere. However, the combination of top-down ignition mode with pellets and briquettes produced, in fully operational conditions, 1- to 18-fold higher levels of CO and SO2 respectively, than bottom-up ignition, after an initial period of low level CO and SO2 emissions. During the tests (mainly with ignition from top), substantial emissions of NO were observed of up to 400 mg·m−3 at 10% O2. Therefore, further research is required to decrease emission related to the content of nitrogen in biomass. In this respect, research of impact on the combustion temperature of such emissions is needed.

The article presents results of thermodynamic analysis using a zero-dimensional mathematical models of a negative CO2 emission power plant. The developed cycle of a negative CO2 emission power plant allows the production of electricity using gasified sewage sludge as a main fuel. The negative emission can be achieved by the use this type of fuel which is already a “zero-emissive” energy source. Together with carbon capture installation, there is a possibility to decrease CO2 emission below the “zero” level. Developed models of a novel gas cycle which use selected codes allow the prediction of basic parameters of thermodynamic cycles such as output power, efficiency, combustion composition, exhaust temperature, etc. The paper presents results of thermodynamic analysis of two novel cycles, called PDF0 and PFD1, by using different thermodynamic codes. A comparison of results obtained by three different codes offered the chance to verify results because the experimental data are currently not available. The comparison of predictions between three different software in the literature is something new, according to studies made by authors. For gross efficiency (54.74%, 55.18%, and 52.00%), there is a similar relationship for turbine power output (155.9 kW, 157.19 kW, and 148.16 kW). Additionally, the chemical energy rate of the fuel is taken into account, which ultimately results in higher efficiencies for flue gases with increased steam production. A similar trend is assessed for increased CO2 in the flue gas. The developed precise models are particularly important for a carbon capture and storage (CCS) energy system, where relatively new devices mutually cooperate and their thermodynamic parameters affect those devices. Proposed software employs extended a gas–steam turbine cycle to determine the effect of cycle into environment. First of all, it should be stated that there is a slight influence of the software used on the results obtained, but the basic tendencies are the same, which makes it possible to analyze various types of thermodynamic cycles. Secondly, the possibility of a negative CO2 emission power plant and the positive environmental impact of the proposed solution has been demonstrated, which is also a novelty in the area of thermodynamic cycles.

The activity of enterprises in the energy sector is complicated by the complexity and capital intensity of the resources and processes used. In the current market conditions, an additional challenge is the implementation of sustainable development, including, in particular, environmental and social goals. These circumstances require efficient and effective management, and this is possible, inter alia, thanks to the use of the project management. However, this approach requires not only implementation, but also professional monitoring and control, which is considered and diagnosed in this article. The purpose of this article is to: (a) verify the programme management areas subject to the monitoring and control process; (b) identify and evaluate the effectiveness of the most frequently used methods in the process of monitoring and control of the programme implementation. A qualitative study using a structured interview was conducted among 21 experts involved in the implementation of programmes from the energy sector. The authors found that energy companies monitor and control programmes in key, but traditional areas such as lead times, costs, risks and benefits. They less often refer to ‘soft’ areas of management, such as: work, communication or quality. In terms of the monitoring and control methodology used, significant discrepancies were found between the methods considered effective and those that are most often used in practice. This requires decisive improvement actions. At the same time, it is worth emphasising that the majority of managers prefer compact and quantifiable forms of monitoring and control, such as: earned value method, Gantt chart and comparing plans to results in individual areas. The sector also lacks a systemic approach to programme management, which should be distinguished from single project management, which is why the authors presented their own approach to solving this problem.

The choice of optimal plant species for phytoremediation and organic fertilization plays an important role in stabilizing the functions of soils contaminated with heavy metals. The influence of nickel, cobalt and cadmium on the biomass yield and calorific value of Festuca rubra, heavy metal concentrations in soil and plants and the microbiological, biochemical and physicochemical proprieties of soil were analyzed in a pot experiment. The tolerance index (TI) describing Festuca rubra’s ability to tolerate heavy metals, as well as the translocation (TF), accumulation (AF) and bioaccumulation (BF) factors of heavy metals in Festuca rubra were calculated. The experiment was conducted in two series: In soil fertilized and not fertilized with compost. Nickel and cobalt significantly inhibited the growth and development of Festuca rubra. The experiment demonstrated that this plant species can be grown on soil contaminated with heavy metals. Festuca rubra contained on average 46.05% C, 34.59% O, 5.91% H, 3.49% N, 0.19% S and 9.76% ash. Festuca rubra has a stable calorific value which is not affected by heavy metals; therefore, biomass harvested from heavy metal-polluted soil can be used for energy generation. The calorific value of Festuca rubra ranged from 15.924 to 16.790 MJ kg−1 plant d.m., and the heat of combustion from 17.696 to 18.576 MJ kg−1. It has a stable calorific value which is not affected by heavy metals, therefore biomass harvested from heavy metal-polluted soil can be used for energy generation. Festuca rubra is particularly useful for the phytostabilization of soil contaminated with cadmium and cobalt. Compost minimizes the adverse effects of heavy metal pollution on the microbiological, biochemical and physicochemical properties of soil.

Although European energy policy supports the reduction of energy consumption, the current economic and political situation in Poland and uncertainty related to the origin of energy sources do not support it. Therefore, the aim of this paper is to identify and assess the factors that affect the energy-saving behaviour of Polish consumers in the process of energy consumption. The research problem concerns the specificity of behaviours that are part of new trends in consumption, such as greening and the ethical dimension of consumption. The research question arises as to what the social responsibility of consumers is in the process of energy consumption. The research problem comes down to the question of factors that determine the behaviour of an individual consumer in the energy market. In order to realise the indicated purpose of the article, a conceptual research model was built and direct research was conducted using the research method, which was an online survey (CAWI). The research was run among 1422 individual consumers. After verifying 14 research hypotheses, it can be concluded that energy-saving behaviour is influenced in similar ways by a set of factors. In the paper there are findings which show that the generally understood energy-saving behaviour (Y1—at home and Y2—off-site) is influenced by the following factors: X1—energy-saving knowledge, X3—green consumer values, X5—social influence, X6—beliefs, and X7—consumer awareness. The specific mechanism of influence of each of the dominant factors is that the higher the intensity of these factors in consumer behaviour, the more actions are taken to save energy inside or outside the home. However, X2—energy-saving cost perception and X4—materialism presents this influence mechanism only for Y1—energy-saving behaviour at home.

The article pertains to the utilization of the application potential of MCDM/MCDA (Multi-Criteria Decision Making/Multi-Criteria Decision Analysis) methods in decision-making problems in the field of transport in light of sustainable development. The article consists of a theoretical and an empirical part. As part of the literature studies, a review was carried out on the latest applications of MCDM/MCDA methods for decision-making problems in the field of transport. In the empirical part, a multi-criteria analysis of the placement selection for a strip of expressway located in north-eastern Poland was carried out. For this purpose, a hybrid approach was used, consisting of three selected MCDM/MCDA methods: DEMATEL, REMBRANDT, and VIKOR. The ranking was compared with the results achieved in the EIA report of the investment and the results were obtained by using a different set of MCDM/MCDA methods that were proposed in the first part of the research, i.e., AHP, Fuzzy AHP, TOPSIS, and PROMETHEE. The performed multi-criteria analyses allowed for an eventual multi-dimensional evaluation of the most popular MCDM/MCDA methods currently applied in the field of transport.

A natural radioactivity in thermal water was investigated based on 19 selected thermal waters from Poland. The analysed results show that the radionuclides’ concentrations in the study waters vary over a wide range. The temperature of the waters varies from above 20 °C to above 80 °C. The waters are characterised by different mineralisation, chemical compositions, and belong to different hydrochemical types. There is a good correlation between the water temperature and the depths of the aquifer formations occurrence, suggesting the thermal energy originates from the thermal geogradient. The concentration of radium is well correlated with the water mineralisation. The ratio of radium activity (226Ra/228Ra) in groundwater relates not only the ratio of uranium activity to that of thorium (238U/232Th) in aquifer formation, but also depends on the physical and chemical water properties. Based on the concentration of radon and its transport model, the radiation exposures due to inhalation of 222Rn and its progeny for employees and clients of the spa were assessed. The use of the thermal waters as a drinking resource may be problematic due to the possibility of exceeding the recommended annual committed effective dose 0.1 mSv.

The presented article belongs to the research school of sustainable development economics as a relatively new science discipline within the broader area of heterodox economics. This paper is based on literature studies of homo concepts in economics, sociology and psychology. It identifies a research gap in sustainable economics, especially in sustainable energy management, formulating a novel concept of an economic man involved in energy management called homo energeticus. Homo energeticus concept is verified by empirical evidence at a local level-quantitative research conducted on a sample of 500 households in Lower Silesia region in Poland. The research’s first objective is to build the original author’s methodology on which the shift patterns from homo oeconomicus (neoclassical economics) to homo sustinens (sustainable economics) may be presented and may be used by scientists worldwide. After preparing a method for identifying concept, the second goal is to identify and describe the new concept of behaviour. The main conclusions are the sustainable behavioural pattern is dominating trend observed among households’ local energy management (homo energeticus). The homo energeticus behaviour was confirmed by every third respondent (critical threshold of 70%) or less restrictive and sustainable behaviour model homo sustinens (critical threshold of 50%) by more than 91.8% of whole respondents.

Bioenergy production from animal waste can be a key driver to achieving bio-economy goals. Developing a bio-economy sector could help to create opportunities for a circular system where not only people and the planet will be benefited, but it will also provide economic profitability to farmers, especially in the post-Covid period. To this end, manure production, its nutrient content, and bioenergy potential were estimated, along with their spatial distribution in the Lubelskie province, Poland. Farm-level data were processed and aggregated at the municipality level. Material balance equations were used to calculate the theoretical potential of livestock manure and bioenergy for different use scenarios: (1) Baseline (BC): direct manure application to land, which was compared against (2) Anaerobic Digestion (AD): anaerobic digestion to biogas with digestate returned to the fields (3) AD + Separation (AD + Sep): mechanical separation followed by anaerobic digestion, and (4) Surplus + AD: surplus manure (after application to the fields) is sent to anaerobic digestion. Manure, biogas, electricity, and thermal energy production of the AD scenario were estimated to be 7.5 Mt y−1, 378 Mm3 y−1, 907 GWe y−1, and 997.8 GWth y−1, respectively. The scenario, including mechanical separation followed by anaerobic digestion (AD + Sep), contributed to avoiding emissions to the largest extent (1 Mt CO2 eq), whereas AD outperformed the others in avoiding costs of fertilization. According to the estimated potential and the environmental cost-effectiveness of AD, new plants can be established that will recycle manure through bioenergy production, and, subsequently, the digestate can be applied as organic fertilizer, closing the nutrients cycle.